From: cmsv <cmsv@wirelesspt.net>
To: Antonio Quartulli <ordex@autistici.org>
Cc: The list for a Better Approach To Mobile Ad-hoc Networking
<b.a.t.m.a.n@lists.open-mesh.org>,
OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: Re: [B.A.T.M.A.N.] [OpenWrt-Devel] Kernel panic & Process batadv.sh - Fatal
Date: Fri, 16 Aug 2013 20:24:59 -0400 [thread overview]
Message-ID: <520EC2DB.4040701@wirelesspt.net> (raw)
In-Reply-To: <20130814103306.GO849@ritirata.org>
[-- Attachment #1.1: Type: text/plain, Size: 3646 bytes --]
Although things seem to be working i still see some warnings when
restarting the wifi; that might be relevant:
# wifi
command failed: Device or resource busy (-16)
Configuration file: /var/run/hostapd-phy0.conf
[ 1086.410000] device wlan0 entered promiscuous mode
Using interface [ 1086.430000] br-lan: port 2(wlan0) entered forwarding
state
wlan0 with hwadd[ 1086.430000] br-lan: port 2(wlan0) entered forwarding
state
r 00:22:b0:d2:61:0b and ssid "test.net"
[ 1088.430000] br-lan: port 2(wlan0) entered forwarding state
Successfully initialized wpa_supplicant
[ 1090.690000] ------------[ cut here ]------------
[ 1090.700000] WARNING: at
/home/cmsv/attitude_adjustment/build_dir/linux-ar71xx_generic/compat-wireless-2013-06-27/net/mac80211/chan.c:218
0x80ca631c()
[ 1090.710000] Modules linked in: ath79_wdt ledtrig_timer ledtrig_netdev
batman_adv(O) nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp
ipt_MASQUERADE iptable_nat nf_nat xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit
iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ath9k(O)
ath9k_common(O) ath9k_hw(O) ath(O) mac80211(O) nls_base libcrc32c crc16
cfg80211(O) compat(O) arc4 aes_generic crc32c crypto_hash crypto_algapi
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[ 1090.760000] Call Trace:[<8027b518>] 0x8027b518
[ 1090.770000] [<8027b518>] 0x8027b518
[ 1090.770000] [<80071a8c>] 0x80071a8c
[ 1090.770000] [<80ca631c>] 0x80ca631c
[ 1090.780000] [<80071ad0>] 0x80071ad0
[ 1090.780000] [<80ca631c>] 0x80ca631c
[ 1090.790000] [<80ca6814>] 0x80ca6814
[ 1090.790000] [<80ca1da4>] 0x80ca1da4
[ 1090.790000] [<80ce376c>] 0x80ce376c
[ 1090.800000] [<80ca6d5c>] 0x80ca6d5c
[ 1090.800000] [<80c95b24>] 0x80c95b24
[ 1090.800000] [<80c1f958>] 0x80c1f958
[ 1090.810000] [<8020b5dc>] 0x8020b5dc
[ 1090.810000] [<801f9080>] 0x801f9080
[ 1090.810000] [<8020b410>] 0x8020b410
[ 1090.820000] [<8020a9ec>] 0x8020a9ec
[ 1090.820000] [<8020b400>] 0x8020b400
[ 1090.820000] [<8020a344>] 0x8020a344
[ 1090.830000] [<801e05ac>] 0x801e05ac
[ 1090.830000] [<8020a730>] 0x8020a730
[ 1090.830000] [<8025eaac>] 0x8025eaac
[ 1090.840000] [<801e12fc>] 0x801e12fc
[ 1090.840000] [<801d7cb4>] 0x801d7cb4
[ 1090.840000] [<801e4860>] 0x801e4860
[ 1090.850000] [<8025e690>] 0x8025e690
[ 1090.850000] [<80094804>] 0x80094804
[ 1090.860000] [<80092214>] 0x80092214
[ 1090.860000] [<800c2b1c>] 0x800c2b1c
[ 1090.860000] [<801e392c>] 0x801e392c
[ 1090.870000] [<801d8cf0>] 0x801d8cf0
[ 1090.870000] [<800c557c>] 0x800c557c
[ 1090.870000] [<800c59d4>] 0x800c59d4
[ 1090.880000] [<8006c0c4>] 0x8006c0c4
[ 1090.880000] [<800e91e0>] 0x800e91e0
[ 1090.880000] [<800e96f4>] 0x800e96f4
[ 1090.890000] [<801da5cc>] 0x801da5cc
[ 1090.890000] [<80096ae0>] 0x80096ae0
[ 1090.890000] [<800e9f78>] 0x800e9f78
[ 1090.900000] [<800d70a4>] 0x800d70a4
[ 1090.900000] [<8006a284>] 0x8006a284
[ 1090.900000]
[ 1090.910000] ---[ end trace c98f8801474471e6 ]---
On 08/14/2013 06:33 AM, Antonio Quartulli wrote:
> On Tue, Aug 13, 2013 at 10:48:15PM -0400, cmsv wrote:
>> The problem has now been solved with the needed patch that was
>> backported to AA. It is now available in r37768 and the images with
>> batman-adv are not affected by this problem.
>>
>> Patch is at: target/linux/generic/patches-3.3/721-phy_packets.patch
>
> Just to clarify: this patch existed before and the backported fix is
> "changing the patch" to avoid the crash :-)
>
> Thanks for raising the issue!
>
> Cheers,
>
[-- Attachment #1.2: 0x782BF73E.asc --]
[-- Type: application/pgp-keys, Size: 36799 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]
prev parent reply other threads:[~2013-08-17 0:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-13 0:43 [B.A.T.M.A.N.] Kernel panic & Process batadv.sh - Fatal cmsv
2013-08-13 0:59 ` [B.A.T.M.A.N.] [OpenWrt-Devel] " Gui Iribarren
2013-08-14 2:48 ` cmsv
2013-08-14 10:33 ` Antonio Quartulli
2013-08-17 0:24 ` cmsv [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=520EC2DB.4040701@wirelesspt.net \
--to=cmsv@wirelesspt.net \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=openwrt-devel@lists.openwrt.org \
--cc=ordex@autistici.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox