Hi,

On 12-06-21 04:28 AM, Marek Lindner wrote:
> Hi,
>
>> I talked to marec last week on irc (I'm tahini).  I have a linksys
>> router that runs batman on the eth0 interface and other routers or
>> laptops are connected to it.  Problem is, even though the batman packets
>> pass from the other machines to the linksys, it seems something weird
>> happens on the linksys and the interface is not recognized as a batman
>> neighbor.
> the problem is that leon does not receive any packets from its neighbors. Its
> log only repeatedly states "Sending own packet" but no information about
> incoming packets is printed. If you compare it with the other logs you will
> see what I mean.
But doesn't the 'batctl td eth0' output show it receives the packets 
from the neighbors?  What happens to those packets?

> A common mistake leading to this symptom is a bridge misconfiguration. Is eth0
> on leon part of a bridge ?
No, the bat0 interface is on the bridge, but eth0 is a vlan, I think.  
Maybe it is a vlan misconfiguration?
Attached are some outputs and config files from leon.  What other 
commands should I look for to help find the problem?

Thanks,
Geneviève