Re: [B.A.T.M.A.N.] batman-adv on different archs

[Marek Lindner <lindner_marek@yahoo.de>]

On Tuesday 19 January 2010 15:43:34 Juha Ylönen wrote:
> Ah yes, the instructions were actually were in the repository version of
>  the README file, but not in my version of the sources. The sources I have
>  the README is dated 07-11-2009, should I try later version?

Well, the README that is part of the source package matches the sources you 
have. The trunk README might have changed since the last release ...


> The log on the laptop side is pretty sparse:
> [23707.971949] batman-adv: B.A.T.M.A.N. advanced 0.2 (compatibility version
>  8) loaded [23727.025361] batman-adv: Adding interface: wlan0
> [23727.028964] batman-adv: Interface activated: wlan0
> [23727.028983] batman-adv: Creating new local hna entry: de:ba:6c:f3:8d:53
> [23728.028287] batman-adv: Sending own packet (originator
>  00:22:fa:dc:9a:ce, seqno 1, TQ 255, TTL 50, IDF off) on interface wlan0
>  [00:22:fa:dc:9a:ce] [23729.008099] batman-adv: Sending own packet
>  (originator 00:22:fa:dc:9a:ce, seqno 2, TQ 255, TTL 50, IDF off) on
>  interface wlan0 [00:22:fa:dc:9a:ce] [23729.988106] 
>
> i.e. no sign of any other packages than own. On the device side the log is
>  in the same format as the one I sent yesterday. I'll try with the latest
>  version from the repository next.

It confirmed what we saw in the other logs: This device (the laptop?) does not 
see the packets from the other side, therefore the protocol correctly assumes  
a dead link. There might be 2 reasons: either the wifi layer does not really 
work or batman-adv drops the packets without any further warning. 
You can try the latest trunk and/or run batctl/wireshark on the laptop to 
deep-inspect the packets. Feel free to share the logs with us.

Regards,
Marek