From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <468DEE47.6080106@fokus.fraunhofer.de> Date: Fri, 06 Jul 2007 09:24:55 +0200 From: Anton Gillert MIME-Version: 1.0 References: <200707051000.l65A02Y3020074@open-mesh.net> In-Reply-To: <200707051000.l65A02Y3020074@open-mesh.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: [B.A.T.M.A.N.] Re: Batman problem with tun0 Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@open-mesh.net > Hi, > > >> I have two Asus wl500gp router, each with atheros(Atheros 5212) >> wlancards, running kamikaze 7.06; kernel ver.:2.6.19.2. and B.A.T.M.A.N. >> 0.2 rv451 (compability version 3) >> one of them has access to the internet. >> The one who has no internet connection, doesn't set a default route to >> the one who has. It only sets this routes: >> > > it looks quite good so far. Blocked TCP is the most obvious reason that the > tun device does not appear. the client tries to establish a TCP control > channel (port 1967) to the gateway. If that connection attempt is ignored no > default route will be set. > > Regards, > Marek > > Hello, thanks for replying so fast. Unfortunately the reason isn't the blocked tcp-port, I tested it after I shutdown the firewall on each node with the same result as you can see above. Is there something else I can do? Best regards Anton