From: Antonio Quartulli <a@unstable.cc>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Antonio Quartulli <a@unstable.cc>
Subject: [B.A.T.M.A.N.] [PATCH v5 1/4] batman-adv: make the GW selection class algorithm specific
Date: Sun, 12 Jun 2016 12:14:23 +0800 [thread overview]
Message-ID: <20160612041426.26339-2-a@unstable.cc> (raw)
In-Reply-To: <20160612041426.26339-1-a@unstable.cc>
The B.A.T.M.A.N. V algorithm uses a different metric compared to its
predecessor and for this reason the logic used to compute the best
Gateway is also changed. This means that the GW selection class
fed to this logic has a semantics that depends on the algorithm being
used.
Make the parsing and printing routine of the GW selection class
routing algorithm specific. Each algorithm can now parse (and print)
this value independently.
If no API is provided by any algorithm, the default is to use the
current mechanism of considering such value like an integer between
1 and 255.
Signed-off-by: Antonio Quartulli <a@unstable.cc>
---
net/batman-adv/bat_v.c | 34 ++++++++++++++++++++++++++++++++++
net/batman-adv/sysfs.c | 34 ++++++++++++++++++++++++++++++++--
net/batman-adv/types.h | 13 +++++++++++++
3 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c
index 0366cbf..90fd5ee 100644
--- a/net/batman-adv/bat_v.c
+++ b/net/batman-adv/bat_v.c
@@ -21,8 +21,10 @@
#include <linux/atomic.h>
#include <linux/bug.h>
#include <linux/cache.h>
+#include <linux/errno.h>
#include <linux/init.h>
#include <linux/jiffies.h>
+#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
@@ -34,6 +36,8 @@
#include "bat_algo.h"
#include "bat_v_elp.h"
#include "bat_v_ogm.h"
+#include "gateway_client.h"
+#include "gateway_common.h"
#include "hard-interface.h"
#include "hash.h"
#include "originator.h"
@@ -320,6 +324,32 @@ err_ifinfo1:
return ret;
}
+static ssize_t batadv_v_store_sel_class(struct batadv_priv *bat_priv,
+ char *buff, size_t count)
+{
+ u32 old_class, class;
+
+ if (!batadv_parse_throughput(bat_priv->soft_iface, buff,
+ "B.A.T.M.A.N. V GW selection class",
+ &class))
+ return -EINVAL;
+
+ old_class = atomic_read(&bat_priv->gw.sel_class);
+ atomic_set(&bat_priv->gw.sel_class, class);
+
+ if (old_class != class)
+ batadv_gw_reselect(bat_priv);
+
+ return count;
+}
+
+static ssize_t batadv_v_show_sel_class(struct batadv_priv *bat_priv, char *buff)
+{
+ u32 class = atomic_read(&bat_priv->gw.sel_class);
+
+ return sprintf(buff, "%u.%u MBit\n", class / 10, class % 10);
+}
+
static struct batadv_algo_ops batadv_batman_v __read_mostly = {
.name = "BATMAN_V",
.iface = {
@@ -338,6 +368,10 @@ static struct batadv_algo_ops batadv_batman_v __read_mostly = {
.orig = {
.print = batadv_v_orig_print,
},
+ .gw = {
+ .store_sel_class = batadv_v_store_sel_class,
+ .show_sel_class = batadv_v_show_sel_class,
+ },
};
/**
diff --git a/net/batman-adv/sysfs.c b/net/batman-adv/sysfs.c
index fe9ca94..bb43742 100644
--- a/net/batman-adv/sysfs.c
+++ b/net/batman-adv/sysfs.c
@@ -514,6 +514,36 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj,
return count;
}
+static ssize_t batadv_show_gw_sel_class(struct kobject *kobj,
+ struct attribute *attr, char *buff)
+{
+ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
+
+ if (bat_priv->algo_ops->gw.show_sel_class)
+ return bat_priv->algo_ops->gw.show_sel_class(bat_priv, buff);
+
+ return sprintf(buff, "%i\n", atomic_read(&bat_priv->gw.sel_class));
+}
+
+static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
+ struct attribute *attr, char *buff,
+ size_t count)
+{
+ struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
+
+ if (buff[count - 1] == '\n')
+ buff[count - 1] = '\0';
+
+ if (bat_priv->algo_ops->gw.store_sel_class)
+ return bat_priv->algo_ops->gw.store_sel_class(bat_priv, buff,
+ count);
+
+ return __batadv_store_uint_attr(buff, count, 1, BATADV_TQ_MAX_VALUE,
+ batadv_post_gw_reselect, attr,
+ &bat_priv->gw.sel_class,
+ bat_priv->soft_iface);
+}
+
static ssize_t batadv_show_gw_bwidth(struct kobject *kobj,
struct attribute *attr, char *buff)
{
@@ -625,8 +655,8 @@ BATADV_ATTR_SIF_UINT(orig_interval, orig_interval, S_IRUGO | S_IWUSR,
2 * BATADV_JITTER, INT_MAX, NULL);
BATADV_ATTR_SIF_UINT(hop_penalty, hop_penalty, S_IRUGO | S_IWUSR, 0,
BATADV_TQ_MAX_VALUE, NULL);
-BATADV_ATTR_SIF_UINT(gw_sel_class, gw.sel_class, S_IRUGO | S_IWUSR, 1,
- BATADV_TQ_MAX_VALUE, batadv_post_gw_reselect);
+static BATADV_ATTR(gw_sel_class, S_IRUGO | S_IWUSR, batadv_show_gw_sel_class,
+ batadv_store_gw_sel_class);
static BATADV_ATTR(gw_bandwidth, S_IRUGO | S_IWUSR, batadv_show_gw_bwidth,
batadv_store_gw_bwidth);
#ifdef CONFIG_BATMAN_ADV_MCAST
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index 43db7b6..f24d93d 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -1448,12 +1448,24 @@ struct batadv_algo_orig_ops {
};
/**
+ * struct batadv_algo_gw_ops - mesh algorithm callbacks (GW specific)
+ * @store_sel_class: parse and stores a new GW selection class
+ * @show_sel_class: prints the current GW selection class
+ */
+struct batadv_algo_gw_ops {
+ ssize_t (*store_sel_class)(struct batadv_priv *bat_priv, char *buff,
+ size_t count);
+ ssize_t (*show_sel_class)(struct batadv_priv *bat_priv, char *buff);
+};
+
+/**
* struct batadv_algo_ops - mesh algorithm callbacks
* @list: list node for the batadv_algo_list
* @name: name of the algorithm
* @iface: callbacks related to interface handling
* @neigh: callbacks related to neighbors handling
* @orig: callbacks related to originators handling
+ * @gw: callbacks related to GW mode
*/
struct batadv_algo_ops {
struct hlist_node list;
@@ -1461,6 +1473,7 @@ struct batadv_algo_ops {
struct batadv_algo_iface_ops iface;
struct batadv_algo_neigh_ops neigh;
struct batadv_algo_orig_ops orig;
+ struct batadv_algo_gw_ops gw;
};
/**
--
2.8.4
next prev parent reply other threads:[~2016-06-12 4:14 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-12 4:14 [B.A.T.M.A.N.] [PATCH v5 0/6] GW code: make it algorithm-agnostic and add B.A.T.M.A.N. V support Antonio Quartulli
2016-06-12 4:14 ` Antonio Quartulli [this message]
2016-06-13 10:45 ` [B.A.T.M.A.N.] [PATCH v5 1/4] batman-adv: make the GW selection class algorithm specific Sven Eckelmann
2016-06-13 16:02 ` Antonio Quartulli
2016-06-12 4:14 ` [B.A.T.M.A.N.] [PATCH v5 2/4] batman-adv: make GW election code protocol specific Antonio Quartulli
2016-06-13 11:45 ` Sven Eckelmann
2016-06-12 4:14 ` [B.A.T.M.A.N.] [PATCH v5 3/4] batman-adv: B.A.T.M.A.N. V - implement GW selection logic Antonio Quartulli
2016-06-13 11:12 ` Sven Eckelmann
2016-06-13 16:02 ` Antonio Quartulli
2016-06-27 2:41 ` Antonio Quartulli
2016-06-13 11:26 ` Sven Eckelmann
2016-06-27 2:36 ` Antonio Quartulli
2016-06-27 6:19 ` Sven Eckelmann
2016-06-27 6:19 ` Antonio Quartulli
2016-06-13 11:45 ` Sven Eckelmann
2016-06-12 4:14 ` [B.A.T.M.A.N.] [PATCH v5 4/4] batman-adv: disable sysfs knobs when GW-mode is not implemented Antonio Quartulli
2016-06-13 10:47 ` Sven Eckelmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160612041426.26339-2-a@unstable.cc \
--to=a@unstable.cc \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox