[B.A.T.M.A.N.] mesh

[B.A.T.M.A.N.] mesh

[Jose Armando]

Hello

Can any one tell me how to install batman on openwrt my router has
openwrt install with luci but i cant install batman im need on this
mesh or any one can build for me and i will pay for u time
thank you
Armando  Dieguez
Phone 714.292.0156

Re: [B.A.T.M.A.N.] mesh

[Sven Eckelmann]

[-- Attachment #1: Type: Text/Plain, Size: 523 bytes --]

On Friday 06 May 2011 16:23:43 Jose Armando wrote:
> Hello
> 
> Can any one tell me how to install batman on openwrt my router has
> openwrt install with luci but i cant install batman im need on this
> mesh or any one can build for me and i will pay for u time
> thank you

batmand or batman-adv or bmxd or bmx6?

In case of batman-adv: Have you read
 http://www.open-mesh.org/wiki/batman-adv/Building-with-openwrt and 
http://www.open-mesh.org/wiki/batman-adv/Openwrt-quick-install ?

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [B.A.T.M.A.N.] mesh

[Sven Eckelmann]

[-- Attachment #1: Type: Text/Plain, Size: 600 bytes --]

On Friday 06 May 2011 18:11:21 Jose Armando wrote:
> Hello Sven
> 
> Thank you so much for u info i will play with it
> Note
> Question if for one reason i cant make work can u help to install for
> me i can open telnet on my router and u can do for me i will pay you
> for u time and i will be greatfull to you

No, this will not work because you must create a package on another system and 
ensure that you flash your router with the corresponding openwrt version. You 
can join #batman on irc.freenode.net to ask your questions during the 
installation phase.

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [B.A.T.M.A.N.] mesh

[Sven Eckelmann]

[-- Attachment #1: Type: Text/Plain, Size: 497 bytes --]

On Friday 06 May 2011 19:02:48 Jose Armando wrote:
> Question so openwrt do not work with Batman? U saying I need to creater
> package for my router? Diego to much Question but I'm need I was think just
> install openwrt on the router u can install any package ?

You still didn't answer what you want.... and the gibberish at the end doesn't 
help. You can try to join #batman on irc.freenode.net and maybe we can find 
out what you want and how this can be done.

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [B.A.T.M.A.N.] mesh

[Sven Eckelmann]

[-- Attachment #1: Type: Text/Plain, Size: 1137 bytes --]

On Friday 06 May 2011 19:21:58 Jose Armando wrote:
> Sorry seven here's is what looking for I would like to build a firmware
> that work like mesh and I been told that Batman is the best I'm new one
> this linux open source but I want to learn and I want to build mesh
> firmware that work with this
> 1 open ssid
> 2 close ssid with wpa password
> 3 mesh ssid by MAC addresses so I can mesh 20 routers
> 4 used captival portal
> Used Opendns

So, do you want batman-adv or batmand or bmxd or bmx6? Why is one of the 
previous ones better then... lets say olsr or babeld. Do you want mesh for the 
backbone or for the actual clients? Do you want to use multiple interfaces? 
Why don't you use already existing solutions? What kind of router do you use? 
What do you mean by open ssid? How do you think is a ssid and wpa are related? 
What is a "ssid by MAC addresses"? Do you know what IBSS is? Why is a dns 
provider relevant? Are you able to build OpenWRT? Do you know what an OpenWRT 
feed is? Do you know how to build packages through OpenWRT feeds and integrate 
them in a OpenWRT image?

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [B.A.T.M.A.N.] mesh

[Sven Eckelmann]

[-- Attachment #1: Type: Text/Plain, Size: 1082 bytes --]

On Friday 06 May 2011 19:58:46 Sebastián D. Criado wrote:
> El 06/05/11 14:39, Sven Eckelmann escribió:
> > On Friday 06 May 2011 19:21:58 Jose Armando wrote:
> >> Sorry seven here's is what looking for I would like to build a firmware
> >> that work like mesh and I been told that Batman is the best I'm new one
> >> this linux open source but I want to learn and I want to build mesh
> >> firmware that work with this
> >> 1 open ssid
> >> 2 close ssid with wpa password
> >> 3 mesh ssid by MAC addresses so I can mesh 20 routers
> >> 4 used captival portal
> >> Used Opendns
> 
> Our development has everything he suggests.
> 
> http://nightwing.lugro-mesh.org.ar/en/
> 
> Indeed. He knows this because it has been communicating with us for
> assistance.
> 
> http://lugro.org.ar/pipermail/nightwing/2011-February/000288.html
> 
> I do not understand that says "i want to build" when it should say "im
> using"
> 
> In deed, today he communicated with us to offer a donation of equipment.

Ok, so everything is already solved.

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [B.A.T.M.A.N.] mesh

[Jose Armando]

Sven

now i feel really stupid with all the question did u ask me
i would love to used open-mesh.com Why don't you use already existing solutions?
well there is not mesh firmware that can work on my ubiquity routers
i used this router ubnt.com
can u build for me the firmware ?

On Fri, May 6, 2011 at 10:39 AM, Sven Eckelmann <sven@narfation.org> wrote:
> On Friday 06 May 2011 19:21:58 Jose Armando wrote:
>> Sorry seven here's is what looking for I would like to build a firmware
>> that work like mesh and I been told that Batman is the best I'm new one
>> this linux open source but I want to learn and I want to build mesh
>> firmware that work with this
>> 1 open ssid
>> 2 close ssid with wpa password
>> 3 mesh ssid by MAC addresses so I can mesh 20 routers
>> 4 used captival portal
>> Used Opendns
>
> So, do you want batman-adv or batmand or bmxd or bmx6? Why is one of the
> previous ones better then... lets say olsr or babeld. Do you want mesh for the
> backbone or for the actual clients? Do you want to use multiple interfaces?
> Why don't you use already existing solutions? What kind of router do you use?
> What do you mean by open ssid? How do you think is a ssid and wpa are related?
> What is a "ssid by MAC addresses"? Do you know what IBSS is? Why is a dns
> provider relevant? Are you able to build OpenWRT? Do you know what an OpenWRT
> feed is? Do you know how to build packages through OpenWRT feeds and integrate
> them in a OpenWRT image?
>
> Kind regards,
>        Sven
>



-- 
Armando  Dieguez
Phone 714.292.0156

Re: [B.A.T.M.A.N.] mesh

[Sven Eckelmann]

[-- Attachment #1: Type: Text/Plain, Size: 145 bytes --]

On Friday 06 May 2011 19:31:33 Jose Armando wrote:
> Sven are u in usa?

Not right now and propably not in the near future.

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]