[B.A.T.M.A.N.] problem starting batmand (v799)

[rene <batman@absorb.it>]

Hi,

starting batmand, the daemon sometimes doesn't seem to recognize the
network the right way.


root@25:~# killall batmand
root@25:~# batmand eth1:1 vlan0:1
Using interface eth1:1 with address 192.168.42.25 and broadcast address
192.168.43.255
Using interface vlan0:1 with address 192.168.42.25 and broadcast address
192.168.43.255
-------------------------------------------------------
 This is a tcpdump from a neighbor node:

root@ap14:~# tcpdump -i eth0 src 192.168.42.25
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
05:12:09.512310 arp who-has 192.168.43.255 tell 192.168.42.25
05:12:10.512178 arp who-has 192.168.43.255 tell 192.168.42.25
05:12:11.699795 arp who-has 192.168.43.255 tell 192.168.42.25

-------------------------------------------
on the other node:
root@25:~# killall batmand
root@25:~# batmand eth1:1 vlan0:1
Using interface eth1:1 with address 192.168.42.25 and broadcast address
192.168.43.255
Using interface vlan0:1 with address 192.168.42.25 and broadcast address
192.168.43.255
root@25:~#

----------------------------------------------
tcpdump:

05:12:28.621940 IP 192.168.42.25.4305 > 192.168.43.255.4305: UDP, length 20
05:12:28.873246 IP 192.168.42.25.4305 > 192.168.43.255.4305: UDP, length 25
05:12:28.892343 IP 192.168.42.25.4305 > 192.168.43.255.4305: UDP, length 15


now batmand is running successfully.

Any Ideas?

regards,
Rene