Re: [B.A.T.M.A.N.] batman-adv debian announcement

Outback Dingo
2008-11-16T16:30:06Z

[-- Attachment #1: Type: text/plain, Size: 1254 bytes --]

ok lastly, it seems possible its very similiar config to bmxd which is what
has been running, though layer 3, im trying to get layer 2 kernel routing
going
originally i used batgat but yet it was problematic, so its safe to say i
could go batman-adv and drop bmxd? as i belive one is not compatible with
the
other in the mesh

On Sun, Nov 16, 2008 at 11:26 PM, Marek Lindner <lindner_marek@yahoo.de>wrote:

> On Monday 17 November 2008 00:06:37 Outback Dingo wrote:
> > any good docs on configuring batman-adv for atheros ?
>
> We are writing it but it takes time. :-)
>
>
> Here the short intro:
>
> Batman advanced is not aware of the Atheros driver. On every hardware it
> runs
> in the same way.
>
> Load the module -> modprobe batman-adv-core
>
> In /proc/net/batman-adv/ you will find the files to tweak batman. E.g. give
> it a
> device to operate on -> echo eth0 > /proc/net/batman-adv/interface
>
> deactivate batman-adv -> echo "" > /proc/net/batman-adv/interface
>
> The other files in that folder should be self explanatory. If not come back
> and
> ask us.
>
> Regards,
> Marek
>
> _______________________________________________
> B.A.T.M.A.N mailing list
> B.A.T.M.A.N@open-mesh.net
> https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
>

[-- Attachment #2: Type: text/html, Size: 1846 bytes --]