Re: [B.A.T.M.A.N.] problem starting batmand (v799)

[rene <batman@absorb.it>]

Hi,

Axel Neumann wrote:
> Hi,
> 
> On Dienstag 20 November 2007, rene wrote:
>> Hi,
>>
>> starting batmand, the daemon sometimes doesn't seem to recognize the
>> network the right way.
>>
>>
>> root@25:~# killall batmand
>> root@25:~# batmand eth1:1 vlan0:1
>> Using interface eth1:1 with address 192.168.42.25 and broadcast address
>> 192.168.43.255
>> Using interface vlan0:1 with address 192.168.42.25 and broadcast address
>> 192.168.43.255
> 
>> -------------------------------------------
>> on the other node:
>> root@25:~# killall batmand
>> root@25:~# batmand eth1:1 vlan0:1
>> Using interface eth1:1 with address 192.168.42.25 and broadcast address
>> 192.168.43.255
>> Using interface vlan0:1 with address 192.168.42.25 and broadcast address
>> 192.168.43.255
>> root@25:~#
>>
> 
> What is definitively not correct is that your capture indicates 4 times the 
> same IP address (192.168.42.25) on 4 different interfaces. 
This is two times the same node, first time it recognizes the broadcast
the right way, second time not.

> There MUST be a different IP address for each BATMAN interface in the network 
> (also if a single BATMAN node has more than one interface). 
Is this implemented like this (where?)? Can't work BATMAN with the
interfaces (or can't we change it to work this way), it would make the
whole configuration much easier to assign to every node only one single
IP address (or two, one for olsr and ne for BATMAN)? We are doing this
with olsr and this really makes the network-structure much cleaner -
every node has one IP.

Is the described problem with the misconfigured broadcast related to the
'same IP on different interfaces' issue?

regards,
Rene