* [B.A.T.M.A.N.] [PATCH] batctl: update readme
@ 2011-05-26 12:32 Marek Lindner
2011-05-26 12:45 ` Sven Eckelmann
0 siblings, 1 reply; 2+ messages in thread
From: Marek Lindner @ 2011-05-26 12:32 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Marek Lindner
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
---
README | 41 ++++++++++++++++++++---------------------
1 files changed, 20 insertions(+), 21 deletions(-)
diff --git a/README b/README
index d11c6d3..442f8b6 100644
--- a/README
+++ b/README
@@ -18,8 +18,8 @@ settings.
How does it work ?
==================
-batctl uses the /dev/batman-adv device provided by the B.A.T.M.A.N. advanced
-kernel module to inject custom icmp packets into the data flow. That's why
+batctl uses the debugfs/batman_adv/bat0/socket device provided by the B.A.T.M.A.N.
+advanced kernel module to inject custom icmp packets into the data flow. That's why
ping and traceroute work almost like their IP based counterparts. Tcpdump was
designed because B.A.T.M.A.N. advanced encapsulates all traffic within batman
packets, so that the normal tcpdump would not recognize the packets.
@@ -30,8 +30,8 @@ The bat-hosts file
This file is simliar to the /etc/hosts file. You can write one MAC address and
one host name per line. batctl will analyze the file to find the matching MAC
-address to your provided host name. Host names are much easier to remember
-than MAC addresses. ;)
+address to your provided host name. Host names are much easier to remember than
+MAC addresses. ;)
batctl ping
@@ -45,6 +45,7 @@ options:
-h print this help
-i interval in seconds
-t timeout in seconds
+ -R record route
Example:
@@ -95,8 +96,9 @@ options:
4 - batman unicast packets
8 - batman broadcast packets
16 - batman vis packets
- 32 - non batman packets
- 33 - batman ogm & non batman packets
+ 32 - batman fragmented packets
+ 64 - non batman packets
+ 65 - batman ogm & non batman packets
Example output for tcpdump:
@@ -241,12 +243,12 @@ batctl interface
display or modify the interface settings
-Usage: batctl interface|if [none|interface]
+Usage: batctl interface|if [add|del iface(s)]
Example:
$ batctl interface
-[ active] eth0 fe:fe:00:00:01:01
+eth0: active
batctl interval
===============
@@ -270,7 +272,6 @@ Usage: batctl log|l
Example:
$ batctl log
-r)
[ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:01:01 via prev OG: fe:fe:00:00:01:01 seqno 670, tq 245, TTL 49, V 8, IDF 1)
[ 400] Drop packet: originator packet from myself (via neighbour)
[ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0 [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:02:01 via prev OG: fe:fe:00:00:02:01 seqno 545, tq 255, TTL 50, V 8, IDF 0)
@@ -285,15 +286,14 @@ batctl loglevel
display or modify the log level
-Usage: batctl |ll [level]
+Usage: batctl loglevel|ll [level]
Example:
$ batctl loglevel
-[x] critical (0)
-[x] warnings (1)
-[x] notices (2)
-[x] batman (4)
-[x] routes (8)
+[x] all debug output disabled (0)
+[ ] messages related to routing / flooding / broadcasting (1)
+[ ] messages related to route or hna added / changed / deleted (2)
+[ ] all debug messages (3)
batctl aggregation
==================
@@ -334,18 +334,17 @@ Globally announced TT entries received via the mesh (translation table):
* 86:4b:b2:d2:00:00 via fe:fe:00:00:07:01
* ca:a1:5b:e5:00:00 via fe:fe:00:00:06:01
-batctl vis_server
+batctl vis_mode
=================
display or modify the status of the VIS server
-Usage: batctl vis_server|vs [enabled|disabled]
+Usage: batctl vis_mode|vm [mode]
Example:
-$ batctl vis_server
-[x] client mode (server disabled)
-[ ] server mode (server enabled)
+$ batctl vis_mode
+client
batctl vis_data
@@ -410,7 +409,7 @@ vis-dot to png
--------------
The vis dot output could then further be converted to an image of the topology
-graph, e.g. with the help of the graphviz-tools. The according commands could
+graph, e.g. with the help of the graphviz-tools. The according commands could
then look like this:
$ batctl vis_data dot > /tmp/graph.dot
--
1.7.2.3
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [B.A.T.M.A.N.] [PATCH] batctl: update readme
2011-05-26 12:32 [B.A.T.M.A.N.] [PATCH] batctl: update readme Marek Lindner
@ 2011-05-26 12:45 ` Sven Eckelmann
0 siblings, 0 replies; 2+ messages in thread
From: Sven Eckelmann @ 2011-05-26 12:45 UTC (permalink / raw)
To: b.a.t.m.a.n; +Cc: Marek Lindner
[-- Attachment #1: Type: Text/Plain, Size: 4548 bytes --]
On Thursday 26 May 2011 14:32:25 Marek Lindner wrote:
> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
> ---
Acked by: Sven Eckelmann <sven@narfation.org>
> README | 41 ++++++++++++++++++++---------------------
> 1 files changed, 20 insertions(+), 21 deletions(-)
>
> diff --git a/README b/README
> index d11c6d3..442f8b6 100644
> --- a/README
> +++ b/README
> @@ -18,8 +18,8 @@ settings.
> How does it work ?
> ==================
>
> -batctl uses the /dev/batman-adv device provided by the B.A.T.M.A.N.
> advanced -kernel module to inject custom icmp packets into the data flow.
> That's why +batctl uses the debugfs/batman_adv/bat0/socket device provided
> by the B.A.T.M.A.N. +advanced kernel module to inject custom icmp packets
> into the data flow. That's why ping and traceroute work almost like their
> IP based counterparts. Tcpdump was designed because B.A.T.M.A.N. advanced
> encapsulates all traffic within batman packets, so that the normal tcpdump
> would not recognize the packets. @@ -30,8 +30,8 @@ The bat-hosts file
>
> This file is simliar to the /etc/hosts file. You can write one MAC address
> and one host name per line. batctl will analyze the file to find the
> matching MAC -address to your provided host name. Host names are much
> easier to remember -than MAC addresses. ;)
> +address to your provided host name. Host names are much easier to remember
> than +MAC addresses. ;)
>
>
> batctl ping
> @@ -45,6 +45,7 @@ options:
> -h print this help
> -i interval in seconds
> -t timeout in seconds
> + -R record route
>
> Example:
>
> @@ -95,8 +96,9 @@ options:
> 4 - batman unicast packets
> 8 - batman broadcast packets
> 16 - batman vis packets
> - 32 - non batman packets
> - 33 - batman ogm & non batman packets
> + 32 - batman fragmented packets
> + 64 - non batman packets
> + 65 - batman ogm & non batman packets
>
> Example output for tcpdump:
>
> @@ -241,12 +243,12 @@ batctl interface
>
> display or modify the interface settings
>
> -Usage: batctl interface|if [none|interface]
> +Usage: batctl interface|if [add|del iface(s)]
>
> Example:
>
> $ batctl interface
> -[ active] eth0 fe:fe:00:00:01:01
> +eth0: active
>
> batctl interval
> ===============
> @@ -270,7 +272,6 @@ Usage: batctl log|l
> Example:
>
> $ batctl log
> -r)
> [ 400] Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0
> [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:01:01 via prev OG:
> fe:fe:00:00:01:01 seqno 670, tq 245, TTL 49, V 8, IDF 1) [ 400] Drop
> packet: originator packet from myself (via neighbour) [ 400]
> Received BATMAN packet via NB: fe:fe:00:00:02:01 IF: eth0
> [fe:fe:00:00:01:01] (from OG: fe:fe:00:00:02:01 via prev OG:
> fe:fe:00:00:02:01 seqno 545, tq 255, TTL 50, V 8, IDF 0) @@ -285,15
> +286,14 @@ batctl loglevel
>
> display or modify the log level
>
> -Usage: batctl |ll [level]
> +Usage: batctl loglevel|ll [level]
>
> Example:
> $ batctl loglevel
> -[x] critical (0)
> -[x] warnings (1)
> -[x] notices (2)
> -[x] batman (4)
> -[x] routes (8)
> +[x] all debug output disabled (0)
> +[ ] messages related to routing / flooding / broadcasting (1)
> +[ ] messages related to route or hna added / changed / deleted (2)
> +[ ] all debug messages (3)
>
> batctl aggregation
> ==================
> @@ -334,18 +334,17 @@ Globally announced TT entries received via the mesh
> (translation table): * 86:4b:b2:d2:00:00 via fe:fe:00:00:07:01
> * ca:a1:5b:e5:00:00 via fe:fe:00:00:06:01
>
> -batctl vis_server
> +batctl vis_mode
> =================
>
> display or modify the status of the VIS server
>
> -Usage: batctl vis_server|vs [enabled|disabled]
> +Usage: batctl vis_mode|vm [mode]
>
> Example:
>
> -$ batctl vis_server
> -[x] client mode (server disabled)
> -[ ] server mode (server enabled)
> +$ batctl vis_mode
> +client
>
>
> batctl vis_data
> @@ -410,7 +409,7 @@ vis-dot to png
> --------------
>
> The vis dot output could then further be converted to an image of the
> topology -graph, e.g. with the help of the graphviz-tools. The according
> commands could +graph, e.g. with the help of the graphviz-tools. The
> according commands could then look like this:
>
> $ batctl vis_data dot > /tmp/graph.dot
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-05-26 12:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-26 12:32 [B.A.T.M.A.N.] [PATCH] batctl: update readme Marek Lindner
2011-05-26 12:45 ` Sven Eckelmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox