From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from diktynna.open-mesh.org (diktynna.open-mesh.org [136.243.236.17]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 53869CA5FF0 for ; Tue, 6 Oct 2026 13:06:00 +0000 (UTC) Received: from diktynna.open-mesh.org (localhost [IPv6:::1]) by diktynna.open-mesh.org (Postfix) with ESMTP id 747C381900 for ; Tue, 06 Oct 2026 15:05:58 +0200 (CEST) ARC-Seal: i=2; cv=pass; a=rsa-sha256; d=open-mesh.org; s=20121; t=1791291958; b=ljA3jRdSALMIIh4JpFZ3AimSwXFCyQZ+4aR0X0cl8Sbv2KBje+LqsMvW4mkzoEJpCQU72 cRDsl+BhfoALH9qXOjrQZpebLtV8az466relXnz5Y3dDZ4FFCDEHFStfB33W6DQ07eIcv4H VsOQOrPNJHY1Ya8Nq7RFCDqmYFkmnMk= ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=open-mesh.org; s=20121; t=1791291958; h=from : sender : reply-to : subject : date : message-id : to : cc : mime-version : content-type : content-transfer-encoding : content-id : content-description : resent-date : resent-from : resent-sender : resent-to : resent-cc : resent-message-id : in-reply-to : references : list-id : list-help : list-unsubscribe : list-subscribe : list-post : list-owner : list-archive; bh=leMROTpkwTJLP4gquGwlXc+Y9Mr/ZVFaEnXalX39paE=; b=KlG3LiJQyz8jwSIbhT819k2HDjTX/+hau7ZYC3tbA/heVz8QzaVWH5g/Acd84sImpX5aS 520CPXg1KxzrKVlEmoFyANQxBr5X96wxr11idrG+wecCn1kVVz3eEnpX3CFxNPoEmSvyvT+ eHe31Tv0ZIStDDxqgD8lt2ielZ8TeYY= ARC-Authentication-Results: i=2; open-mesh.org; dkim=pass header.d=narfation.org; arc=pass; dmarc=pass header.from=narfation.org policy.dmarc=none Authentication-Results: open-mesh.org; dkim=pass header.d=narfation.org; arc=pass; dmarc=pass (Used From Domain Record) header.from=narfation.org policy.dmarc=none Received: from dvalin.narfation.org (dvalin.narfation.org [IPv6:2a00:17d8:100::8b1]) by diktynna.open-mesh.org (Postfix) with ESMTPS id D76AB80B92 for ; Tue, 06 Oct 2026 15:05:29 +0200 (CEST) ARC-Seal: i=1; a=rsa-sha256; d=open-mesh.org; s=20121; cv=none; t=1791291940; b=NhawQPozPLDFhL7QBw+SfCgPH+9RTX3aCWasWU1T+XnhQBxF6fDjYdd4/Y8RUr4qDz+0N2 6l2AHfcm7YKa06ZjGxT/PS1mGJRxtXtCZ0GOX7+HLGnULZML7JzEUyS+ACuvxfPwSC+jNk WYandxJWYCdSY0K1Te1v/AmthkKsbQk= ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=open-mesh.org; s=20121; t=1791291939; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: in-reply-to:in-reply-to:references:references:dkim-signature; bh=leMROTpkwTJLP4gquGwlXc+Y9Mr/ZVFaEnXalX39paE=; b=NzNcyupDGJMFln+zNq1gf47QbKXxQ3GpYo7EK+TNYaHtPfFIdz/0i5BKyM6th7k9gHM+ar u0DJ6gNgQbECDk9lgHyAnlRQaVaW6xQ5uCW5/Ey61/1KkAdB16ChX9IyJac3janewlKGdI LLKp9fP7+vMGfYh7TVUCU/V7f+5fVrU= ARC-Authentication-Results: i=1; diktynna.open-mesh.org; dkim=pass header.d=narfation.org header.s=20121 header.b=pOG53iOD; spf=pass (diktynna.open-mesh.org: domain of sven@narfation.org designates 2a00:17d8:100::8b1 as permitted sender) smtp.mailfrom=sven@narfation.org; dmarc=pass (policy=none) header.from=narfation.org Received: by dvalin.narfation.org (Postfix) id 8A05020411; Tue, 06 Oct 2026 13:05:25 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=narfation.org; s=20121; t=1791291925; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version:content-type:content-type: in-reply-to:in-reply-to:references:references; bh=leMROTpkwTJLP4gquGwlXc+Y9Mr/ZVFaEnXalX39paE=; b=pOG53iODMpPMRnZQIsNIS7WPci8nCkm1zav21wIRMWyBhsxOuqFNzrEPjeVhD6Z+vd5aeO fyXuL+K/wwdsGwxJr6Z32B0u0hof9ySoXHUPR1tbsGxtEU0ENc1OdqKzD+uJuJV5Zh2ctF rJh2M4zV9PdZebl5+9gTBeKAmb0Teqg= From: Sven Eckelmann To: Linus =?UTF-8?B?TMO8c3Npbmc=?= Cc: sashiko-reviews@lists.linux.dev, b.a.t.m.a.n@lists.open-mesh.org Subject: Re: [batadv,v13 5/5] batman-adv: avoid superfluous DAT DHT_PUT additions to local DAT Date: Tue, 06 Oct 2026 15:05:22 +0200 Message-ID: <3435112.aeNJFYEL58@sven-l14> In-Reply-To: <20261006121937.398DD1F000FF@smtp.kernel.org> References: <20261006120647.8646-1-linus.luessing@c0d3.blue> <20261006120647.8646-6-linus.luessing@c0d3.blue> <20261006121937.398DD1F000FF@smtp.kernel.org> MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart3441699.44csPzL39Z"; micalg="pgp-sha512"; protocol="application/pgp-signature" Message-ID-Hash: QTXYHBV6YKG7PNYHQTSTPLC57F2BXXGE X-Message-ID-Hash: QTXYHBV6YKG7PNYHQTSTPLC57F2BXXGE X-MailFrom: sven@narfation.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; loop; banned-address; header-match-b.a.t.m.a.n.lists.open-mesh.org-0; header-match-b.a.t.m.a.n.lists.open-mesh.org-1; header-match-b.a.t.m.a.n.lists.open-mesh.org-2; header-match-b.a.t.m.a.n.lists.open-mesh.org-3; emergency; member-moderation; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header X-Mailman-Version: 3.3.10 Precedence: list List-Id: The list for a Better Approach To Mobile Ad-hoc Networking Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: --nextPart3441699.44csPzL39Z Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8"; protected-headers="v1" From: Sven Eckelmann To: Linus =?UTF-8?B?TMO8c3Npbmc=?= Cc: sashiko-reviews@lists.linux.dev, b.a.t.m.a.n@lists.open-mesh.org Date: Tue, 06 Oct 2026 15:05:22 +0200 Message-ID: <3435112.aeNJFYEL58@sven-l14> In-Reply-To: <20261006121937.398DD1F000FF@smtp.kernel.org> MIME-Version: 1.0 On Tuesday, 6 October 2026 14:19:36 CEST sashiko-bot@kernel.org wrote:> > d= iff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c > > index 5cf26e8b3257a..8dd4094d134bd 100644 > > --- a/net/batman-adv/routing.c > > +++ b/net/batman-adv/routing.c > > @@ -1094,7 +1096,8 @@ int batadv_recv_unicast_packet(struct sk_buff *sk= b, > > unicast_4addr_packet =3D > > (struct batadv_unicast_4addr_packet *)skb->data; > > subtype =3D unicast_4addr_packet->subtype; > > - batadv_dat_inc_counter(bat_priv, subtype); > > + flags =3D unicast_4addr_packet->flags; > > + batadv_dat_inc_counter(bat_priv, subtype, flags); >=20 > [Severity: Low] > This passes three arguments to batadv_dat_inc_counter(). However, looking > at net/batman-adv/distributed-arp-table.h, the dummy fallback implementat= ion=20 > of this function used when CONFIG_BATMAN_ADV_DAT is disabled seems to onl= y=20 > accept two arguments: >=20 > static inline void batadv_dat_inc_counter(struct batadv_priv *bat_priv, > u8 subtype) > { > } >=20 > Will this cause a build failure when compiling the kernel with > CONFIG_BATMAN_ADV_DAT=3Dn? Confirmed (+ some extra): Name of failed tests =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D pu =2D- * checkpatch include/uapi/linux/batadv_packet.h * kerneldoc * sparse v5.18 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dy BATMAN= _V=3Dn * sparse v5.19 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMAN= _V=3Dn * sparse v6.0 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dy BATMAN_= V=3Dn * sparse v6.0 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dy BATMAN_= V=3Dn * sparse v6.1.188 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BAT= MAN_V=3Dn * sparse v6.10 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dn BATMAN= _V=3Dn * sparse v6.11 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BATMAN= _V=3Dy * sparse v6.11 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMAN= _V=3Dy * sparse v6.12 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BATMAN= _V=3Dy * sparse v6.12.110 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dn BA= TMAN_V=3Dy * sparse v6.12.110 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BA= TMAN_V=3Dn * sparse v6.12.110 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BA= TMAN_V=3Dy * sparse v6.17 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMAN= _V=3Dn * sparse v6.17 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dy BATMAN= _V=3Dy * sparse v6.18 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMAN= _V=3Dn * sparse v6.18.51 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BAT= MAN_V=3Dn * sparse v6.18.51 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dy BAT= MAN_V=3Dy * sparse v6.2 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BATMAN_= V=3Dn * sparse v6.3 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BATMAN_= V=3Dy * sparse v6.4 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dn BATMAN_= V=3Dy * sparse v6.4 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMAN_= V=3Dn * sparse v6.6 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMAN_= V=3Dy * sparse v6.6 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMAN_= V=3Dy * sparse v6.6.157 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BAT= MAN_V=3Dy * sparse v6.8 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dn BATMAN_= V=3Dn * sparse v6.9 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BATMAN_= V=3Dn * sparse v7.0 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMAN_= V=3Dy * sparse v7.0 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BATMAN_= V=3Dn * sparse v7.1 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMAN_= V=3Dn * sparse v7.2 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMAN_= V=3Dy * sparse v7.2 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BATMAN_= V=3Dn * sparse v7.2.5 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMA= N_V=3Dy * sparse v7.3-rc3 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BAT= MAN_V=3Dn * sparse v7.3-rc3 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dn BAT= MAN_V=3Dy * sparse v7.3-rc3 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BAT= MAN_V=3Dy * unused_symbols v5.18 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3D= y BATMAN_V=3Dn * unused_symbols v5.19 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3D= y BATMAN_V=3Dn * unused_symbols v6.0 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dy= BATMAN_V=3Dn * unused_symbols v6.0 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dy= BATMAN_V=3Dn * unused_symbols v6.1.188 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST= =3Dn BATMAN_V=3Dn * unused_symbols v6.10 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3D= n BATMAN_V=3Dn * unused_symbols v6.11 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3D= y BATMAN_V=3Dy * unused_symbols v6.11 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3D= n BATMAN_V=3Dy * unused_symbols v6.12 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3D= n BATMAN_V=3Dy * unused_symbols v6.12.110 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAS= T=3Dn BATMAN_V=3Dy * unused_symbols v6.12.110 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAS= T=3Dn BATMAN_V=3Dn * unused_symbols v6.12.110 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAS= T=3Dn BATMAN_V=3Dy * unused_symbols v6.17 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3D= n BATMAN_V=3Dn * unused_symbols v6.17 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3D= y BATMAN_V=3Dy * unused_symbols v6.18 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3D= n BATMAN_V=3Dn * unused_symbols v6.18.51 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST= =3Dy BATMAN_V=3Dn * unused_symbols v6.18.51 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST= =3Dy BATMAN_V=3Dy * unused_symbols v6.2 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy= BATMAN_V=3Dn * unused_symbols v6.3 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn= BATMAN_V=3Dy * unused_symbols v6.4 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dn= BATMAN_V=3Dy * unused_symbols v6.4 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy= BATMAN_V=3Dn * unused_symbols v6.6 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy= BATMAN_V=3Dy * unused_symbols v6.6 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn= BATMAN_V=3Dy * unused_symbols v6.6.157 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST= =3Dy BATMAN_V=3Dy * unused_symbols v6.8 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dn= BATMAN_V=3Dn * unused_symbols v6.9 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy= BATMAN_V=3Dn * unused_symbols v7.0 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy= BATMAN_V=3Dy * unused_symbols v7.0 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn= BATMAN_V=3Dn * unused_symbols v7.1 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn= BATMAN_V=3Dn * unused_symbols v7.2 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy= BATMAN_V=3Dy * unused_symbols v7.2 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy= BATMAN_V=3Dn * unused_symbols v7.2.5 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST= =3Dn BATMAN_V=3Dy * unused_symbols v7.3-rc3 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST= =3Dy BATMAN_V=3Dn * unused_symbols v7.3-rc3 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST= =3Dn BATMAN_V=3Dy * unused_symbols v7.3-rc3 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST= =3Dn BATMAN_V=3Dy Output of different failed tests =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D pu: checkpatch include/uapi/linux/batadv_packet.h =2D------------------------------------------------ CHECK: Please don't use multiple blank lines #85: FILE: include/uapi/linux/batadv_packet.h:85: + + =20 total: 0 errors, 0 warnings, 1 checks, 688 lines checked pu: kerneldoc =2D------------ Warning: ./net/batman-adv/distributed-arp-table.c:1032 Excess function = parameter 'hw_dst' description in 'batadv_dat_dht_get_self_reply' (did you = mean one of: 'ip_dst', 'hw_src') Warning: ./net/batman-adv/distributed-arp-table.c:1286 Excess function = parameter 'hw_dst' description in 'batadv_dat_forward_dht_get' (did you mea= n one of: 'ip_dst', 'hw_src') Warning: ./net/batman-adv/distributed-arp-table.c:1032 Excess function = parameter 'hw_dst' description in 'batadv_dat_dht_get_self_reply' (did you = mean one of: 'ip_dst', 'hw_src') Warning: ./net/batman-adv/distributed-arp-table.c:1286 Excess function = parameter 'hw_dst' description in 'batadv_dat_forward_dht_get' (did you mea= n one of: 'ip_dst', 'hw_src') 4 errors pu: sparse v5.18 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dy BATMA= N_V=3Dn =2D--------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:288: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[2]: *** [scripts/Makefile.build:550: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[1]: *** [Makefile:1834: /home/build_test/build_env/tmp.FzAjE3FV2V]= Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v5.19 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMA= N_V=3Dn =2D--------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:249: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[2]: *** [scripts/Makefile.build:466: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[1]: *** [Makefile:1843: /home/build_test/build_env/tmp.FzAjE3FV2V]= Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.0 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dy BATMAN= _V=3Dn =2D-------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:249: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[2]: *** [scripts/Makefile.build:465: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[1]: *** [Makefile:1852: /home/build_test/build_env/tmp.FzAjE3FV2V]= Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.1.188 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BA= TMAN_V=3Dn =2D------------------------------------------------------------------------ /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:250: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[2]: *** [scripts/Makefile.build:503: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[1]: *** [Makefile:2025: /home/build_test/build_env/tmp.FzAjE3FV2V]= Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.10 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dn BATMA= N_V=3Dn =2D--------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:244: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:485: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.10/Makefi= le:1934: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:240: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.11 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BATMA= N_V=3Dy =2D--------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:244: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:485: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.11/Makefi= le:1926: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:224: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.12 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BATMA= N_V=3Dy =2D--------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:229: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:478: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.12/Makefi= le:1936: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:224: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.12.110 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn B= ATMAN_V=3Dy =2D------------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:229: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:466: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.12.110/Ma= kefile:1967: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:224: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.17 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dy BATMA= N_V=3Dy =2D--------------------------------------------------------------------- net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v6.17/script= s/Makefile.build:287: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v6.17/script= s/Makefile.build:556: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v6.17/Makefi= le:2011: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.17/Makefi= le:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.18 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMA= N_V=3Dn =2D--------------------------------------------------------------------- net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v6.18/script= s/Makefile.build:287: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v6.18/script= s/Makefile.build:556: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v6.18/Makefi= le:2010: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.18/Makefi= le:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.18.51 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BA= TMAN_V=3Dn =2D------------------------------------------------------------------------ net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v6.18.51/scr= ipts/Makefile.build:287: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v6.18.51/scr= ipts/Makefile.build:544: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v6.18.51/Mak= efile:2050: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.18.51/Mak= efile:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.2 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BATMAN= _V=3Dn =2D-------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:252: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[2]: *** [scripts/Makefile.build:504: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[1]: *** [Makefile:2021: /home/build_test/build_env/tmp.FzAjE3FV2V]= Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.3 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BATMAN= _V=3Dy =2D-------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:252: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[2]: *** [scripts/Makefile.build:494: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[1]: *** [Makefile:2025: /home/build_test/build_env/tmp.FzAjE3FV2V]= Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.4 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dn BATMAN= _V=3Dy =2D-------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:252: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[2]: *** [scripts/Makefile.build:494: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[1]: *** [Makefile:2026: /home/build_test/build_env/tmp.FzAjE3FV2V]= Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.6 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMAN= _V=3Dy =2D-------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:243: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:480: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.6/Makefil= e:1913: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:234: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.6.157 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BA= TMAN_V=3Dy =2D------------------------------------------------------------------------ /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:243: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:480: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.6.157/Mak= efile:1933: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:234: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.8 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dn BATMAN= _V=3Dn =2D-------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:243: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:481: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.8/Makefil= e:1921: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:240: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v6.9 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BATMAN= _V=3Dn =2D-------------------------------------------------------------------- /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c: In = function =E2=80=98batadv_recv_unicast_packet=E2=80=99: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/routing.c:1100= :25: error: too many arguments to function =E2=80=98batadv_dat_inc_counter= =E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from /home/build_test/build_env/tmp.FzAjE3FV2V/net/bat= man-adv/routing.c:30: /home/build_test/build_env/tmp.FzAjE3FV2V/net/batman-adv/distributed-ar= p-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[4]: *** [scripts/Makefile.build:244: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv/routing.o] Error 1 make[3]: *** [scripts/Makefile.build:485: /home/build_test/build_env/tm= p.FzAjE3FV2V/net/batman-adv] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v6.9/Makefil= e:1919: /home/build_test/build_env/tmp.FzAjE3FV2V] Error 2 make[1]: *** [Makefile:240: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v7.0 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3Dn BATMAN= _V=3Dn =2D-------------------------------------------------------------------- net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v7.0/scripts= /Makefile.build:289: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v7.0/scripts= /Makefile.build:548: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v7.0/Makefil= e:2105: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v7.0/Makefil= e:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v7.1 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATMAN= _V=3Dn =2D-------------------------------------------------------------------- net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v7.1/scripts= /Makefile.build:289: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v7.1/scripts= /Makefile.build:548: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v7.1/Makefil= e:2144: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v7.1/Makefil= e:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v7.2 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3Dy BATMAN= _V=3Dy =2D-------------------------------------------------------------------- net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v7.2/scripts= /Makefile.build:289: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v7.2/scripts= /Makefile.build:549: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v7.2/Makefil= e:2187: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v7.2/Makefil= e:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v7.2.5 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST=3Dn BATM= AN_V=3Dy =2D---------------------------------------------------------------------- net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v7.2.5/scrip= ts/Makefile.build:289: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v7.2.5/scrip= ts/Makefile.build:550: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v7.2.5/Makef= ile:2198: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v7.2.5/Makef= ile:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: sparse v7.3-rc3 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST=3Dy BA= TMAN_V=3Dn =2D------------------------------------------------------------------------ net/batman-adv/routing.c: In function =E2=80=98batadv_recv_unicast_pack= et=E2=80=99: net/batman-adv/routing.c:1100:25: error: too many arguments to function= =E2=80=98batadv_dat_inc_counter=E2=80=99 1100 | batadv_dat_inc_counter(bat_priv, subtyp= e, flags); | ^~~~~~~~~~~~~~~~~~~~~~ In file included from net/batman-adv/routing.c:30: net/batman-adv/distributed-arp-table.h:197:20: note: declared here 197 | static inline void batadv_dat_inc_counter(struct batadv_priv *b= at_priv, | ^~~~~~~~~~~~~~~~~~~~~~ make[5]: *** [/home/build_test/build_env/linux-build/linux/v7.3-rc3/scr= ipts/Makefile.build:290: net/batman-adv/routing.o] Error 1 make[4]: *** [/home/build_test/build_env/linux-build/linux/v7.3-rc3/scr= ipts/Makefile.build:551: net/batman-adv] Error 2 make[3]: *** [/home/build_test/build_env/linux-build/linux/v7.3-rc3/Mak= efile:2229: .] Error 2 make[2]: *** [/home/build_test/build_env/linux-build/linux/v7.3-rc3/Mak= efile:248: __sub-make] Error 2 make[1]: *** [Makefile:248: __sub-make] Error 2 make: *** [Makefile:65: all] Error 2 pu: unused_symbols v6.0 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST=3D= y BATMAN_V=3Dn =2D------------------------------------------------------------------------= =2D- batadv_bla_check_bcast_duplist batadv_bla_is_backbone_gw batadv_frag_send_packet batadv_frag_skb_buffer batadv_frag_skb_fwd batadv_gw_get_selected_orig batadv_hardif_no_broadcast batadv_interface_rx batadv_netdev_get_wifi_flags batadv_netlink_tpmeter_notify batadv_orig_node_vlan_get batadv_orig_node_vlan_new batadv_orig_node_vlan_release batadv_skb_head_push pu: unused_symbols v6.10 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST= =3Dn BATMAN_V=3Dn =2D------------------------------------------------------------------------= =2D- batadv_frag_send_packet batadv_frag_skb_buffer batadv_frag_skb_fwd batadv_gw_get_selected_orig batadv_hardif_no_broadcast batadv_interface_rx batadv_is_my_mac batadv_netdev_get_wifi_flags batadv_netlink_tpmeter_notify batadv_orig_node_vlan_get batadv_orig_node_vlan_new batadv_orig_node_vlan_release batadv_skb_head_push pu: unused_symbols v6.11 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAST= =3Dy BATMAN_V=3Dy =2D------------------------------------------------------------------------= =2D- batadv_frag_send_packet batadv_frag_skb_buffer batadv_frag_skb_fwd batadv_gw_get_selected_orig batadv_interface_rx batadv_netdev_get_wifi_flags batadv_netlink_tpmeter_notify batadv_orig_node_vlan_get batadv_orig_node_vlan_new batadv_orig_node_vlan_release batadv_skb_head_push pu: unused_symbols v6.17 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dy MCAST= =3Dy BATMAN_V=3Dy =2D------------------------------------------------------------------------= =2D- batadv_bla_check_bcast_duplist batadv_bla_is_backbone_gw batadv_frag_send_packet batadv_frag_skb_buffer batadv_frag_skb_fwd batadv_gw_get_selected_orig batadv_interface_rx batadv_netdev_get_wifi_flags batadv_netlink_tpmeter_notify batadv_orig_node_vlan_get batadv_orig_node_vlan_new batadv_orig_node_vlan_release batadv_skb_head_push pu: unused_symbols v6.8 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dn TRACING=3Dn MCAST=3D= n BATMAN_V=3Dn =2D------------------------------------------------------------------------= =2D- batadv_bla_check_bcast_duplist batadv_bla_is_backbone_gw batadv_bla_is_backbone_gw_orig batadv_frag_send_packet batadv_frag_skb_buffer batadv_frag_skb_fwd batadv_gw_get_selected_orig batadv_hardif_no_broadcast batadv_interface_rx batadv_is_my_mac batadv_netdev_get_wifi_flags batadv_netlink_tpmeter_notify batadv_orig_node_vlan_get batadv_orig_node_vlan_new batadv_orig_node_vlan_release batadv_skb_head_push pu: unused_symbols v7.2.5 cfg: BLA=3Dy DAT=3Dn DEBUG=3Dy TRACING=3Dn MCAST= =3Dn BATMAN_V=3Dy =2D------------------------------------------------------------------------= =2D- batadv_bla_check_bcast_duplist batadv_bla_is_backbone_gw batadv_bla_is_backbone_gw_orig batadv_frag_send_packet batadv_frag_skb_buffer batadv_frag_skb_fwd batadv_gw_get_selected_orig batadv_interface_rx batadv_netdev_get_wifi_flags batadv_netlink_tpmeter_notify batadv_orig_node_vlan_get batadv_orig_node_vlan_new batadv_orig_node_vlan_release batadv_skb_head_push pu: unused_symbols v7.3-rc3 cfg: BLA=3Dn DAT=3Dn DEBUG=3Dn TRACING=3Dy MCAS= T=3Dy BATMAN_V=3Dn =2D------------------------------------------------------------------------= =2D- batadv_frag_send_packet batadv_frag_skb_buffer batadv_frag_skb_fwd batadv_gw_get_selected_orig batadv_hardif_no_broadcast batadv_interface_rx batadv_netdev_get_wifi_flags batadv_netlink_tpmeter_notify batadv_orig_node_vlan_get batadv_orig_node_vlan_new batadv_orig_node_vlan_release batadv_skb_head_push --nextPart3441699.44csPzL39Z Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part. Content-Transfer-Encoding: 7Bit -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQS81G/PswftH/OW8cVND3cr0xT1ywUCasTyEgAKCRBND3cr0xT1 y1GcAP9hBU7w6GeFcgUCtLKhk+fFvaBxrauWYZFINQs7qWDF+gD/eGtnKFTwfiTF 4o6iS6Nx6yDjpPX7EUUCpLtJY+8BKQ8= =zO+Q -----END PGP SIGNATURE----- --nextPart3441699.44csPzL39Z--