Re: [B.A.T.M.A.N.] Some questions to BATMAN

Re: [B.A.T.M.A.N.] Some questions to BATMAN

[John Harris]

Hiii Don,

thank you very much for your reply, for your help...


>
>> 1)
>> I will build a mesh network.. One of my router is connected to my server
>> with the IP 129.211.186.12. I can't make
>> a traceroute through my router to this server. If I try to make
>> "traceroute 129.211.186.12" from an another router I get the message:
>> "PING 129.211.186.12 (129.211.186.12): 56 data bytes
>> ping: sendto: Network is unreachable
> 
> 
> router 				Server (129.211.186.12)
> (batman eth0) <------------------> (batman some wireless device)
> 
> On the router, which firmware are you running with Batman?
> 
> 
> When you type batmand -c -d 1 on the router /server what do you see?
> 
> What does batmand -v show on the router / server?
> 
> 

I have some problems with my server at the moment, I will write the output of the other commands as soon as possible...


my freifunk firmware is v1.6.29 and the batmand version is :B.A.T.M.A.N. 0.2 rv502 (compability version 3)
 




>> I can send ping requests from my server to the router and from the
>> router to the server, but as I said, I can't make a traceroute to the
>> server
>> from an another router. My question is, how can I do this ?
>>
>> In OLSR it was not a problem to trace the server through the router.
>> Should I change something in HNA messages ?
>>
>> 2)
>> I read the HowTO from Freifunk Leipzig about the configuration of
>> BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the
>> configuration
>> If I want to run BATMAN in Ubuntu Intrepid? How can I configure the
>> IPTABLES ?
>>
> 
> For newer batman and experimental you'll want to open up ports 4305-4307:
> 
> iptables -t filter -I INPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
> iptables -t filter -I INPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
> iptables -t filter -I INPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT
> iptables -t filter -I OUTPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
> iptables -t filter -I OUTPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
> iptables -t filter -I OUTPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT


You helped me a lot so far,thank you, 
I will write the output of the commands as soon as possible... 


greetings,
John


> 
> 
> 
> 
> _______________________________________________
> B.A.T.M.A.N mailing list
> B.A.T.M.A.N@open-mesh.net
> https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
> 

_______________________________________________________________________
Sensationsangebot verlängert: WEB.DE FreeDSL - Telefonanschluss + DSL
für nur 16,37 Euro/mtl.!* http://dsl.web.de/?ac=OM.AD.AD008K15039B7069a

Re: [B.A.T.M.A.N.] Some questions to BATMAN

[Marek Lindner]

Hi,

> my freifunk firmware is v1.6.29 and the batmand version is :B.A.T.M.A.N.
> 0.2 rv502 (compability version 3)

please consider upgrading to the latest code. 0.2 is outdated (released May 
2007). Version 0.3 is the current stable whereas the 0.3.1 release will happen 
in the coming days.


> >> I read the HowTO from Freifunk Leipzig about the configuration of
> >> BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the
> >> configuration
> >> If I want to run BATMAN in Ubuntu Intrepid? How can I configure the
> >> IPTABLES ?

Unless you run your own firewall settings I could imagine you wont need to 
configure iptables. The routers need these settings because they use iptables 
heavily (unlike a normal desktop).


Marek

Re: [B.A.T.M.A.N.] Some questions to BATMAN

[John Harris]

Hii,

I have fixed my problem... The reason was the HNA announce...After writing 129.211.186.0If/24 in the HNA field, I could make a 
traceroute to my server...

Thank you all for the advices...
If anybody has some advices, comments or want to discuss, don't hesistate to contact me...

greetings,
J





> -----Ursprüngliche Nachricht-----
> Von: "John Harris" <JHarris@web.de>
> Gesendet: 31.12.08 13:24:46
> An:  dondavis@reglue.org
> Betreff: Re: [B.A.T.M.A.N.] Some questions to BATMAN


> Hii Don,
> 
> my scenario look like as follows...
> 
> router 1   <--------------------->  router 2 <-----------------------> router 3 (connected to server..IP 129.211.186.46)
> eth1:bat                                   eth1:bat                                 eth1:bat  (11.1.1.2) (wired: 129.211.186.12)
> 
> The IP Adress of my router 3 is 129.211.186.12 (dhcp-lan), router 3 is connected to my server with the server IP 129.211.186.46.
> 
> I can ping the eth1:bat interface of the router among each other. But I couldn't make a trace to the server IP 129.211.186.46 from 
> an another router... I get the message:
> 
> " *sendto: Network is unreachable
> traceroute: wrote 129.211.186.46 40 chars, ret=-1" 
> 
> My settings to BATMAN are:
> 
> ----------------------------------------
> Management: B.A.T.M.A.N.
> 
> 
> WLAN as 			                            11.1.1.3/24
> LAN as 			                            129.211.186.12
>  			
> local internet-bandwidth:                    This is not a internet-gateway	
> common used gateway 	                    stable
> Prefered gateway: 	         
> Host&Network Announcement (HNA): 129.211.186.46/24	
> Visualisation Server: 	                    
> Hello-Interval [ms]: 	
> ----------------------------------------
>    
>  The output of the command "batmand -c -d 1" on the router I see:
>  Originator           Router (#/128):    Potential routers... [B.A.T.M.A.N. 0.2 rv502, MainIF/IP: eth1:bat 11.1.1.1, UT: 0d 1h22m]
> 11.1.1.3               11.1.1.3 (119):        11.1.1.3 (119)
> 129.211.186.181        11.1.1.3 (128):        11.1.1.3 (128)
> 
>  Originator           Router (#/128):    Potential routers... [B.A.T.M.A.N. 0.2 rv502, MainIF/IP: eth1:bat 11.1.1.3, UT: 0d 0h27m]
> 11.1.1.1               11.1.1.1 (124):        11.1.1.1 (124)
> 
> 
> I would be very appreciate, if you an the others could give me some advice how to fix my problem...How can make a
> traceroute form a router to the server IP 129.211.186.46.
> 
> Thanks in advance...
> 
> greetings,
> J
> 
> 
> 
> > -----Ursprüngliche Nachricht-----
> > Von: "John Harris" <JHarris@web.de>
> > Gesendet: 29.12.08 21:39:27
> > An: b.a.t.m.a.n@open-mesh.net,dondavis@reglue.org
> > Betreff: Re: [B.A.T.M.A.N.] Some questions to BATMAN
> 
> > Hiii Don,
> > 
> > thank you very much for your reply, for your help...
> > 
> > 
> > >
> > >> 1)
> > >> I will build a mesh network.. One of my router is connected to my server
> > >> with the IP 129.211.186.12. I can't make
> > >> a traceroute through my router to this server. If I try to make
> > >> "traceroute 129.211.186.12" from an another router I get the message:
> > >> "PING 129.211.186.12 (129.211.186.12): 56 data bytes
> > >> ping: sendto: Network is unreachable
> > > 
> > > 
> > > router 				Server (129.211.186.12)
> > > (batman eth0) <------------------> (batman some wireless device)
> > > 
> > > On the router, which firmware are you running with Batman?
> > > 
> > > 
> > > When you type batmand -c -d 1 on the router /server what do you see?
> > > 
> > > What does batmand -v show on the router / server?
> > > 
> > > 
> > 
> > I have some problems with my server at the moment, I will write the output of the other commands as soon as possible...
> > 
> > 
> > my freifunk firmware is v1.6.29 and the batmand version is :B.A.T.M.A.N. 0.2 rv502 (compability version 3)
> >  
> > 
> > 
> > 
> > 
> > >> I can send ping requests from my server to the router and from the
> > >> router to the server, but as I said, I can't make a traceroute to the
> > >> server
> > >> from an another router. My question is, how can I do this ?
> > >>
> > >> In OLSR it was not a problem to trace the server through the router.
> > >> Should I change something in HNA messages ?
> > >>
> > >> 2)
> > >> I read the HowTO from Freifunk Leipzig about the configuration of
> > >> BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the
> > >> configuration
> > >> If I want to run BATMAN in Ubuntu Intrepid? How can I configure the
> > >> IPTABLES ?
> > >>
> > > 
> > > For newer batman and experimental you'll want to open up ports 4305-4307:
> > > 
> > > iptables -t filter -I INPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
> > > iptables -t filter -I INPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
> > > iptables -t filter -I INPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT
> > > iptables -t filter -I OUTPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
> > > iptables -t filter -I OUTPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
> > > iptables -t filter -I OUTPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT
> > 
> > 
> > You helped me a lot so far,thank you, 
> > I will write the output of the commands as soon as possible... 
> > 
> > 
> > greetings,
> > John
> > 
> > 
> > > 
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > B.A.T.M.A.N mailing list
> > > B.A.T.M.A.N@open-mesh.net
> > > https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
> > > 
> > 
> 
> 
> _______________________________________________________________________
> Täglich 1.000.000 Euro gewinnen! Jetzt kostenlos WEB.DE MillionenKlick 
> spielen! https://millionenklick.web.de/?mc=mail@footer.mklick@home
> 
> 
> _______________________________________________
> B.A.T.M.A.N mailing list
> B.A.T.M.A.N@open-mesh.net
> https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
> 


