[B.A.T.M.A.N.] [PATCH 1/4] batman-adv: Don't automatically build in parallel

[B.A.T.M.A.N.] [PATCH 1/4] batman-adv: Don't automatically build in parallel

[Sven Eckelmann]

Distributions like Gentoo and Debian have policies which make it
necessary to use some kind of environmental variable to control the
parallel build.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
 Makefile |    4 +---
 1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/Makefile b/Makefile
index 3374687..15f099e 100644
--- a/Makefile
+++ b/Makefile
@@ -33,12 +33,10 @@ REVISION= $(shell	if [ -d .git ]; then \
 				echo $$(git describe --always --dirty --match "v*" |sed 's/^v//' 2> /dev/null || echo "[unknown]"); \
 			fi)
 
-NUM_CPUS = $(shell nproc 2> /dev/null || echo 1)
-
 include $(PWD)/Makefile.kbuild
 
 all:
-	$(MAKE) -C $(KERNELPATH) REVISION=$(REVISION) M=$(PWD) PWD=$(PWD) -j $(NUM_CPUS) modules
+	$(MAKE) -C $(KERNELPATH) REVISION=$(REVISION) M=$(PWD) PWD=$(PWD) modules
 
 clean:
 	$(MAKE) -C $(KERNELPATH) M=$(PWD) PWD=$(PWD) clean
-- 
1.7.7.3

[B.A.T.M.A.N.] [PATCH 2/4] batman-adv: Remove OpenWRT specific makefile rules

[Sven Eckelmann]

Makefile and Makefile.kbuild are included by the linux kbuild environment to
build the kernel module. Rules by other build systems could lead to hard to
debug problems and therefore should be avoided.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
 Makefile.kbuild |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)

diff --git a/Makefile.kbuild b/Makefile.kbuild
index bd7e93c..3c51455 100644
--- a/Makefile.kbuild
+++ b/Makefile.kbuild
@@ -18,13 +18,6 @@
 # 02110-1301, USA
 #
 
-
-
-# openwrt integration
-ifeq ($(MAKING_MODULES),1)
--include $(TOPDIR)/Rules.make
-endif
-
 # ccflags-y += -DCONFIG_BATMAN_ADV_DEBUG
 
 ifneq ($(REVISION),)
-- 
1.7.7.3

[B.A.T.M.A.N.] [PATCH 3/4] batman-adv: Remove non-kernel parts from Makefile.kbuild

[Sven Eckelmann]

The standalone batman-adv module is sent to the linux kernel maintainers to be
merged by them. A batman-adv developer has to manually merge the changes since
the last submission and apply it on top of the current linux development tree.
The standalone sources have to provide an additional layer that increases the
compatibility to kernels and to give a better user experience. This layer will
not be sent to the kernel maintainers and has to manually removed each time.

To reduce this work, the Makefile.kbuild should be cleaned up to be only the
vanilla version of the Makefile in the kernel. The Makefile in the standalone
sources is used to provide most of the additional layer.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
 Makefile        |    8 +++++++-
 Makefile.kbuild |    9 +--------
 2 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/Makefile b/Makefile
index 15f099e..4f338aa 100644
--- a/Makefile
+++ b/Makefile
@@ -33,10 +33,16 @@ REVISION= $(shell	if [ -d .git ]; then \
 				echo $$(git describe --always --dirty --match "v*" |sed 's/^v//' 2> /dev/null || echo "[unknown]"); \
 			fi)
 
+CONFIG_BATMAN_ADV=m
+batman-adv-y += compat.o
+ifneq ($(REVISION),)
+ccflags-y += -DSOURCE_VERSION=\"$(REVISION)\"
+endif
+# ccflags-y += -DCONFIG_BATMAN_ADV_DEBUG
 include $(PWD)/Makefile.kbuild
 
 all:
-	$(MAKE) -C $(KERNELPATH) REVISION=$(REVISION) M=$(PWD) PWD=$(PWD) modules
+	$(MAKE) -C $(KERNELPATH) M=$(PWD) PWD=$(PWD) modules
 
 clean:
 	$(MAKE) -C $(KERNELPATH) M=$(PWD) PWD=$(PWD) clean
diff --git a/Makefile.kbuild b/Makefile.kbuild
index 3c51455..ce68611 100644
--- a/Makefile.kbuild
+++ b/Makefile.kbuild
@@ -18,13 +18,7 @@
 # 02110-1301, USA
 #
 
-# ccflags-y += -DCONFIG_BATMAN_ADV_DEBUG
-
-ifneq ($(REVISION),)
-ccflags-y += -DSOURCE_VERSION=\"$(REVISION)\"
-endif
-
-obj-m += batman-adv.o
+obj-$(CONFIG_BATMAN_ADV) += batman-adv.o
 batman-adv-y += bat_debugfs.o
 batman-adv-y += bat_iv_ogm.o
 batman-adv-y += bat_sysfs.o
@@ -43,4 +37,3 @@ batman-adv-y += soft-interface.o
 batman-adv-y += translation-table.o
 batman-adv-y += unicast.o
 batman-adv-y += vis.o
-batman-adv-y += compat.o
-- 
1.7.7.3

[B.A.T.M.A.N.] [PATCH 4/4] batman-adv: Allow to enable features without editing Makefile

[Sven Eckelmann]

The user should not be encouraged to edit sources to prevent inconsistent
changes. Upcoming features will not only use preprocessor variables to enable
or disable itself, but also need to compile specific files at the same time.
Therefore, it is safer to provide make parameters which can enable everything
necessary for a specific option and look similar to the .config options of the
kernel.

It is not possible to disable features enabled by the target kernel because the
include/generated/autoconf.h of the kernel sources isn't regenerated by a
module build. Hence, it is better not to disable features in the makefile by
default because the preprocessor will not have the same information. This can
be changed later by a more complex configuration system that generates an own
compat_autoconf.h that is included by compat.h. This header would have to

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
 Makefile |    7 +++++--
 README   |    6 +++---
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/Makefile b/Makefile
index 4f338aa..e78e797 100644
--- a/Makefile
+++ b/Makefile
@@ -18,7 +18,10 @@
 # 02110-1301, USA
 #
 
-
+# uncomment the CONFIG_* line to enable the related feature
+# features enabled in the target kernel configuration cannot be disabled
+# B.A.T.M.A.N. debugging:
+# CONFIG_BATMAN_ADV_DEBUG=y
 
 PWD:=$(shell pwd)
 KERNELPATH ?= /lib/modules/$(shell uname -r)/build
@@ -38,7 +41,7 @@ batman-adv-y += compat.o
 ifneq ($(REVISION),)
 ccflags-y += -DSOURCE_VERSION=\"$(REVISION)\"
 endif
-# ccflags-y += -DCONFIG_BATMAN_ADV_DEBUG
+ccflags-$(CONFIG_BATMAN_ADV_DEBUG) += -DCONFIG_BATMAN_ADV_DEBUG
 include $(PWD)/Makefile.kbuild
 
 all:
diff --git a/README b/README
index 7404c0a..ddc9569 100644
--- a/README
+++ b/README
@@ -207,10 +207,10 @@ times  necessary  to see more detail debug messages. This must be
 enabled when compiling the batman-adv module. When building  bat-
 man-adv  as  part of kernel, use "make menuconfig" and enable the
 option "B.A.T.M.A.N. debugging". When compiling  outside  of  the
-kernel  tree it is necessary to edit the file Makefile.kbuild and
-uncomment the line
+kernel  tree it is necessary to enable  it using  the make option
+CONFIG_BATMAN_ADV_DEBUG=y
 
-#ccflags-y += -DCONFIG_BATMAN_ADV_DEBUG
+# make CONFIG_BATMAN_ADV_DEBUG=y
 
 Those additional  debug messages can be accessed  using a special
 file in debugfs
-- 
1.7.7.3

Re: [B.A.T.M.A.N.] [PATCH 4/4] batman-adv: Allow to enable features without editing Makefile

[Sven Eckelmann]

[-- Attachment #1: Type: text/plain, Size: 341 bytes --]

On Sunday 04 December 2011 20:10:48 Sven Eckelmann wrote:
[...]
> generates an own compat_autoconf.h that is included by compat.h. This
> header would have to
[...]

I should have checked that a line doesn't begin with #... nevertheless: 
"define/undef all preprocessor variables used to configure batman-adv 
features".

Kind regards,
	Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [B.A.T.M.A.N.] [PATCH 1/4] batman-adv: Don't automatically build in parallel

[Marek Lindner]

On Monday, December 05, 2011 03:10:45 Sven Eckelmann wrote:
> Distributions like Gentoo and Debian have policies which make it
> necessary to use some kind of environmental variable to control the
> parallel build.

Applied in revision 63b3c66.

Thanks,
Marek

Re: [B.A.T.M.A.N.] [PATCH 2/4] batman-adv: Remove OpenWRT specific makefile rules

[Marek Lindner]

On Monday, December 05, 2011 03:10:46 Sven Eckelmann wrote:
> Makefile and Makefile.kbuild are included by the linux kbuild environment
> to build the kernel module. Rules by other build systems could lead to
> hard to debug problems and therefore should be avoided.

Applied in revision fac4043.

Thanks,
Marek

Re: [B.A.T.M.A.N.] [PATCH 3/4] batman-adv: Remove non-kernel parts from Makefile.kbuild

[Marek Lindner]

On Monday, December 05, 2011 03:10:47 Sven Eckelmann wrote:
> The standalone batman-adv module is sent to the linux kernel maintainers to
> be merged by them. A batman-adv developer has to manually merge the
> changes since the last submission and apply it on top of the current linux
> development tree. The standalone sources have to provide an additional
> layer that increases the compatibility to kernels and to give a better
> user experience. This layer will not be sent to the kernel maintainers and
> has to manually removed each time.
> 
> To reduce this work, the Makefile.kbuild should be cleaned up to be only
> the vanilla version of the Makefile in the kernel. The Makefile in the
> standalone sources is used to provide most of the additional layer.

Applied in revision b49b17f.

Thanks,
Marek

Re: [B.A.T.M.A.N.] [PATCH 4/4] batman-adv: Allow to enable features without editing Makefile

[Marek Lindner]

On Monday, December 05, 2011 03:16:05 Sven Eckelmann wrote:
>   On Sunday 04 December 2011 20:10:48 Sven Eckelmann wrote:
> [...]
> 
> > generates an own compat_autoconf.h that is included by compat.h. This
> > header would have to
> 
> [...]
> 
> I should have checked that a line doesn't begin with #... nevertheless: 
> "define/undef all preprocessor variables used to configure batman-adv 
> features".

Applied in revision b3d474c.

Thanks,
Marek