From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] [PATCH] batman-adv: Fix broadcast packet CRC calculation
Date: Wed, 17 Oct 2012 15:51:38 +0200 [thread overview]
Message-ID: <5043296.Tdbbob6tg4@bentobox> (raw)
In-Reply-To: <13645415.zRDBnAsdL4@bentobox>
[-- Attachment #1: Type: text/plain, Size: 3476 bytes --]
On Wednesday 17 October 2012 15:50:50 Sven Eckelmann wrote:
> On Wednesday 17 October 2012 13:38:30 Linus Lüssing wrote:
> > So far the crc16 checksum for a batman-adv broadcast data packet, received
> > on a batman-adv hard interface, was calculated over zero bytes of its
> > content leading to many incoming broadcast data packets wrongly being
> > dropped.
> >
> > This patch fixes this issue by calculating the crc16 over the actual,
> > complete broadcast payload.
> >
> > The issue is a regrission introduced by
> > e5cf86d30a9b32feccb6b866a3f23b0e0483a3b0.
> >
> > Signed-off-by: Linus Lüssing <linus.luessing@web.de>
> > ---
> > It led to about 60-80% broadcast packet loss to a direct neighbor
> > with a ping6 with a 1s interval in our scenario, but about no
> > packet loss with an interval smaller than 0.2s.
> >
> > Also see: https://projects.universe-factory.net/issues/65 (German)
> >
> > bridge_loop_avoidance.c | 8 ++++----
> > routing.c | 8 +++++++-
> > 2 files changed, 11 insertions(+), 5 deletions(-)
> >
> > diff --git a/bridge_loop_avoidance.c b/bridge_loop_avoidance.c
> > index 6705d35..e7b5777 100644
> > --- a/bridge_loop_avoidance.c
> > +++ b/bridge_loop_avoidance.c
> > @@ -1205,8 +1205,8 @@ int batadv_bla_init(struct batadv_priv *bat_priv)
> >
> > /**
> >
> > * batadv_bla_check_bcast_duplist
> > * @bat_priv: the bat priv with all the soft interface information
> >
> > - * @bcast_packet: originator mac address
> > - * @hdr_size: maximum length of the frame
> > + * @bcast_packet: encapsulated broadcast frame plus batman header
> > + * @bcast_packet_len: length of encapsulated broadcast frame plus batman
> > header *
> >
> > * check if it is on our broadcast list. Another gateway might
> > * have sent the same packet because it is connected to the same
> > backbone,
> >
> > @@ -1219,14 +1219,14 @@ int batadv_bla_init(struct batadv_priv *bat_priv)
> >
> > */
> >
> > int batadv_bla_check_bcast_duplist(struct batadv_priv *bat_priv,
> >
> > struct batadv_bcast_packet *bcast_packet,
> >
> > - int hdr_size)
> > + int bcast_packet_len)
> >
> > {
> >
> > int i, length, curr;
> > uint8_t *content;
> > uint16_t crc;
> > struct batadv_bcast_duplist_entry *entry;
> >
> > - length = hdr_size - sizeof(*bcast_packet);
> > + length = bcast_packet_len - sizeof(*bcast_packet);
> >
> > content = (uint8_t *)bcast_packet;
> > content += sizeof(*bcast_packet);
> >
> > diff --git a/routing.c b/routing.c
> > index bc2b88b..f861b7c 100644
> > --- a/routing.c
> > +++ b/routing.c
> > @@ -1136,8 +1136,14 @@ int batadv_recv_bcast_packet(struct sk_buff *skb,
> >
> > spin_unlock_bh(&orig_node->bcast_seqno_lock);
> >
> > + /* keep skb linear for crc calculation */
> > + if (skb_linearize(skb) < 0)
> > + goto out;
> > +
> > + bcast_packet = (struct batadv_bcast_packet *)skb->data;
> > +
> >
> > /* check whether this has been sent by another originator before */
> >
> > - if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, hdr_size))
> > + if (batadv_bla_check_bcast_duplist(bat_priv, bcast_packet, skb->len))
> >
> > goto out;
> >
> > /* rebroadcast packet */
>
> Btw. why should renaming the hdr_size to bcast_packet_len help to get a
> different value than 0?
Ok, Marek just noticed the skb->len :D
> Kind regards,
> Sven
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
prev parent reply other threads:[~2012-10-17 13:51 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-17 11:38 [B.A.T.M.A.N.] [PATCH] batman-adv: Fix broadcast packet CRC calculation Linus Lüssing
2012-10-17 11:56 ` Antonio Quartulli
2012-10-20 4:18 ` Gui Iribarren
2012-10-17 13:32 ` Sven Eckelmann
2012-10-17 13:50 ` Sven Eckelmann
2012-10-17 13:51 ` Sven Eckelmann [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5043296.Tdbbob6tg4@bentobox \
--to=sven@narfation.org \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox