From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] [PATCH 4/4] batman-adv: Group ethtool related code together
Date: Sat, 1 Apr 2017 14:47:06 +0200 [thread overview]
Message-ID: <20170401124706.18257-5-sven@narfation.org> (raw)
In-Reply-To: <20170401124706.18257-1-sven@narfation.org>
The ethtool code was spread in soft-interface.c. This makes reading the
code and working on it unnecessary complicated. Having everything in a
common place next to the other code which references it, makes it slightly
easier.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
net/batman-adv/soft-interface.c | 191 +++++++++++++++++++---------------------
1 file changed, 92 insertions(+), 99 deletions(-)
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index c2a00342..7f6a4d34 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -64,21 +64,6 @@
#include "sysfs.h"
#include "translation-table.h"
-static void batadv_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info);
-static void batadv_get_strings(struct net_device *dev, u32 stringset, u8 *data);
-static void batadv_get_ethtool_stats(struct net_device *dev,
- struct ethtool_stats *stats, u64 *data);
-static int batadv_get_sset_count(struct net_device *dev, int stringset);
-
-static const struct ethtool_ops batadv_ethtool_ops = {
- .get_drvinfo = batadv_get_drvinfo,
- .get_link = ethtool_op_get_link,
- .get_strings = batadv_get_strings,
- .get_ethtool_stats = batadv_get_ethtool_stats,
- .get_sset_count = batadv_get_sset_count,
-};
-
int batadv_skb_head_push(struct sk_buff *skb, unsigned int len)
{
int result;
@@ -943,6 +928,98 @@ static const struct net_device_ops batadv_netdev_ops = {
.ndo_del_slave = batadv_softif_slave_del,
};
+static void batadv_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, "B.A.T.M.A.N. advanced", sizeof(info->driver));
+ strlcpy(info->version, BATADV_SOURCE_VERSION, sizeof(info->version));
+ strlcpy(info->fw_version, "N/A", sizeof(info->fw_version));
+ strlcpy(info->bus_info, "batman", sizeof(info->bus_info));
+}
+
+/* Inspired by drivers/net/ethernet/dlink/sundance.c:1702
+ * Declare each description string in struct.name[] to get fixed sized buffer
+ * and compile time checking for strings longer than ETH_GSTRING_LEN.
+ */
+static const struct {
+ const char name[ETH_GSTRING_LEN];
+} batadv_counters_strings[] = {
+ { "tx" },
+ { "tx_bytes" },
+ { "tx_dropped" },
+ { "rx" },
+ { "rx_bytes" },
+ { "forward" },
+ { "forward_bytes" },
+ { "mgmt_tx" },
+ { "mgmt_tx_bytes" },
+ { "mgmt_rx" },
+ { "mgmt_rx_bytes" },
+ { "frag_tx" },
+ { "frag_tx_bytes" },
+ { "frag_rx" },
+ { "frag_rx_bytes" },
+ { "frag_fwd" },
+ { "frag_fwd_bytes" },
+ { "tt_request_tx" },
+ { "tt_request_rx" },
+ { "tt_response_tx" },
+ { "tt_response_rx" },
+ { "tt_roam_adv_tx" },
+ { "tt_roam_adv_rx" },
+#ifdef CONFIG_BATMAN_ADV_DAT
+ { "dat_get_tx" },
+ { "dat_get_rx" },
+ { "dat_put_tx" },
+ { "dat_put_rx" },
+ { "dat_cached_reply_tx" },
+#endif
+#ifdef CONFIG_BATMAN_ADV_NC
+ { "nc_code" },
+ { "nc_code_bytes" },
+ { "nc_recode" },
+ { "nc_recode_bytes" },
+ { "nc_buffer" },
+ { "nc_decode" },
+ { "nc_decode_bytes" },
+ { "nc_decode_failed" },
+ { "nc_sniffed" },
+#endif
+};
+
+static void batadv_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(data, batadv_counters_strings,
+ sizeof(batadv_counters_strings));
+}
+
+static void batadv_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct batadv_priv *bat_priv = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < BATADV_CNT_NUM; i++)
+ data[i] = batadv_sum_counter(bat_priv, i);
+}
+
+static int batadv_get_sset_count(struct net_device *dev, int stringset)
+{
+ if (stringset == ETH_SS_STATS)
+ return BATADV_CNT_NUM;
+
+ return -EOPNOTSUPP;
+}
+
+static const struct ethtool_ops batadv_ethtool_ops = {
+ .get_drvinfo = batadv_get_drvinfo,
+ .get_link = ethtool_op_get_link,
+ .get_strings = batadv_get_strings,
+ .get_ethtool_stats = batadv_get_ethtool_stats,
+ .get_sset_count = batadv_get_sset_count,
+};
+
/**
* batadv_softif_free - Deconstructor of batadv_soft_interface
* @dev: Device to cleanup and remove
@@ -1075,87 +1152,3 @@ struct rtnl_link_ops batadv_link_ops __read_mostly = {
.setup = batadv_softif_init_early,
.dellink = batadv_softif_destroy_netlink,
};
-
-static void batadv_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, "B.A.T.M.A.N. advanced", sizeof(info->driver));
- strlcpy(info->version, BATADV_SOURCE_VERSION, sizeof(info->version));
- strlcpy(info->fw_version, "N/A", sizeof(info->fw_version));
- strlcpy(info->bus_info, "batman", sizeof(info->bus_info));
-}
-
-/* Inspired by drivers/net/ethernet/dlink/sundance.c:1702
- * Declare each description string in struct.name[] to get fixed sized buffer
- * and compile time checking for strings longer than ETH_GSTRING_LEN.
- */
-static const struct {
- const char name[ETH_GSTRING_LEN];
-} batadv_counters_strings[] = {
- { "tx" },
- { "tx_bytes" },
- { "tx_dropped" },
- { "rx" },
- { "rx_bytes" },
- { "forward" },
- { "forward_bytes" },
- { "mgmt_tx" },
- { "mgmt_tx_bytes" },
- { "mgmt_rx" },
- { "mgmt_rx_bytes" },
- { "frag_tx" },
- { "frag_tx_bytes" },
- { "frag_rx" },
- { "frag_rx_bytes" },
- { "frag_fwd" },
- { "frag_fwd_bytes" },
- { "tt_request_tx" },
- { "tt_request_rx" },
- { "tt_response_tx" },
- { "tt_response_rx" },
- { "tt_roam_adv_tx" },
- { "tt_roam_adv_rx" },
-#ifdef CONFIG_BATMAN_ADV_DAT
- { "dat_get_tx" },
- { "dat_get_rx" },
- { "dat_put_tx" },
- { "dat_put_rx" },
- { "dat_cached_reply_tx" },
-#endif
-#ifdef CONFIG_BATMAN_ADV_NC
- { "nc_code" },
- { "nc_code_bytes" },
- { "nc_recode" },
- { "nc_recode_bytes" },
- { "nc_buffer" },
- { "nc_decode" },
- { "nc_decode_bytes" },
- { "nc_decode_failed" },
- { "nc_sniffed" },
-#endif
-};
-
-static void batadv_get_strings(struct net_device *dev, u32 stringset, u8 *data)
-{
- if (stringset == ETH_SS_STATS)
- memcpy(data, batadv_counters_strings,
- sizeof(batadv_counters_strings));
-}
-
-static void batadv_get_ethtool_stats(struct net_device *dev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct batadv_priv *bat_priv = netdev_priv(dev);
- int i;
-
- for (i = 0; i < BATADV_CNT_NUM; i++)
- data[i] = batadv_sum_counter(bat_priv, i);
-}
-
-static int batadv_get_sset_count(struct net_device *dev, int stringset)
-{
- if (stringset == ETH_SS_STATS)
- return BATADV_CNT_NUM;
-
- return -EOPNOTSUPP;
-}
--
2.11.0
next prev parent reply other threads:[~2017-04-01 12:47 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-01 12:47 [B.A.T.M.A.N.] [PATCH 0/4] batman-adv: ethtool code cleanup Sven Eckelmann
2017-04-01 12:47 ` [B.A.T.M.A.N.] [PATCH 1/4] batman-adv: Use ethtool helper to get link status Sven Eckelmann
2017-04-01 12:47 ` [B.A.T.M.A.N.] [PATCH 2/4] batman-adv: Remove ethtool msglevel functions Sven Eckelmann
2017-04-01 12:47 ` [B.A.T.M.A.N.] [PATCH 3/4] batman-adv: Remove ethtool .get_settings stub Sven Eckelmann
2017-04-01 12:47 ` Sven Eckelmann [this message]
2017-04-01 15:35 ` [B.A.T.M.A.N.] [PATCH 0/4] batman-adv: ethtool code cleanup Marek Lindner
2017-04-03 16:12 ` Simon Wunderlich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170401124706.18257-5-sven@narfation.org \
--to=sven@narfation.org \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox