[B.A.T.M.A.N.] [PATCH] batman-adv: readme update (mention ap isolation and new log level)

[B.A.T.M.A.N.] [PATCH] batman-adv: readme update (mention ap isolation and new log level)

[Marek Lindner]

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
---
 README |   13 +++++++------
 1 files changed, 7 insertions(+), 6 deletions(-)

diff --git a/README b/README
index a9ae038..7bcc9f4 100644
--- a/README
+++ b/README
@@ -83,9 +83,9 @@ All  mesh  wide  settings  can be found in batman's own interface
 folder:
 
 #  ls  /sys/class/net/bat0/mesh/
-#  aggregated_ogms  gw_bandwidth  hop_penalty
-#  bonding          gw_mode       orig_interval
-#  fragmentation    gw_sel_class  vis_mode
+#  aggregated_ogms  fragmentation    gw_sel_class     vis_mode
+#  ap_isolation     gw_bandwidth     hop_penalty
+#  bonding          gw_mode          orig_interval
 
 
 There is a special folder for debugging information:
@@ -219,15 +219,16 @@ abled  during run time. Following log_levels are defined:
 
 0 - All  debug  output  disabled
 1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or tt entry added / changed / deleted
-3 - Enable all messages
+2 - Enable messages related to route added / changed / deleted
+4 - Enable messages related to translation table operations
+7 - Enable all messages
 
 The debug output can be changed at runtime  using  the  file
 /sys/class/net/bat0/mesh/log_level. e.g.
 
 # echo 2 > /sys/class/net/bat0/mesh/log_level
 
-will enable debug messages for when routes or TTs change.
+will enable debug messages for when routes change.
 
 
 BATCTL
-- 
1.7.5.3

[B.A.T.M.A.N.] [PATCH] batman-adv: readme update (mention of new log level)

[Marek Lindner]

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
---
 This makes the previous patch obsolete.

 README |    7 ++++---
 1 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/README b/README
index 1e000ee..7bbcea1 100644
--- a/README
+++ b/README
@@ -218,15 +218,16 @@ abled  during run time. Following log_levels are defined:
 
 0 - All  debug  output  disabled
 1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or tt entry added / changed / deleted
-3 - Enable all messages
+2 - Enable messages related to route added / changed / deleted
+4 - Enable messages related to translation table operations
+7 - Enable all messages
 
 The debug output can be changed at runtime  using  the  file
 /sys/class/net/bat0/mesh/log_level. e.g.
 
 # echo 2 > /sys/class/net/bat0/mesh/log_level
 
-will enable debug messages for when routes or TTs change.
+will enable debug messages for when routes change.
 
 
 BATCTL
-- 
1.7.5.3

Re: [B.A.T.M.A.N.] [PATCH] batman-adv: readme update (mention ap isolation and new log level)

[Marek Lindner]

On Tuesday, August 30, 2011 19:32:33 Marek Lindner wrote:
> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
> ---
>  README |   13 +++++++------
>  1 files changed, 7 insertions(+), 6 deletions(-)

Applied in revision 072038e.

Regards,
Marek