Re: [B.A.T.M.A.N.] batman-adv vis_data

[wayne <plettpc@gmail.com>]

On 21/04/2011 19:47, Gioacchino Mazzurco wrote:
>> you didn't add
>> your bridge interface to batman, did you?
>
> Yes on Marek suggestion i done
> batctl if add br-clients
>
> instead of
> batctl if add eth0
>
> br-clients = bat0 + eth0 [ + ath0 eventually ]
>

Hi All

Firstly I want to thank all the devs here for the excellent work! I have 
recently upgraded all my Nodes here in Rural S.Africa as per VT project 
to B-ADV and it just works.

To Reply on setup question.

here is mine!
interfaces: eth0, wifi0( ath0,ath1)  UBNT unit.

root@MP-20:/etc/config# brctl show
bridge name	bridge id		STP enabled	interfaces
br-lan		8000.00094557a8e5	yes		eth0
							bat0
							ath1

root@MP-20:/etc/config# batctl if
ath0: active

As bat0 is already bridged with the other interfaces, it's only required 
to run Bat-adv on the mesh interface i.e ath0.
VAP: ath1 is used as a AP also link-local,with pppoe server all 
clients,node bridge ip's all static.

Wayne A