public inbox for b.a.t.m.a.n@lists.open-mesh.org
 help / color / mirror / Atom feed
From: Antonio Quartulli <ordex@autistici.org>
To: The list for a Better Approach To Mobile Ad-hoc Networking
	<b.a.t.m.a.n@lists.open-mesh.org>
Subject: Re: [B.A.T.M.A.N.] ap_isolation issue
Date: Fri, 27 Jan 2012 15:45:10 +0100	[thread overview]
Message-ID: <20120127144509.GC7367@ritirata.org> (raw)
In-Reply-To: <559EA128-76CA-4431-80B7-8ECB37D3CEB5@net-forces.com>

On Fri, Jan 27, 2012 at 09:30:05AM -0500, Andre Courchesne wrote:
> Hi Antonio,
> 
>   Thanks for the reply. I will attempt these tests today and provide you as much feedback as possible.

Thank you. 

> 
>   We are using loop avoidance because in some (if not all) installations we will be doing there will be multiple AP wired to the same network to provide redundancy. And if we move to LoopAvoidance-II if I understand correctlt if should also provide bandwidth balancing correct ?
> 

it depends on what you mean. Incoming traffic will enter the LAN through the "best"
(depending on the TQ) node. While the current implementation, IIRC, provides
only one fixed entry point. But please, don't mix topic :)


Cheers,

> 
> On 2012-01-27, at 8:36 AM, Antonio Quartulli wrote:
> 
> > Hello Andre,
> > 
> > On Thu, Jan 26, 2012 at 04:46:44 -0500, Andre Courchesne wrote:
> >> Ok, did a bit of tcpdump and my test was the following:
> > 
> > [cut]
> > 
> >> 
> >> 
> > 
> > Thank you for reporting this issue and sending us the dumps.
> > Actually it is very hard to link the ap isolation mechanism to this problem.
> > 
> > First of all I would like to make a simple test. Please, could you use dump
> > packets received on T003 and see if the ARP request (the first one that receives no reply)
> > reaches the node (T003)?
> > 
> > In particular I would
> > suggest you to use wireshark (it can parse batman packets) and to sniff at the
> > same time packets either from the physical interface used by the mesh (I'd say wlan0)
> > and bat0.
> > 
> > Then tell us if you see the ARP request on both interfaces, on wlan0 only or on none 
> > of them.
> > 
> > 
> > Another question, why are you using the bridge loop avoidance? If possible I
> > would like you to disable any optional feature you have in order to have the
> > cleanest testbed possible. I know that you already tried to disable it without
> > effect, but it is better to perform test without any other "noise".
> > 
> > Cheers,
> > 
> > -- 
> > Antonio Quartulli
> > 
> > ..each of us alone is worth nothing..
> > Ernesto "Che" Guevara

-- 
Antonio Quartulli

..each of us alone is worth nothing..
Ernesto "Che" Guevara

  reply	other threads:[~2012-01-27 14:45 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-26 17:27 [B.A.T.M.A.N.] ap_isolation issue Andre Courchesne
2012-01-26 19:13 ` Marek Lindner
2012-01-26 19:44   ` Andre Courchesne
2012-01-26 20:39   ` Andre Courchesne
2012-01-26 20:45     ` Marek Lindner
2012-01-26 21:46       ` Andre Courchesne
2012-01-27 13:36         ` Antonio Quartulli
2012-01-27 14:30           ` Andre Courchesne
2012-01-27 14:45             ` Antonio Quartulli [this message]
2012-01-31 21:37               ` Andre Courchesne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120127144509.GC7367@ritirata.org \
    --to=ordex@autistici.org \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox