From: Marek Lindner <mareklindner@neomailbox.ch>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] [PATCHv15 1/4] batman-adv: Always flood IGMP/MLD reports
Date: Thu, 12 May 2016 23:14:11 +0800 [thread overview]
Message-ID: <2831303.pd8gzeADto@voltaire> (raw)
In-Reply-To: <1462898487-9696-2-git-send-email-linus.luessing@c0d3.blue>
[-- Attachment #1: Type: text/plain, Size: 2775 bytes --]
On Tuesday, May 10, 2016 18:41:24 Linus Lüssing wrote:
> With this patch IGMP or MLD reports are always flooded. This is
> necessary for the upcoming bridge integration to function without
> multicast packet loss.
>
> With the report handling so far bridges might miss interested multicast
> listeners, leading to wrongly excluding ports from multicast packet
> forwarding.
>
> Currently we are treating IGMP/MLD reports, the messages bridges use to
> learn about interested multicast listeners, just as any other multicast
> packet: We try to send them to nodes matching its multicast destination.
>
> Unfortunately, the destination address of reports of the older
> IGMPv2/MLDv1 protocol families do not strictly adhere to their own
> protocol: More precisely, the interested receiver, an IGMPv2 or MLDv1
> querier, itself usually does not listen to the multicast destination
> address of any reports.
>
> Therefore with this patch we are simply excluding IGMP/MLD reports from
> the multicast forwarding code path and keep flooding them. By that
> any bridge receives them and can properly learn about listeners.
>
> To avoid compatibility issues with older nodes not yet implementing this
> report handling, we need to force them to flood reports: We do this by
> bumping the multicast TVLV version to 2, effectively disabling their
> multicast optimization.
>
> Tested-by: Simon Wunderlich <sw@simonwunderlich.de>
> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
> ---
> Makefile | 4 +
> compat-include/linux/igmp.h | 13 ++
> compat-include/linux/skbuff.h | 14 ++
> compat-include/net/addrconf.h | 13 ++
> compat-include/net/ip6_checksum.h | 18 +++
> compat-include/net/ipv6.h | 17 +++
> compat-sources/Makefile | 3 +
> compat-sources/net/core/skbuff.c | 212 +++++++++++++++++++++++++++++
> compat-sources/net/ipv4/igmp.c | 241
> +++++++++++++++++++++++++++++++++ compat-sources/net/ipv6/mcast_snoop.c
> | 216 +++++++++++++++++++++++++++++
> net/batman-adv/Kconfig | 2 +-
> net/batman-adv/multicast.c | 85 ++++++++++--
> 12 files changed, 825 insertions(+), 13 deletions(-)
> create mode 100644 compat-include/linux/igmp.h
> create mode 100644 compat-include/net/addrconf.h
> create mode 100644 compat-include/net/ip6_checksum.h
> create mode 100644 compat-include/net/ipv6.h
> create mode 100644 compat-sources/Makefile
> create mode 100644 compat-sources/net/core/skbuff.c
> create mode 100644 compat-sources/net/ipv4/igmp.c
> create mode 100644 compat-sources/net/ipv6/mcast_snoop.c
Applied in revision 08bf4dc.
Thanks,
Marek
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 473 bytes --]
next prev parent reply other threads:[~2016-05-12 15:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-10 16:41 [B.A.T.M.A.N.] [PATCHv15 0/4] Multicast optimizations for bridges Linus Lüssing
2016-05-10 16:41 ` [B.A.T.M.A.N.] [PATCHv15 1/4] batman-adv: Always flood IGMP/MLD reports Linus Lüssing
2016-05-12 15:14 ` Marek Lindner [this message]
2016-05-10 16:41 ` [B.A.T.M.A.N.] [PATCHv15 2/4] batman-adv: Add multicast optimization support for bridged setups Linus Lüssing
2016-05-12 15:19 ` Marek Lindner
2016-05-10 16:41 ` [B.A.T.M.A.N.] [PATCHv15 3/4] batman-adv: Adding logging of mcast flag changes Linus Lüssing
2016-05-12 15:21 ` Marek Lindner
2016-05-10 16:41 ` [B.A.T.M.A.N.] [PATCHv15 4/4] batman-adv: Add debugfs table for mcast flags Linus Lüssing
2016-05-12 15:22 ` Marek Lindner
2016-05-10 16:50 ` [B.A.T.M.A.N.] [PATCHv15 0/4] Multicast optimizations for bridges Linus Lüssing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2831303.pd8gzeADto@voltaire \
--to=mareklindner@neomailbox.ch \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox