From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <4958C917.7060803@reglue.org> Date: Mon, 29 Dec 2008 06:56:55 -0600 From: Don Davis MIME-Version: 1.0 Subject: Re: [B.A.T.M.A.N.] Some questions to BATMAN References: <1396672497@web.de> In-Reply-To: <1396672497@web.de> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: The list for a Better Approach To Mobile Ad-hoc Networking > 1) > I will build a mesh network.. One of my router is connected to my server with the IP 129.211.186.12. I can't make > a traceroute through my router to this server. If I try to make "traceroute 129.211.186.12" from an another router I get the message: > "PING 129.211.186.12 (129.211.186.12): 56 data bytes > ping: sendto: Network is unreachable router Server (129.211.186.12) (batman eth0) <------------------> (batman some wireless device) On the router, which firmware are you running with Batman? When you type batmand -c -d 1 on the router /server what do you see? What does batmand -v show on the router / server? > I can send ping requests from my server to the router and from the router to the server, but as I said, I can't make a traceroute to the server > from an another router. My question is, how can I do this ? > > In OLSR it was not a problem to trace the server through the router. Should I change something in HNA messages ? > > 2) > I read the HowTO from Freifunk Leipzig about the configuration of BATMAN, look here http://wiki.leipzig.freifunk.net/BATMAN. How is the configuration > If I want to run BATMAN in Ubuntu Intrepid? How can I configure the IPTABLES ? > For newer batman and experimental you'll want to open up ports 4305-4307: iptables -t filter -I INPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT iptables -t filter -I INPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT iptables -t filter -I INPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT iptables -t filter -I OUTPUT 2 -p udp --dport 4305 --sport 4305 -j ACCEPT iptables -t filter -I OUTPUT 2 -p udp --dport 4306 --sport 4306 -j ACCEPT iptables -t filter -I OUTPUT 2 -p udp --dport 4307 --sport 4307 -j ACCEPT