public inbox for b.a.t.m.a.n@lists.open-mesh.org
 help / color / mirror / Atom feed
From: Axel Neumann <axel@open-mesh.net>
To: The list for a Better Approach To Mobile Ad-hoc Networking
	<b.a.t.m.a.n@open-mesh.net>
Subject: Re: [B.A.T.M.A.N.] batman-exp rev.1154 still using 94% CPU load
Date: Tue, 2 Dec 2008 13:06:19 +0100	[thread overview]
Message-ID: <200812021306.20569.axel@open-mesh.net> (raw)
In-Reply-To: <83b3410f8105237b1e68c92065dec7d0.squirrel@wm.ddmesh.de>

Hi,


On Dienstag 02 Dezember 2008, Stephan Enderlein (Freifunk Dresden) wrote:
> Hi,
>
> I have still the problem that batman-exp is hanging on 94% cpu load.
> perhaps it has nothing to do with the gateway task. It is possible that
> I run more "batmand -c" at same time?
yes, should be possible. I am often connecting different debug clients, also 
while changing for example the preferred gateway or the gateway-class.

Do you feel this problem has arised with a specific revision (has it been 
there with rv1069 and before) or has it always been there and your setup has 
changed?

> The current batman revision is  1154.
> Do you have any idea?
Actually not. Unfortunately I'll be probably be offline during the next week 
and cant do much. There is a completely thread-free version waiting to be 
checked in, then we can see if this helps, But actually I would prefer to 
nail down the source of the problem...

cu,
axel

>
>
> Mem: 15700K used, 14924K free, 0K shrd, 1440K buff, 6600K cached
> CPU:  5.8% usr 94.1% sys  0.0% nice  0.0% idle  0.0% io  0.0% irq  0.0%
> softirq Load average: 1.62 1.39 0.98
>   PID  PPID USER     STAT   VSZ %MEM %CPU COMMAND
> 24256  1843 root     R     1264  4.1 94.7 /sbin/batmand -s 10.12.0.1 -a
> 10.12.10.16/28 -r 1 --t 63 --no-unreachable-rule --no-throw-rules
> --no-prio-rules --one-way-tunnel 1 --two-way-tunnel 0 eth1 tbb /t 1 /i /A
>  1156     1 root     S     1264  4.1  0.0 /sbin/batmand -s 10.12.0.1 -a
> 10.12.10.16/28 -r 1 --t 63 --no-unreachable-rule --no-throw-rules
> --no-prio-rules --one-way-tunnel 1 --two-way-tunnel 0 eth1 tbb /t 1 /i /A
>  1843  1156 root     S     1264  4.1  0.0 /sbin/batmand -s 10.12.0.1 -a
> 10.12.10.16/28 -r 1 --t 63 --no-unreachable-rule --no-throw-rules
> --no-prio-rules --one-way-tunnel 1 --two-way-tunnel 0 eth1 tbb /t 1 /i /A
> 24462 24460 root     S     1216  3.9  0.0 batmand -cb -d2
> 24857 24815 root     S     1216  3.9  0.0 batmand -c -b -r 1
>
> ---------------------------------------
> Dipl.Informatiker(FH) Stephan Enderlein
> Freifunk Dresden
>
>
> _______________________________________________
> B.A.T.M.A.N mailing list
> B.A.T.M.A.N@open-mesh.net
> https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n



  reply	other threads:[~2008-12-02 12:06 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-02 11:30 [B.A.T.M.A.N.] batman-exp rev.1154 still using 94% CPU load Stephan Enderlein (Freifunk Dresden)
2008-12-02 12:06 ` Axel Neumann [this message]
2008-12-02 13:59   ` Stephan Enderlein (Freifunk Dresden)
2008-12-09  9:28   ` Stephan Enderlein (Freifunk Dresden)
2008-12-09 10:22     ` Stephan Enderlein (Freifunk Dresden)
2008-12-11 10:54     ` [B.A.T.M.A.N.] dublicate HNAs Axel Neumann
2008-12-11 14:01       ` Freifunk
2008-12-12 10:46         ` Axel Neumann
2008-12-12 23:51           ` Stephan Enderlein (Freifunk Dresden)
2008-12-17 20:14             ` Axel Neumann
2008-12-18 11:11               ` [B.A.T.M.A.N.] dublicate HNAs / batmand / certificates Stephan Enderlein (Freifunk Dresden)
2008-12-19 10:15                 ` [B.A.T.M.A.N.] dublicate HNAs " Axel Neumann
2008-12-19 11:06                   ` Stephan Enderlein (Freifunk Dresden)
2008-12-19 11:19                   ` Stephan Enderlein (Freifunk Dresden)
2008-12-24 18:24                   ` [B.A.T.M.A.N.] Testing Batman Resul Cetin
2009-01-06 13:57                   ` [B.A.T.M.A.N.] dublicate HNAs / certificates Alexander Morlang
2009-01-15 14:24                     ` Axel Neumann
2008-12-17 12:19           ` [B.A.T.M.A.N.] Can't build a mesh network Resul Cetin
2008-12-17 13:57             ` Resul Cetin
2008-12-17 17:46               ` elektra
2008-12-18  6:32               ` Marek Lindner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200812021306.20569.axel@open-mesh.net \
    --to=axel@open-mesh.net \
    --cc=b.a.t.m.a.n@open-mesh.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox