From: Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de>
To: The list for a Better Approach To Mobile Ad-hoc Networking
<b.a.t.m.a.n@lists.open-mesh.org>
Subject: Re: [B.A.T.M.A.N.] [PATCHv2] batman-adv: add compat support for the new netlink ops
Date: Tue, 26 Feb 2013 22:28:13 +0100 [thread overview]
Message-ID: <20130226212813.GA8249@pandem0nium> (raw)
In-Reply-To: <1361372251-27623-1-git-send-email-ordex@autistici.org>
[-- Attachment #1: Type: text/plain, Size: 2763 bytes --]
Hey guys,
As requested, just did a quick test again:
* batctl if add $iface && some OGMS here && batctl if del $iface
--> still works fine
* batctl link add dev bat0 type batadv
--> creates the bat0 interface
* ip link set dev eth0 master bat0
--> no output, no effect
* ip link del dev bat0
--> deletes the bat0 interface
Used: Debian stable (squeeze) with original kernel (linux-iamge-2.6.32-5-686, version 2.6.32-46)
batctl (2012.1.0-1) and iproute (20120521-3) from wheezy
So no difference noticed here. :)
I've checked back with iproute package from squeeze (20120521-3):
* "ip link add dev bat0 type batadv" still works
* "ip link set dev eth0 master bat0" throws an error and does nothing:
Error: either "dev" is duplicate, or "master" is a garbage.
so to summarize: it compiles again, batctl works, and ip at least allows to add the bat0
interface but adding interfaces into a softiface using ip doesn't.
Hope that helps!
Cheers,
Simon
Tested-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
On Wed, Feb 20, 2013 at 03:57:31PM +0100, Antonio Quartulli wrote:
> This patches enable the new rtnl ops to compile on kernels starting from 2.6.32
>
> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
> ---
>
> v2:
> - do not handle ioctl. just return EOPNOTSUPP
>
> compat.h | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/compat.h b/compat.h
> index 425b3d9..23ced4a 100644
> --- a/compat.h
> +++ b/compat.h
> @@ -71,6 +71,9 @@ static inline void batadv_this_cpu_add(uint64_t *count_ptr, size_t count)
> put_cpu();
> }
>
> +#define batadv_softif_destroy_netlink(dev, head) batadv_softif_destroy_netlink(dev)
> +#define unregister_netdevice_queue(dev, head) unregister_netdevice(dev)
> +
> #endif /* < KERNEL_VERSION(2, 6, 33) */
>
>
> @@ -132,6 +135,24 @@ static inline int batadv_param_set_copystring(const char *val,
> #define kstrtoul strict_strtoul
> #define kstrtol strict_strtol
>
> +#define batadv_softif_slave_add(x, y) \
> +batadv_softif_slave_add(struct net_device *dev, struct ifreq *rq, int cmd)\
> +{\
> + return -EOPNOTSUPP;\
> +}\
> +static int __attribute__((unused)) __batadv_softif_slave_add(x, y)
> +
> +#define batadv_softif_slave_del(x, y) \
> +__batadv_softif_slave_del(struct net_device *dev, struct net_device *slave_dev);\
> +static int batadv_softif_slave_del(struct net_device *dev, struct ifreq *rq, int cmd)\
> +{\
> + return -EOPNOTSUPP;\
> +}\
> +static int __attribute__((unused)) __batadv_softif_slave_del(x, y)
> +
> +#define ndo_add_slave ndo_do_ioctl
> +#define ndo_del_slave ndo_do_ioctl
> +
> #endif /* < KERNEL_VERSION(2, 6, 39) */
>
>
> --
> 1.8.1.2
>
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2013-02-26 21:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-17 14:43 [B.A.T.M.A.N.] [PATCH] batman-adv: add compat support for the new netlink ops Antonio Quartulli
2013-02-18 23:49 ` Simon Wunderlich
2013-02-19 1:08 ` Marek Lindner
2013-02-19 21:43 ` Simon Wunderlich
2013-02-20 13:26 ` Antonio Quartulli
2013-02-20 14:14 ` Simon Wunderlich
2013-02-20 14:27 ` Antonio Quartulli
2013-02-20 14:40 ` Antonio Quartulli
2013-02-20 14:57 ` [B.A.T.M.A.N.] [PATCHv2] " Antonio Quartulli
2013-02-26 21:28 ` Simon Wunderlich [this message]
2013-02-26 21:31 ` Antonio Quartulli
2013-02-27 3:20 ` Marek Lindner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130226212813.GA8249@pandem0nium \
--to=simon.wunderlich@s2003.tu-chemnitz.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox