[B.A.T.M.A.N.] [PATCH] batman-adv: sysfs documentation should keep alphabetical order

Marek Lindner
2012-10-21T09:02:25Z

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
---
sysfs-class-net-batman-adv | 11 ++++++-----
sysfs-class-net-mesh | 40 ++++++++++++++++++++--------------------
2 files changed, 26 insertions(+), 25 deletions(-)

diff --git a/sysfs-class-net-batman-adv b/sysfs-class-net-batman-adv
index 38dd762..bdc0070 100644
--- a/sysfs-class-net-batman-adv
+++ b/sysfs-class-net-batman-adv
@@ -1,4 +1,10 @@

+What: /sys/class/net/<iface>/batman-adv/iface_status
+Date: May 2010
+Contact: Marek Lindner <lindner_marek@yahoo.de>
+Description:
+ Indicates the status of <iface> as it is seen by batman.
+
What: /sys/class/net/<iface>/batman-adv/mesh_iface
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
@@ -7,8 +13,3 @@ Description:
displays the batman mesh interface this <iface>
currently is associated with.

-What: /sys/class/net/<iface>/batman-adv/iface_status
-Date: May 2010
-Contact: Marek Lindner <lindner_marek@yahoo.de>
-Description:
- Indicates the status of <iface> as it is seen by batman.
diff --git a/sysfs-class-net-mesh b/sysfs-class-net-mesh
index c81fe89..bc41da6 100644
--- a/sysfs-class-net-mesh
+++ b/sysfs-class-net-mesh
@@ -6,6 +6,14 @@ Description:
Indicates whether the batman protocol messages of the
mesh <mesh_iface> shall be aggregated or not.

+What: /sys/class/net/<mesh_iface>/mesh/ap_isolation
+Date: May 2011
+Contact: Antonio Quartulli <ordex@autistici.org>
+Description:
+ Indicates whether the data traffic going from a
+ wireless client to another wireless client will be
+ silently dropped.
+
What: /sys/class/net/<mesh_iface>/mesh/bonding
Date: June 2010
Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
@@ -31,14 +39,6 @@ Description:
mesh will be fragmented or silently discarded if the
packet size exceeds the outgoing interface MTU.

-What: /sys/class/net/<mesh_iface>/mesh/ap_isolation
-Date: May 2011
-Contact: Antonio Quartulli <ordex@autistici.org>
-Description:
- Indicates whether the data traffic going from a
- wireless client to another wireless client will be
- silently dropped.
-
What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
Date: October 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
@@ -60,6 +60,13 @@ Description:
Defines the selection criteria this node will use
to choose a gateway if gw_mode was set to 'client'.

+What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date: Oct 2010
+Contact: Linus Lüssing <linus.luessing@web.de>
+Description:
+ Defines the penalty which will be applied to an
+ originator message's tq-field on every hop.
+
What: /sys/class/net/<mesh_iface>/mesh/orig_interval
Date: May 2010
Contact: Marek Lindner <lindner_marek@yahoo.de>
@@ -67,19 +74,12 @@ Description:
Defines the interval in milliseconds in which batman
sends its protocol messages.

-What: /sys/class/net/<mesh_iface>/mesh/hop_penalty
-Date: Oct 2010
-Contact: Linus Lüssing <linus.luessing@web.de>
-Description:
- Defines the penalty which will be applied to an
- originator message's tq-field on every hop.
-
-What: /sys/class/net/<mesh_iface>/mesh/routing_algo
-Date: Dec 2011
-Contact: Marek Lindner <lindner_marek@yahoo.de>
+What: /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date: Dec 2011
+Contact: Marek Lindner <lindner_marek@yahoo.de>
Description:
- Defines the routing procotol this mesh instance
- uses to find the optimal paths through the mesh.
+ Defines the routing procotol this mesh instance
+ uses to find the optimal paths through the mesh.

What: /sys/class/net/<mesh_iface>/mesh/vis_mode
Date: May 2010
--
1.7.10.4