From: "\"Juha Ylönen\"" <ylonen@gmx.net>
To: The list for a Better Approach To Mobile Ad-hoc Networking
<b.a.t.m.a.n@lists.open-mesh.org>
Subject: Re: [B.A.T.M.A.N.] batman-adv on different archs
Date: Wed, 20 Jan 2010 14:12:34 +0100 [thread overview]
Message-ID: <20100120131234.4760@gmx.net> (raw)
In-Reply-To: <201001201015.59477.lindner_marek@yahoo.de>
-------- Original-Nachricht --------
> Datum: Wed, 20 Jan 2010 10:15:59 +0800
> Von: Marek Lindner <lindner_marek@yahoo.de>
>
> Before we dive into debugging the code I'd suggest you send us your
> complete
> interface configuration. Maybe the problem is much more simple than it
> seems.
> Complete configuration means: brctl show, ifconfig, cat /proc/net/batman-
> adv/interfaces (or batctl if) and ping output.
Here we go:
---
##x> brctl show
bridge name bridge id STP enabled interfaces
##> cat interfaces
[ active] eth1 00:11:f6:83:af:ab
##> ifconfig
bat0 Link encap:Ethernet HWaddr 32:21:CA:8E:37:DC
inet addr:10.0.1.39 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1476 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:468 (468.0 B)
eth1 Link encap:Ethernet HWaddr 00:11:F6:83:AF:AB
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:179 errors:0 dropped:0 overruns:0 frame:0
TX packets:268 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6086 (5.9 KiB) TX bytes:10450 (10.2 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
##> route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 * 255.0.0.0 U 0 0 0 bat0
##> ping 10.0.1.40
PING 10.0.1.40 (10.0.1.40): 56 data bytes
--- 10.0.1.40 ping statistics ---
10 packets transmitted, 0 packets received, 100% packet loss
---
I also checked the return value for dev_queue_xmit in send.c and it was 0.
-Juha
-Juha
--
Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 -
sicherer, schneller und einfacher! http://portal.gmx.net/de/go/chbrowser
next prev parent reply other threads:[~2010-01-20 13:12 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-19 14:58 [B.A.T.M.A.N.] batman-adv on different archs "Juha Ylönen"
2010-01-20 2:15 ` Marek Lindner
2010-01-20 9:29 ` "Juha Ylönen"
2010-01-20 9:42 ` Marek Lindner
2010-01-20 9:49 ` Andrew Lunn
2010-01-20 9:51 ` Sven Eckelmann
2010-01-20 13:12 ` "Juha Ylönen" [this message]
2010-01-20 22:32 ` Marek Lindner
2010-01-21 14:12 ` "Juha Ylönen"
2010-01-21 15:29 ` Sven Eckelmann
2010-01-21 17:17 ` Gus Wirth
2010-01-21 18:32 ` Sven Eckelmann
2010-01-22 18:26 ` Simon Wunderlich
2010-01-24 21:19 ` "Juha Ylönen"
-- strict thread matches above, loose matches on Subject: below --
2010-01-24 21:17 "Juha Ylönen"
2010-01-24 22:03 ` Sven Eckelmann
2010-01-21 19:02 "Juha Ylönen"
2010-01-22 12:16 ` Sven Eckelmann
2010-01-18 11:27 "Juha Ylönen"
2010-01-18 11:39 ` Andrew Lunn
2010-01-18 13:29 ` "Juha Ylönen"
2010-01-18 13:38 ` Marek Lindner
2010-01-18 13:51 ` Andrew Lunn
2010-01-19 7:46 ` "Juha Ylönen"
2010-01-19 7:43 ` "Juha Ylönen"
2010-01-19 12:07 ` Marek Lindner
2010-01-19 14:51 ` "Juha Ylönen"
2010-01-19 15:11 ` Sven Eckelmann
[not found] ` <20100119153233.319500@gmx.net>
2010-01-19 17:12 ` Sven Eckelmann
2010-01-19 19:37 ` Simon Wunderlich
2010-01-20 14:05 ` "Juha Ylönen"
2010-01-20 21:58 ` Marek Lindner
2010-01-18 11:42 ` Marek Lindner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100120131234.4760@gmx.net \
--to=ylonen@gmx.net \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox