Hi Jeremy,

On Thursday, January 16, 2020 9:06:50 PM CET Martin, Jeremy J CIV USARMY CCDC 
C5ISR (USA) via B.A.T.M.A.N wrote:
> My/My Teams intent is to have 4 radios in total, 2 on one pc and two on
> another. Our plan is to have Batman take care of the switching between
> which radio to use in order to transmit data between these two PC's. One
> radio is high frequency radio (60 Ghz) and the other would be a lower
> frequency radio and the idea is to have batman switch between these radios
> once the higher frequency radio is dropping between a certain TQ.

BATMAN will switch by default when one link has a better TQ (towards the final 
destination) than the other link, so I believe this should happen by default.

> My
> primary questions regarding this scenario would be, 1) Are there specific
> standards the radio chipsets would need to support in order for them to
> work in this scenario?. 

Normally you would want IBSS mode or 802.11s mode work. BATMAN can also work 
in AP/Sta mode, although the packet loss counting may be biased since 
broadcast handling works a bit different than in IBSS/11s. But for point-to-
point links it might just work.

> 2) Would Batman-adv be adequate enough to be able
> to handle a 1Gb/s data transmission and be able to swap accordingly to the
> lower frequency radio?

If your radio and CPU are powerful enough, batman-adv is able to handle it, 
yes.

Cheers,
      Simon