Re: [B.A.T.M.A.N.] 11s mesh mode on openwrt + batman-adv

Sven Eckelmann
2012-11-09T13:15:26Z

[-- Attachment #1: Type: text/plain, Size: 1059 bytes --]

On Friday 09 November 2012 10:41:36 Flavio Leonel wrote:
> hello friends
> come again disturb the lords
>
> - I have a network with openrando opewrt customized by me, here in
> Brazil as jah reported in other emails, but this network is growing and
> am having some difficulties that I can not solve it alone ...
>
> my ath9k driver operates today with 802.11s (mesh) on a virtual
> interface and another interface with 802.11g + n for wifi connections ..
>
> but I'm from the beginning in 2011 fighting with routing in the network ..
>
> AP: (config)
> Attached ...

There is nothing attached.

> eg not know where I really run batman-adv or even whether he really
> works well with HWMP ...

First: IEEE 802.11s (HWMP) and batman-adv are complete different things.
Please don't use batman-adv over HWMP links. And you can check whether you are
using batman-adv on an interface by checking the output of "batctl if". It
should show you all interfaces which are attached at (and therefore known by)
batman-adv (at least for bat0).

Kind regards,
Sven

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]