Re: [B.A.T.M.A.N.] [PATCH 6/8] Staging: batman-adv: Add bonding functionality

[Marek Lindner <lindner_marek@yahoo.de>]

[-- Attachment #1: Type: Text/Plain, Size: 373 bytes --]

On Monday 21 June 2010 11:04:53 Sven Eckelmann wrote:
> I noticed that the bonding file in sysfs is not documented while working on
> batctl yesterday. Can you please provide a short text for
>  http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=dri
> vers/staging/batman-adv/sysfs-class-net-mesh

I attached the new file. Will that do ?

Cheers,
Marek

[-- Attachment #2: sysfs-class-net-mesh --]
[-- Type: text/plain, Size: 1561 bytes --]


What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
Date:           May 2010
Contact:        Marek Lindner <lindner_marek@yahoo.de>
Description:
                Indicates whether the batman protocol messages of the
                mesh <mesh_iface> shall be aggregated or not.

What:           /sys/class/net/<mesh_iface>/mesh/bonding
Date:           June 2010
Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Description:
                Indicates whether the data traffic going through the
                mesh will be sent using multiple interfaces at the
                same time (if available).

What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
Date:           May 2010
Contact:        Marek Lindner <lindner_marek@yahoo.de>
Description:
                Defines the interval in milliseconds in which batman
                sends its protocol messages.

What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
Date:           May 2010
Contact:        Marek Lindner <lindner_marek@yahoo.de>
Description:
                Each batman node only maintains information about its
                own local neighborhood, therefore generating graphs
                showing the topology of the entire mesh is not easily
                feasible without having a central instance to collect
                the local topologies from all nodes. This file allows
                to activate the collecting (server) mode. Once
                activated the topology can be retrieved by reading
                the vis_data file.