_______________________________________________________________________
Sensationsangebot verlängert: WEB.DE FreeDSL - Telefonanschluss + DSL
für nur 16,37 Euro/mtl.!* http://dsl.web.de/?ac=OM.AD.AD008K15039B7069a

Re: [B.A.T.M.A.N.] Some questions to BATMAN

[John Harris]

Hii Don,

my scenario look like as follows...

router 1   <--------------------->  router 2 <-----------------------> router 3 (connected to server..IP 129.211.186.46)
eth1:bat                                   eth1:bat                                 eth1:bat  (11.1.1.2) (wired: 129.211.186.12)

The IP Adress of my router 3 is 129.211.186.12 (dhcp-lan), router 3 is connected to my server with the server IP 129.211.186.46.

I can ping the eth1:bat interface of the router among each other. But I couldn't make a trace to the server IP 129.211.186.46 from 
an another router... I get the message:

" *sendto: Network is unreachable
traceroute: wrote 129.211.186.46 40 chars, ret=-1" 

My settings to BATMAN are:

----------------------------------------
Management: B.A.T.M.A.N.


WLAN as 			                            11.1.1.3/24
LAN as 			                            129.211.186.12
 			
local internet-bandwidth:                    This is not a internet-gateway	
common used gateway 	                    stable
Prefered gateway: 	         
Host&Network Announcement (HNA): 129.211.186.46/24	
Visualisation Server: 	                    
Hello-Interval [ms]: 	
----------------------------------------
   
 The output of the command "batmand -c -d 1" on the router I see:
 Originator           Router (#/128):    Potential routers... [B.A.T.M.A.N. 0.2 rv502, MainIF/IP: eth1:bat 11.1.1.1, UT: 0d 1h22m]
11.1.1.3               11.1.1.3 (119):        11.1.1.3 (119)
129.211.186.181        11.1.1.3 (128):        11.1.1.3 (128)

 Originator           Router (#/128):    Potential routers... [B.A.T.M.A.N. 0.2 rv502, MainIF/IP: eth1:bat 11.1.1.3, UT: 0d 0h27m]
11.1.1.1               11.1.1.1 (124):        11.1.1.1 (124)


I would be very appreciate, if you an the others could give me some advice how to fix my problem...How can make a
traceroute form a router to the server IP 129.211.186.46.

Thanks in advance...

greetings,
J



> -----Ursprüngliche Nachricht-----
> Von: "John Harris" <JHarris@web.de>
> Gesendet: 29.12.08 21:39:27
> An: b.a.t.m.a.n@open-mesh.net,dondavis@reglue.org
> Betreff: Re: [B.A.T.M.A.N.] Some questions to BATMAN

> Hiii Don,
> 
> thank you very much for your reply, for your help...
> 
> 
> >
> >> 1)
> >> I will build a mesh network.. One of my router is connected to my server
> >> with the IP 129.211.186.12. I can't make
> >> a traceroute through my router to this server. If I try to make
> >> "traceroute 129.211.186.12" from an another router I get the message:
> >> "PING 129.211.186.12 (129.211.186.12): 56 data bytes
> >> ping: sendto: Network is unreachable
> > 
> > 
> > router 				Server (129.211.186.12)
> > (batman eth0) <------------------> (batman some wireless device)
> > 
> > On the router, which firmware are you running with Batman?
> > 
> > 
> > When you type batmand -c -d 1 on the router /server what do you see?
> > 
> > What does batmand -v show on the router / server?
> > 
> > 
> 
> I have some problems with my server at the moment, I will write the output of the other commands as soon as possible...
> 
> 
> my freifunk firmware is v1.6.29 and the batmand version is :B.A.T.M.A.N. 0.2 rv502 (compability version 3)
>  
> 
> 
> 
> 
> >> I can send ping requests from my server to the router and from the
> >> router to the server, but as I said, I can't make a traceroute to the
> >> server
> >> from an another router. My question is, how can I do this ?
> >>
> >> In OLSR it was not a problem to trace the server through the router.
> >> Should I change something in HNA messages ?
> >>
> >> 2)
> >> I read the HowTO from Freifunk Leipzig about the configuration of
> >> BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the
> >> configuration
> >> If I want to run BATMAN in Ubuntu Intrepid? How can I configure the
> >> IPTABLES ?
> >>
> > 
> > For newer batman and experimental you'll want to open up ports 4305-4307:
> > 
> > iptables -t filter -I INPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
> > iptables -t filter -I INPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
> > iptables -t filter -I INPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT
> > iptables -t filter -I OUTPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
> > iptables -t filter -I OUTPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
> > iptables -t filter -I OUTPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT
> 
> 
> You helped me a lot so far,thank you, 
> I will write the output of the commands as soon as possible... 
> 
> 
> greetings,
> John
> 
> 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > B.A.T.M.A.N mailing list
> > B.A.T.M.A.N@open-mesh.net
> > https://list.open-mesh.net/mm/listinfo/b.a.t.m.a.n
> > 
> 


