From: Antonio Quartulli <ordex@autistici.org>
To: The list for a Better Approach To Mobile Ad-hoc Networking
<b.a.t.m.a.n@lists.open-mesh.org>
Subject: Re: [B.A.T.M.A.N.] [PATCH 1/2] batman-adv: Write lockdep xmit class in late initialization phase
Date: Thu, 30 Aug 2012 13:46:55 +0200 [thread overview]
Message-ID: <20120830114655.GC29563@ritirata.org> (raw)
In-Reply-To: <1346057631-2382-1-git-send-email-sven@narfation.org>
[-- Attachment #1: Type: text/plain, Size: 3016 bytes --]
On Mon, Aug 27, 2012 at 10:53:50AM +0200, Sven Eckelmann wrote:
> e27bb6fa916451e9eaced16e7c21d5b71a3b7f30 ("batman-adv: Set special lockdep
> classes to avoid lockdep warning") introduced a lockdep class for the tx queue,
> but did not set it in the correct initialization phase. The batman-adv specific
> lock class could be replaced by a later netdevice registration phase.
>
> Reported-by: Antonio Quartulli <ordex@autistici.org>
> Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tested-by: Antonio Quartulli <ordex@autistici.org>
This solves the problem reported in bug #162! Thank you Sven!
> ---
> soft-interface.c | 35 ++++++++++++++++++++++++-----------
> 1 file changed, 24 insertions(+), 11 deletions(-)
>
> diff --git a/soft-interface.c b/soft-interface.c
> index a584f62..72d8767 100644
> --- a/soft-interface.c
> +++ b/soft-interface.c
> @@ -352,16 +352,6 @@ out:
> return;
> }
>
> -static const struct net_device_ops batadv_netdev_ops = {
> - .ndo_open = batadv_interface_open,
> - .ndo_stop = batadv_interface_release,
> - .ndo_get_stats = batadv_interface_stats,
> - .ndo_set_mac_address = batadv_interface_set_mac_addr,
> - .ndo_change_mtu = batadv_interface_change_mtu,
> - .ndo_start_xmit = batadv_interface_tx,
> - .ndo_validate_addr = eth_validate_addr
> -};
> -
> /* batman-adv network devices have devices nesting below it and are a special
> * "super class" of normal network devices; split their locks off into a
> * separate class since they always nest.
> @@ -382,6 +372,30 @@ static void batadv_set_lockdep_class(struct net_device *dev)
> netdev_for_each_tx_queue(dev, batadv_set_lockdep_class_one, NULL);
> }
>
> +/**
> + * batadv_softif_init - Late stage initialization of soft interface
> + * @dev: registered network device to modify
> + *
> + * Returns error code on failures
> + */
> +static int batadv_softif_init(struct net_device *dev)
> +{
> + batadv_set_lockdep_class(dev);
> +
> + return 0;
> +}
> +
> +static const struct net_device_ops batadv_netdev_ops = {
> + .ndo_init = batadv_softif_init,
> + .ndo_open = batadv_interface_open,
> + .ndo_stop = batadv_interface_release,
> + .ndo_get_stats = batadv_interface_stats,
> + .ndo_set_mac_address = batadv_interface_set_mac_addr,
> + .ndo_change_mtu = batadv_interface_change_mtu,
> + .ndo_start_xmit = batadv_interface_tx,
> + .ndo_validate_addr = eth_validate_addr
> +};
> +
> static void batadv_interface_setup(struct net_device *dev)
> {
> struct batadv_priv *priv = netdev_priv(dev);
> @@ -391,7 +405,6 @@ static void batadv_interface_setup(struct net_device *dev)
> dev->netdev_ops = &batadv_netdev_ops;
> dev->destructor = free_netdev;
> dev->tx_queue_len = 0;
> - batadv_set_lockdep_class(dev);
>
> /* can't call min_mtu, because the needed variables
> * have not been initialized yet
> --
> 1.7.10.4
--
Antonio Quartulli
..each of us alone is worth nothing..
Ernesto "Che" Guevara
[-- Attachment #2: Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2012-08-30 11:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-27 8:53 [B.A.T.M.A.N.] [PATCH 1/2] batman-adv: Write lockdep xmit class in late initialization phase Sven Eckelmann
2012-08-27 8:53 ` [B.A.T.M.A.N.] [PATCH 2/2] batman-adv: Add KernelDoc for soft-interface lockdep functions Sven Eckelmann
2012-09-09 8:15 ` Marek Lindner
2012-08-30 11:46 ` Antonio Quartulli [this message]
2012-09-09 8:13 ` [B.A.T.M.A.N.] [PATCH 1/2] batman-adv: Write lockdep xmit class in late initialization phase Marek Lindner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120830114655.GC29563@ritirata.org \
--to=ordex@autistici.org \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox