From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Simon Wunderlich Subject: [PATCH 1/1] batman-adv: Don't skb_split skbuffs with frag_list Date: Sun, 8 May 2022 15:21:10 +0200 Message-Id: <20220508132110.20451-2-sw@simonwunderlich.de> In-Reply-To: <20220508132110.20451-1-sw@simonwunderlich.de> References: <20220508132110.20451-1-sw@simonwunderlich.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: davem@davemloft.net, kuba@kernel.org Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org, Sven Eckelmann , Felix Kaechele , Simon Wunderlich From: Sven Eckelmann The receiving interface might have used GRO to receive more fragments than MAX_SKB_FRAGS fragments. In this case, these will not be stored in skb_shinfo(skb)->frags but merged into the frag list. batman-adv relies on the function skb_split to split packets up into multiple smaller packets which are not larger than the MTU on the outgoing interface. But this function cannot handle frag_list entries and is only operating on skb_shinfo(skb)->frags. If it is still trying to split such an skb and xmit'ing it on an interface without support for NETIF_F_FRAGLIST, then validate_xmit_skb() will try to linearize it. But this fails due to inconsistent information. And __pskb_pull_tail will trigger a BUG_ON after skb_copy_bits() returns an error. In case of entries in frag_list, just linearize the skb before operating on it with skb_split(). Reported-by: Felix Kaechele Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann Tested-by: Felix Kaechele Signed-off-by: Simon Wunderlich --- net/batman-adv/fragmentation.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index 0899a729a23f..c120c7c6d25f 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -475,6 +475,17 @@ int batadv_frag_send_packet(struct sk_buff *skb, goto free_skb; } + /* GRO might have added fragments to the fragment list instead of + * frags[]. But this is not handled by skb_split and must be + * linearized to avoid incorrect length information after all + * batman-adv fragments were created and submitted to the + * hard-interface + */ + if (skb_has_frag_list(skb) && __skb_linearize(skb)) { + ret = -ENOMEM; + goto free_skb; + } + /* Create one header to be copied to all fragments */ frag_header.packet_type = BATADV_UNICAST_FRAG; frag_header.version = BATADV_COMPAT_VERSION; -- 2.30.2