From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Sven Eckelmann <sven@narfation.org>
Subject: [PATCH batadv v5 10/20] batman-adv: tt: extract allocation of new local entries
Date: Sat, 29 Aug 2026 08:18:21 +0200 [thread overview]
Message-ID: <20260829-tt-fixes-v5-10-88fce8fd683d@narfation.org> (raw)
In-Reply-To: <20260829-tt-fixes-v5-0-88fce8fd683d@narfation.org>
The code which allocates and initializes a brand new local TT entry makes
up more than a third of batadv_tt_local_add(). It only shares the addr, vid
and iif_is_wifi parameters with the rest of the function.
Move it to batadv_tt_local_create(), which returns the fully initialized
entry. The error paths become plain returns.
The insertion into bat_priv->tt.local_hash intentionally stays in
batadv_tt_local_add(), keeping the extra reference for the hash next to the
error handling which has to drop it again.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
net/batman-adv/translation-table.c | 135 ++++++++++++++++++++++---------------
1 file changed, 79 insertions(+), 56 deletions(-)
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index d040c0d3..8726bbba 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -772,6 +772,84 @@ static bool batadv_tt_iif_is_wifi(struct net *net, int ifindex)
return batadv_is_wifi(wifi_flags);
}
+/**
+ * batadv_tt_local_create() - allocate and initialize a local TT entry
+ * @mesh_iface: netdev struct of the mesh interface
+ * @addr: the mac address of the client to add
+ * @vid: VLAN identifier
+ * @iif_is_wifi: whether the client is connected via a wifi interface
+ *
+ * The returned entry is not yet part of bat_priv->tt.local_hash. It is marked
+ * as BATADV_TT_CLIENT_NEW to avoid sending it in a full table response going
+ * out before the next ttvn increment (consistency check).
+ *
+ * Return: the new entry with an initialized reference counter on success, NULL
+ * otherwise.
+ */
+static struct batadv_tt_local_entry *
+batadv_tt_local_create(struct net_device *mesh_iface, const u8 *addr,
+ unsigned short vid, bool iif_is_wifi)
+{
+ struct batadv_priv *bat_priv = netdev_priv(mesh_iface);
+ struct batadv_tt_local_entry *tt_local;
+ struct batadv_meshif_vlan *vlan;
+ int packet_size_max;
+ int table_size;
+
+ /* Ignore the client if we cannot send it in a full table response. */
+ table_size = batadv_tt_local_table_transmit_size(bat_priv);
+ table_size += batadv_tt_len(1);
+ packet_size_max = READ_ONCE(bat_priv->packet_size_max);
+ if (table_size > packet_size_max) {
+ net_ratelimited_function(batadv_info, mesh_iface,
+ "Local translation table size (%i) exceeds maximum packet size (%i); Ignoring new local tt entry: %pM\n",
+ table_size, packet_size_max, addr);
+ return NULL;
+ }
+
+ tt_local = kmem_cache_alloc(batadv_tl_cache, GFP_ATOMIC);
+ if (!tt_local)
+ return NULL;
+
+ /* increase the refcounter of the related vlan */
+ vlan = batadv_meshif_vlan_get(bat_priv, vid);
+ if (!vlan) {
+ net_ratelimited_function(batadv_info, mesh_iface,
+ "adding TT local entry %pM to non-existent VLAN %d\n",
+ addr, batadv_print_vid(vid));
+ kmem_cache_free(batadv_tl_cache, tt_local);
+ return NULL;
+ }
+
+ batadv_dbg(BATADV_DBG_TT, bat_priv,
+ "Creating new local tt entry: %pM (vid: %d, ttvn: %d)\n",
+ addr, batadv_print_vid(vid),
+ (u8)atomic_read(&bat_priv->tt.vn));
+
+ ether_addr_copy(tt_local->common.addr, addr);
+ tt_local->common.vid = vid;
+ kref_init(&tt_local->common.refcount);
+ tt_local->last_seen = jiffies;
+ tt_local->common.added_at = tt_local->last_seen;
+ tt_local->vlan = vlan;
+ spin_lock_init(&tt_local->common.flags_lock);
+
+ scoped_guard(spinlock_bh, &tt_local->common.flags_lock) {
+ tt_local->common.flags = BATADV_TT_CLIENT_NEW;
+ if (iif_is_wifi)
+ tt_local->common.flags |= BATADV_TT_CLIENT_WIFI;
+
+ /* the batman interface mac and multicast addresses should never
+ * be purged
+ */
+ if (batadv_compare_eth(addr, mesh_iface->dev_addr) ||
+ is_multicast_ether_addr(addr))
+ tt_local->common.flags |= BATADV_TT_CLIENT_NOPURGE;
+ }
+
+ return tt_local;
+}
+
/**
* batadv_tt_local_add() - add a new client to the local table or update an
* existing client
@@ -791,14 +869,11 @@ bool batadv_tt_local_add(struct net_device *mesh_iface, const u8 *addr,
struct batadv_priv *bat_priv = netdev_priv(mesh_iface);
struct batadv_tt_global_entry *tt_global = NULL;
struct batadv_tt_local_entry *tt_local;
- struct batadv_meshif_vlan *vlan;
bool roamed_back = false;
- int packet_size_max;
bool iif_is_wifi;
bool ret = false;
u8 remote_flags;
int hash_added;
- int table_size;
u32 match_mark;
bool modified;
@@ -845,62 +920,10 @@ bool batadv_tt_local_add(struct net_device *mesh_iface, const u8 *addr,
goto check_roaming;
}
- /* Ignore the client if we cannot send it in a full table response. */
- table_size = batadv_tt_local_table_transmit_size(bat_priv);
- table_size += batadv_tt_len(1);
- packet_size_max = READ_ONCE(bat_priv->packet_size_max);
- if (table_size > packet_size_max) {
- net_ratelimited_function(batadv_info, mesh_iface,
- "Local translation table size (%i) exceeds maximum packet size (%i); Ignoring new local tt entry: %pM\n",
- table_size, packet_size_max, addr);
- goto out;
- }
-
- tt_local = kmem_cache_alloc(batadv_tl_cache, GFP_ATOMIC);
+ tt_local = batadv_tt_local_create(mesh_iface, addr, vid, iif_is_wifi);
if (!tt_local)
goto out;
- /* increase the refcounter of the related vlan */
- vlan = batadv_meshif_vlan_get(bat_priv, vid);
- if (!vlan) {
- net_ratelimited_function(batadv_info, mesh_iface,
- "adding TT local entry %pM to non-existent VLAN %d\n",
- addr, batadv_print_vid(vid));
- kmem_cache_free(batadv_tl_cache, tt_local);
- tt_local = NULL;
- goto out;
- }
-
- batadv_dbg(BATADV_DBG_TT, bat_priv,
- "Creating new local tt entry: %pM (vid: %d, ttvn: %d)\n",
- addr, batadv_print_vid(vid),
- (u8)atomic_read(&bat_priv->tt.vn));
-
- ether_addr_copy(tt_local->common.addr, addr);
- tt_local->common.vid = vid;
- kref_init(&tt_local->common.refcount);
- tt_local->last_seen = jiffies;
- tt_local->common.added_at = tt_local->last_seen;
- tt_local->vlan = vlan;
- spin_lock_init(&tt_local->common.flags_lock);
-
- spin_lock_bh(&tt_local->common.flags_lock);
- /* The local entry has to be marked as NEW to avoid to send it in
- * a full table response going out before the next ttvn increment
- * (consistency check)
- */
- tt_local->common.flags = BATADV_TT_CLIENT_NEW;
- if (iif_is_wifi)
- tt_local->common.flags |= BATADV_TT_CLIENT_WIFI;
-
- /* the batman interface mac and multicast addresses should never be
- * purged
- */
- if (batadv_compare_eth(addr, mesh_iface->dev_addr) ||
- is_multicast_ether_addr(addr))
- tt_local->common.flags |= BATADV_TT_CLIENT_NOPURGE;
- spin_unlock_bh(&tt_local->common.flags_lock);
-
kref_get(&tt_local->common.refcount);
hash_added = batadv_hash_add(bat_priv->tt.local_hash, batadv_compare_tt,
batadv_choose_tt, &tt_local->common,
--
2.47.3
next prev parent reply other threads:[~2026-08-29 6:24 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-29 6:18 [PATCH batadv v5 00/20] batman-adv: tt: atomic sashiko fixes Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 01/20] batman-adv: tt: remove only the entry which was looked up from the hash Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 02/20] batman-adv: tt: extract code handling a roam on add Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 03/20] batman-adv: tt: simplify NEW flag transition code Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 04/20] batman-adv: tt: drop unnecessary cleanup goto in helpers Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 05/20] batman-adv: tt: use protected flag modifications Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 06/20] batman-adv: tt: transition NEW local entries only under lock Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 07/20] batman-adv: tt: don't uncount never committed clients on pending purge Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 08/20] batman-adv: tt: decrement count for committed client on local_remove Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 09/20] batman-adv: tt: look up wifi state of incoming interface in helper Sven Eckelmann
2026-08-29 6:18 ` Sven Eckelmann [this message]
2026-08-29 6:18 ` [PATCH batadv v5 11/20] batman-adv: tt: replace forward gotos in batadv_tt_local_add() Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 12/20] batman-adv: tt: extract refresh of existing local entries Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 13/20] batman-adv: tt: extract update of dynamic client flags Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 14/20] batman-adv: tt: extract allocation of new global entries Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 15/20] batman-adv: tt: extract merging of flags into existing " Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 16/20] batman-adv: tt: replace add_orig_entry goto in batadv_tt_global_add() Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 17/20] batman-adv: tt: extract removal of the superseded local entry Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 18/20] batman-adv: tt: extract marking of a removed " Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 19/20] batman-adv: tt: extract immediate purge of a " Sven Eckelmann
2026-08-29 6:18 ` [PATCH batadv v5 20/20] batman-adv: tt: drop the cleanup label from batadv_tt_local_remove() Sven Eckelmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260829-tt-fixes-v5-10-88fce8fd683d@narfation.org \
--to=sven@narfation.org \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox