Re: [B.A.T.M.A.N.] Wireless Bridge

[Tom Cannon <tcannon@generalpacket.com>]

It is unlikely your dsl modem can run any mesh protocol.  (The Open-Mesh 
OM1P runs "Robin", which uses olsr)

However, if you have the Open-Mesh OM1P device, you can reflash it with 
OpenWrt and turn it into a WDS repeater, assuming your dsl modem 
supports this.

Your best source of information on robin and OM1P is here: 
http://robin.forumup.it/

OM1P as a generic AP is discussed here: 
http://robin.forumup.it/about1534-robin.html

If you have the newer Open-Mesh MR500, you are out of luck.  That 
firmware is not open-source.



On 3/15/2011 11:19 AM, A. AlBoori wrote:
> Thank You for your reply. Yes however it runs B.A.T.M.A.N mesh
> protocol.  I wonder. is it possible to do it?
>
> If yes, what configuration/commands i have to do?
>
> Regards,
>
> On 15 March 2011 21:11, Sven Eckelmann<sven@narfation.org>  wrote:
>> On Tuesday 15 March 2011 18:58:16 A. AlBoori wrote:
>>> Good Day all,
>>> I have Wireless DSL router and  Open Mesh Router.
>> Open Mesh router == a router from open-mesh.com? We are not related to
>> open-mesh.com
>>
>> Kind regards,
>>         Sven
>>