_______________________________________________________________________
Täglich 1.000.000 Euro gewinnen! Jetzt kostenlos WEB.DE MillionenKlick 
spielen! https://millionenklick.web.de/?mc=mail@footer.mklick@home

[B.A.T.M.A.N.] Some questions to BATMAN

[John Harris]

Hiii,

I wrote some questions a few day ago ? Could nobody help me regarding this questions ???
Sorry people, the questions are maybe very simple, but as I said I'm a beginner. 

_______________________________________________________________________
Sensationsangebot verlängert: WEB.DE FreeDSL - Telefonanschluss + DSL
für nur 16,37 Euro/mtl.!* http://dsl.web.de/?ac=OM.AD.AD008K15039B7069a

[B.A.T.M.A.N.] Some questions to BATMAN

[John Harris]

Hiii,

I have some question about BATMAN routing protocol...
I would be appreciate if anybody could help me...


1)
I will build a mesh network.. One of my router is connected to my server with the IP 129.211.186.12. I can't make 
a traceroute through my router to this server. If I try to make "traceroute 129.211.186.12" from an another router I get the message:
"PING 129.211.186.12 (129.211.186.12): 56 data bytes
ping: sendto: Network is unreachable
"   
I can send ping requests from my server to the router and from the router to the server, but as I said, I can't make a traceroute to the server
from an another router. My question is, how can I do this ? 

In OLSR it was not a problem to trace the server through the router. Should I change something in HNA messages ? 

2)
I read the HowTO from Freifunk Leipzig about the configuration of BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the configuration
If I want to run BATMAN in Ubuntu Intrepid? How can I configure the IPTABLES ?

greetings,
John
_______________________________________________________________________
Sensationsangebot verlängert: WEB.DE FreeDSL - Telefonanschluss + DSL
für nur 16,37 Euro/mtl.!* http://dsl.web.de/?ac=OM.AD.AD008K15039B7069a

Re: [B.A.T.M.A.N.] Some questions to BATMAN

[Don Davis]

> 1)
> I will build a mesh network.. One of my router is connected to my server with the IP 129.211.186.12. I can't make 
> a traceroute through my router to this server. If I try to make "traceroute 129.211.186.12" from an another router I get the message:
> "PING 129.211.186.12 (129.211.186.12): 56 data bytes
> ping: sendto: Network is unreachable


router 				Server (129.211.186.12)
(batman eth0) <------------------> (batman some wireless device)

On the router, which firmware are you running with Batman?


When you type batmand -c -d 1 on the router /server what do you see?

What does batmand -v show on the router / server?


> I can send ping requests from my server to the router and from the router to the server, but as I said, I can't make a traceroute to the server
> from an another router. My question is, how can I do this ? 
> 
> In OLSR it was not a problem to trace the server through the router. Should I change something in HNA messages ? 
> 
> 2)
> I read the HowTO from Freifunk Leipzig about the configuration of BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the configuration
> If I want to run BATMAN in Ubuntu Intrepid? How can I configure the IPTABLES ?
> 

For newer batman and experimental you'll want to open up ports 4305-4307:

iptables -t filter -I INPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
iptables -t filter -I INPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
iptables -t filter -I INPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT
iptables -t filter -I OUTPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT
iptables -t filter -I OUTPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT
iptables -t filter -I OUTPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT