From: Marek Lindner <lindner_marek@yahoo.de>
To: The list for a Better Approach To Mobile Ad-hoc Networking
<b.a.t.m.a.n@lists.open-mesh.org>
Subject: Re: [B.A.T.M.A.N.] tangentially driver related question on broadcasts with batman-adv
Date: Thu, 16 Jun 2011 12:40:56 +0200 [thread overview]
Message-ID: <201106161240.57198.lindner_marek@yahoo.de> (raw)
In-Reply-To: <BANLkTi=HCdWDjTQER8uOP48RW-XsZ6ehaQ@mail.gmail.com>
On Thursday, June 16, 2011 12:04:41 AM David Beberman wrote:
> I did up the OGM rate, 100 msec and even 10 msec just to experiment.
> This actually seemed to reduce the next-hop decisions, based on the
> batctl ping results.
Did you disable aggregation while using these short intervals ?
> My next step is to getting into the transmit control flow in the WLAN
> device drivers for each piece of
> hardware and see if I can hard code the transmit data rate for
> broadcast packets. Usually there is
> a control header for each transmit frame sent to the
> hardware/firmware. Finding it, and understanding it
> without documentation is a challenge I've been hoping to avoid.
The linux wireless list (http://linuxwireless.org/en/developers/MailingLists)
might be a more suitable place to discuss this kind of topic.
Regards,
Marek
prev parent reply other threads:[~2011-06-16 10:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-15 22:04 [B.A.T.M.A.N.] tangentially driver related question on broadcasts with batman-adv David Beberman
2011-06-16 9:20 ` Daniele Furlan
2011-06-16 9:20 ` Daniel Seither
2011-06-16 13:21 ` David Beberman
2011-06-16 10:40 ` Marek Lindner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201106161240.57198.lindner_marek@yahoo.de \
--to=lindner_marek@yahoo.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox