From: Simon Wunderlich <sw@simonwunderlich.de>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] How to set up the communication in layer 3 in mesh node with batman.adv
Date: Fri, 1 Aug 2014 15:00:01 +0200 [thread overview]
Message-ID: <201408011500.02247.sw@simonwunderlich.de> (raw)
In-Reply-To: <53DB84A3.8070309@aliyun.com>
> hello, eveyone.I am a b.a.t.m.a.n. beginner.I work on openwrt with
> batman-adv 2012.3.0.
>
> There are three mesh nodes. Node A is far from node C. A can't communicate
> with C directly, but it can commuticate with C via node B, which is
> between A and C. The path is A <--> B <--> C.
>
> On node A, I can run the command 'batctl ping' to node B and node C
> successfully. I can also 'ping' the node B, but I can't 'ping' node C. It
> shows that I have set up the commuication with all the nodes in layer 2,
> but I can only communicate with the neighbor in layer 3.
>
> How can I fix this? Thanks.
Can you ping the node C from node B? What kind of IP addresses have you
configured? Also, the version you use is pretty old, although this kind of
basic network should still work ... You can also try "batctl td" to find out
where the packets get lost.
Cheers,
Simon
prev parent reply other threads:[~2014-08-01 13:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-01 12:14 [B.A.T.M.A.N.] How to set up the communication in layer 3 in mesh node with batman.adv liudows
2014-08-01 13:00 ` Simon Wunderlich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201408011500.02247.sw@simonwunderlich.de \
--to=sw@simonwunderlich.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox