public inbox for b.a.t.m.a.n@lists.open-mesh.org
 help / color / mirror / Atom feed
From: "Linus Lüssing" <linus.luessing@web.de>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] [PATCH 2/5] batman-adv: Introduce generic BAT_ATTR_* macros
Date: Sun, 10 Oct 2010 06:39:31 +0200	[thread overview]
Message-ID: <20101010043931.GA32458@Sellars> (raw)
In-Reply-To: <1286685001-15227-2-git-send-email-linus.luessing@web.de>

Especially for this commit, I'm not quite sure, if the usage of
the macros is ok and appropritate or just a too extensive use / abuse
of them. So comments highly appreciated :).

Cheers, Linus

On Sun, Oct 10, 2010 at 06:29:58AM +0200, Linus Lüssing wrote:
> This makes exposing bat_priv's atomic_ts storing boolean or uint values
> a one-liner in the future. It also further reduces the amount of
> duplicate code in bat_sysfs.c.
> 
> Additionally, the sysfs entries "aggregate_ogms" and "fragmentation"
> get renamed to "aggregation" and "frag" for consistency reasons, they
> match the *_enabled parts in bat_priv now.
> 
> Signed-off-by: Linus Lüssing <linus.luessing@web.de>
> ---
>  bat_sysfs.c |  186 ++++++++++++++++++++---------------------------------------
>  1 files changed, 62 insertions(+), 124 deletions(-)
> 
> diff --git a/bat_sysfs.c b/bat_sysfs.c
> index 60e3122..878cb8e 100644
> --- a/bat_sysfs.c
> +++ b/bat_sysfs.c
> @@ -31,6 +31,7 @@
>  
>  #define to_dev(obj)     container_of(obj, struct device, kobj)
>  
> +/* Use this, if you have customized show and store functions */
>  #define BAT_ATTR(_name, _mode, _show, _store)	\
>  struct bat_attribute bat_attr_##_name = {	\
>  	.attr = {.name = __stringify(_name),	\
> @@ -39,6 +40,60 @@ struct bat_attribute bat_attr_##_name = {	\
>  	.store  = _store,			\
>  };
>  
> +/* Use this, if you are going to turn a [name]_enabled in bat_priv on or off */
> +#define BAT_ATTR_SWITCH(_name, _mode, _post_func)			\
> +static ssize_t store_##_name(struct kobject *kobj, struct attribute *attr, \
> +		      char *buff, size_t count)				\
> +{									\
> +	struct device *dev = to_dev(kobj->parent);			\
> +	struct net_device *net_dev = to_net_dev(dev);			\
> +	struct bat_priv *bat_priv = netdev_priv(net_dev);		\
> +	void (*post_func)(struct net_device *) = _post_func;		\
> +	int ret;							\
> +	ret = store_switch_attr(buff, count, net_dev, (char *)attr->name, \
> +				 &bat_priv->_name##_enabled);		\
> +	if (post_func && ret)						\
> +		post_func(net_dev);					\
> +	return ret;							\
> +}									\
> +static ssize_t show_##_name(struct kobject *kobj, struct attribute *attr, \
> +			    char *buff)					\
> +{									\
> +	struct device *dev = to_dev(kobj->parent);			\
> +	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));	\
> +	return sprintf(buff, "%s\n",					\
> +		       atomic_read(&bat_priv->_name##_enabled) == 0 ?	\
> +		       "disabled" : "enabled");				\
> +}									\
> +BAT_ATTR(_name, _mode, show_##_name, store_##_name)
> +
> +/* Use this, if you are going to set [name] in bat_priv to unsigned integer
> + * values only */
> +#define BAT_ATTR_UINT(_name, _mode, _min, _max, _post_func)		\
> +static ssize_t store_##_name(struct kobject *kobj, struct attribute *attr, \
> +		      char *buff, size_t count)				\
> +{									\
> +	struct device *dev = to_dev(kobj->parent);			\
> +	struct net_device *net_dev = to_net_dev(dev);			\
> +	struct bat_priv *bat_priv = netdev_priv(net_dev);		\
> +	void (*post_func)(struct net_device *) = _post_func;		\
> +	int ret;							\
> +	ret = store_uint_attr(buff, count, net_dev, (char *)attr->name,	\
> +			       _min, _max, &bat_priv->_name);		\
> +	if (post_func && ret)						\
> +		post_func(net_dev);					\
> +	return ret;							\
> +}									\
> +static ssize_t show_##_name(struct kobject *kobj, struct attribute *attr, \
> +			    char *buff)					\
> +{									\
> +	struct device *dev = to_dev(kobj->parent);			\
> +	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));	\
> +	return sprintf(buff, "%i\n", atomic_read(&bat_priv->_name));	\
> +}									\
> +BAT_ATTR(_name, _mode, show_##_name, store_##_name)
> +
> +
>  static int store_switch_attr(char *buff, size_t count,
>  			     struct net_device *net_dev,
>  			     char *attr_name, atomic_t *attr)
> @@ -114,77 +169,6 @@ static int store_uint_attr(char *buff, size_t count,
>  }
>  
>  
> -static ssize_t show_aggr_ogms(struct kobject *kobj, struct attribute *attr,
> -			     char *buff)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
> -	int aggr_status = atomic_read(&bat_priv->aggregation_enabled);
> -
> -	return sprintf(buff, "%s\n",
> -		       aggr_status == 0 ? "disabled" : "enabled");
> -}
> -
> -static ssize_t store_aggr_ogms(struct kobject *kobj, struct attribute *attr,
> -			      char *buff, size_t count)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct net_device *net_dev = to_net_dev(dev);
> -	struct bat_priv *bat_priv = netdev_priv(net_dev);
> -
> -	return store_switch_attr(buff, count, net_dev, (char *)attr->name,
> -				 &bat_priv->aggregation_enabled);
> -}
> -
> -static ssize_t show_bond(struct kobject *kobj, struct attribute *attr,
> -			     char *buff)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
> -	int bond_status = atomic_read(&bat_priv->bonding_enabled);
> -
> -	return sprintf(buff, "%s\n",
> -		       bond_status == 0 ? "disabled" : "enabled");
> -}
> -
> -static ssize_t store_bond(struct kobject *kobj, struct attribute *attr,
> -			  char *buff, size_t count)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct net_device *net_dev = to_net_dev(dev);
> -	struct bat_priv *bat_priv = netdev_priv(net_dev);
> -
> -	return store_switch_attr(buff, count, net_dev, (char *)attr->name,
> -				 &bat_priv->bonding_enabled);
> -}
> -
> -static ssize_t show_frag(struct kobject *kobj, struct attribute *attr,
> -			     char *buff)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
> -	int frag_status = atomic_read(&bat_priv->frag_enabled);
> -
> -	return sprintf(buff, "%s\n",
> -		       frag_status == 0 ? "disabled" : "enabled");
> -}
> -
> -static ssize_t store_frag(struct kobject *kobj, struct attribute *attr,
> -			  char *buff, size_t count)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct net_device *net_dev = to_net_dev(dev);
> -	struct bat_priv *bat_priv = netdev_priv(net_dev);
> -	int ret;
> -
> -	ret = store_switch_attr(buff, count, net_dev, (char *)attr->name,
> -				&bat_priv->frag_enabled);
> -	if (ret)
> -		update_min_mtu(net_dev);
> -
> -	return ret;
> -}
> -
>  static ssize_t show_vis_mode(struct kobject *kobj, struct attribute *attr,
>  			     char *buff)
>  {
> @@ -282,66 +266,20 @@ static ssize_t store_gw_mode(struct kobject *kobj, struct attribute *attr,
>  	return gw_mode_set(net_dev, buff, count);
>  }
>  
> -static ssize_t show_orig_interval(struct kobject *kobj, struct attribute *attr,
> -				 char *buff)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
> -
> -	return sprintf(buff, "%i\n",
> -		       atomic_read(&bat_priv->orig_interval));
> -}
> -
> -static ssize_t store_orig_interval(struct kobject *kobj, struct attribute *attr,
> -				  char *buff, size_t count)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct net_device *net_dev = to_net_dev(dev);
> -	struct bat_priv *bat_priv = netdev_priv(net_dev);
> -
> -	return store_uint_attr(buff, count, net_dev, (char *)attr->name,
> -			       2 * JITTER, UINT_MAX, &bat_priv->orig_interval);
> -}
> -
> -#ifdef CONFIG_BATMAN_ADV_DEBUG
> -static ssize_t show_log_level(struct kobject *kobj, struct attribute *attr,
> -			     char *buff)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct bat_priv *bat_priv = netdev_priv(to_net_dev(dev));
> -	int log_level = atomic_read(&bat_priv->log_level);
> -
> -	return sprintf(buff, "%d\n", log_level);
> -}
> -
> -static ssize_t store_log_level(struct kobject *kobj, struct attribute *attr,
> -			      char *buff, size_t count)
> -{
> -	struct device *dev = to_dev(kobj->parent);
> -	struct net_device *net_dev = to_net_dev(dev);
> -	struct bat_priv *bat_priv = netdev_priv(net_dev);
> -
> -	return store_uint_attr(buff, count, net_dev, (char *)attr->name,
> -			       0, 3, &bat_priv->log_level);
> -}
> -#endif
> -
> -static BAT_ATTR(aggregated_ogms, S_IRUGO | S_IWUSR,
> -		show_aggr_ogms, store_aggr_ogms);
> -static BAT_ATTR(bonding, S_IRUGO | S_IWUSR, show_bond, store_bond);
> -static BAT_ATTR(fragmentation, S_IRUGO | S_IWUSR, show_frag, store_frag);
> +BAT_ATTR_SWITCH(aggregation, S_IRUGO | S_IWUSR, NULL);
> +BAT_ATTR_SWITCH(bonding, S_IRUGO | S_IWUSR, NULL);
> +BAT_ATTR_SWITCH(frag, S_IRUGO | S_IWUSR, update_min_mtu);
>  static BAT_ATTR(vis_mode, S_IRUGO | S_IWUSR, show_vis_mode, store_vis_mode);
>  static BAT_ATTR(gw_mode, S_IRUGO | S_IWUSR, show_gw_mode, store_gw_mode);
> -static BAT_ATTR(orig_interval, S_IRUGO | S_IWUSR,
> -		show_orig_interval, store_orig_interval);
> +BAT_ATTR_UINT(orig_interval, S_IRUGO | S_IWUSR, 2 * JITTER, INT_MAX, NULL);
>  #ifdef CONFIG_BATMAN_ADV_DEBUG
> -static BAT_ATTR(log_level, S_IRUGO | S_IWUSR, show_log_level, store_log_level);
> +BAT_ATTR_UINT(log_level, S_IRUGO | S_IWUSR, 0, 3, NULL);
>  #endif
>  
>  static struct bat_attribute *mesh_attrs[] = {
> -	&bat_attr_aggregated_ogms,
> +	&bat_attr_aggregation,
>  	&bat_attr_bonding,
> -	&bat_attr_fragmentation,
> +	&bat_attr_frag,
>  	&bat_attr_vis_mode,
>  	&bat_attr_gw_mode,
>  	&bat_attr_orig_interval,
> -- 
> 1.7.1
> 

  reply	other threads:[~2010-10-10  4:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-10  4:29 [B.A.T.M.A.N.] [PATCH 1/5] batman-adv: Wrapper functions for sysfs storing Linus Lüssing
2010-10-10  4:29 ` [B.A.T.M.A.N.] [PATCH 2/5] batman-adv: Introduce generic BAT_ATTR_* macros Linus Lüssing
2010-10-10  4:39   ` Linus Lüssing [this message]
2010-10-10  8:45     ` Andrew Lunn
2010-10-10 10:34   ` Sven Eckelmann
2010-10-10 12:42   ` Marek Lindner
2010-10-10 19:00     ` Linus Lüssing
2010-10-11  8:04       ` Sven Eckelmann
2010-10-10  4:29 ` [B.A.T.M.A.N.] [PATCH 3/5] batman-adv: Make hop_penalty configurable via sysfs Linus Lüssing
2010-10-10 12:49   ` Marek Lindner
2010-10-10 14:51     ` Linus Lüssing
2010-10-10  4:30 ` [B.A.T.M.A.N.] [PATCH 4/5] batman-adv: Make number of (re)broadcasts " Linus Lüssing
2010-10-10 12:53   ` Marek Lindner
2010-10-10 14:49     ` Linus Lüssing
2010-10-10  4:30 ` [B.A.T.M.A.N.] [PATCH 5/5] batman-adv: Fix resizing of broadcast seqno buffers on if deletion Linus Lüssing
2010-10-12  9:51   ` Marek Lindner
2010-10-10  8:12 ` [B.A.T.M.A.N.] [PATCH 1/5] batman-adv: Wrapper functions for sysfs storing Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101010043931.GA32458@Sellars \
    --to=linus.luessing@web.de \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox