From: Andrew Lunn <andrew@lunn.ch>
To: The list for a Better Approach To Mobile Ad-hoc Networking
<b.a.t.m.a.n@lists.open-mesh.org>
Subject: Re: [B.A.T.M.A.N.] batman-adv on different archs
Date: Mon, 18 Jan 2010 12:39:54 +0100 [thread overview]
Message-ID: <20100118113954.GC7844@lunn.ch> (raw)
In-Reply-To: <20100118112706.91160@gmx.net>
> The problem comes when I try to add my little ARM based linux box
> onto the group. Again same sources used (latest stable from the
> wiki), crosscompiles fine and I can load the module as normal on the
> box. Setup goes as it should on both the device and the laptop, and
> both systems seems to be running smoothly. But my laptop can only
> see the other laptop, and the device doesn't see anyone. The
> wireless net is working and I can ping each device directly if I
> assign IP's to the 'real' interfaces, but through bat0 nothing is
> found. Any idea what is going wrong?
What do you see in /proc/net/batman-adv/originiators on the three
devices?
Is the ARM device running in big endian or little endian mode?
Any kernel messages?
You may want to rebuild the modules with debugging enabled, see the
README and then enable it as described in the README.
Andrew
next prev parent reply other threads:[~2010-01-18 11:39 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-18 11:27 [B.A.T.M.A.N.] batman-adv on different archs "Juha Ylönen"
2010-01-18 11:39 ` Andrew Lunn [this message]
2010-01-18 13:29 ` "Juha Ylönen"
2010-01-18 13:38 ` Marek Lindner
2010-01-18 13:51 ` Andrew Lunn
2010-01-19 7:46 ` "Juha Ylönen"
2010-01-19 7:43 ` "Juha Ylönen"
2010-01-19 12:07 ` Marek Lindner
2010-01-19 14:51 ` "Juha Ylönen"
2010-01-19 15:11 ` Sven Eckelmann
[not found] ` <20100119153233.319500@gmx.net>
2010-01-19 17:12 ` Sven Eckelmann
2010-01-19 19:37 ` Simon Wunderlich
2010-01-20 14:05 ` "Juha Ylönen"
2010-01-20 21:58 ` Marek Lindner
2010-01-18 11:42 ` Marek Lindner
-- strict thread matches above, loose matches on Subject: below --
2010-01-19 14:58 "Juha Ylönen"
2010-01-20 2:15 ` Marek Lindner
2010-01-20 9:29 ` "Juha Ylönen"
2010-01-20 9:42 ` Marek Lindner
2010-01-20 9:49 ` Andrew Lunn
2010-01-20 9:51 ` Sven Eckelmann
2010-01-20 13:12 ` "Juha Ylönen"
2010-01-20 22:32 ` Marek Lindner
2010-01-21 14:12 ` "Juha Ylönen"
2010-01-21 15:29 ` Sven Eckelmann
2010-01-21 17:17 ` Gus Wirth
2010-01-21 18:32 ` Sven Eckelmann
2010-01-22 18:26 ` Simon Wunderlich
2010-01-24 21:19 ` "Juha Ylönen"
2010-01-21 19:02 "Juha Ylönen"
2010-01-22 12:16 ` Sven Eckelmann
2010-01-24 21:17 "Juha Ylönen"
2010-01-24 22:03 ` Sven Eckelmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100118113954.GC7844@lunn.ch \
--to=andrew@lunn.ch \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox