From: Marek Lindner <lindner_marek@yahoo.de>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: netdev@vger.kernel.org, Pau Koning <paukoning@gmail.com>
Subject: Re: [B.A.T.M.A.N.] batman-adv: Unable to add interface in LXC
Date: Mon, 31 Dec 2012 15:11:24 +0800 [thread overview]
Message-ID: <201212311511.24877.lindner_marek@yahoo.de> (raw)
In-Reply-To: <CANiGF9-dq-HrvWrgu9EMC94rP=1YdrmaFbCF2g1SZ9ocu77ysw@mail.gmail.com>
On Monday, December 31, 2012 03:34:38 Pau Koning wrote:
> I am running LXC (SID) under Debian SID and the current git version of
> batman-adv (v3.7-rc7-1325-gaf5d4f7) +batctl (v2012.4.0-30-ga395164).
> But it fails to add any of my interfaces and non-batman-adv interfaces
> can be created without problems
>
> # ip link
> 13: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> state UP mode DEFAULT qlen 1000
> link/ether 00:ff:aa:00:00:01 brd ff:ff:ff:ff:ff:ff
> 15: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
> mode DEFAULT
> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> # batctl if add eth0
> Error - can't open file '/sys/class/net/eth0/batman_adv/mesh_iface':
> Read-only file system
Did you check your kernel log messages ? I'd expect batman-adv to print
something there in case of an error.
Cheers,
Marek
next prev parent reply other threads:[~2012-12-31 7:11 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-30 19:34 [B.A.T.M.A.N.] batman-adv: Unable to add interface in LXC Pau Koning
2012-12-31 7:11 ` Marek Lindner [this message]
2013-01-21 9:11 ` Pau Koning
2013-01-24 12:17 ` Antonio Quartulli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201212311511.24877.lindner_marek@yahoo.de \
--to=lindner_marek@yahoo.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=netdev@vger.kernel.org \
--cc=paukoning@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox