From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <50E9FAD0.8000004@futurec.net> Date: Sun, 06 Jan 2013 14:29:36 -0800 From: Ray Gibson MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Subject: [B.A.T.M.A.N.] wpa-none through openwrt config Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: The list for a Better Approach To Mobile Ad-hoc Networking Hello, I'm trying to get wpa-none happy on my bullet m5's running batman-adv (aa-rc1 with batman-adv 2012.3.0). I can make it work by running wpa_supplicant manually with the correct options but am interested in having it work through the uci config files. Is this possible? The wpa_supplicant.sh script seems to want to force wpa-psk with any options that force wpa_supplicant, which generate a relatively useless supplicant config file for ibss. This also makes wlan0 get the default 1500 MTU. Here's my "semi-working" wpa_supplicant.conf file, after I increase the MTU then batman talks properly and sees the other node. semi-working because even though batctl o sees the other node it can't ping it unless the psk is commented out.. :-\ ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 eapol_version=1 ap_scan=2 fast_reauth=1 #IBSS/ad-hoc mode with WPA2/AES encryption network={ ssid="batmesh" bssid=20:aa:bb:cc:dd:ee mode=1 scan_ssid=1 frequency=5765 fixed_freq=1 mcast_rate=18 htmode=HT20 proto=WPA key_mgmt=WPA-NONE pairwise=NONE group=CCMP psk="xxxxxxxx" } Thanks for any ideas. -- Ray Gibson Future Concepts IS Inc. 909-593-6705 x2096 This communication constitutes an electronic communication within the meaning of the Electronic Communications Privacy Act, 18 USC 2510, and its disclosure is strictly limited to the recipient intended by the sender of this message. This e-mail and any files transmitted with it are proprietary and intended for the sole use of the individual or entity to whom they are addressed. They are not to be viewed, shared, copied or forwarded, regardless to whom, without the expressed permission of Future Concepts I.S., Inc. If you have received this e-mail in error, please notify the sender and immediately delete it from your system. Thank you.