inline

On 02/12/2014 02:23 AM, Antonio Quartulli wrote:
> On 08/02/14 04:08, cmsv wrote:
>> [  239.420000] [<8020ff04>] 0x8020ff04
>> [  239.420000] [<801d8154>] 0x801d8154
>> [  239.420000] [<80211184>] 0x80211184
>> [  239.420000] [<800d8890>] 0x800d8890
>> [  239.420000] [<800ec6f0>] 0x800ec6f0
>> [  239.420000] [<801d9f58>] 0x801d9f58
>> [  239.420000] [<801d93dc>] 0x801d93dc
>> [  239.420000] [<800d9114>] 0x800d9114
>> [  239.420000] [<800d93dc>] 0x800d93dc
>> [  239.420000] [<801d9a70>] 0x801d9a70
>> [  239.420000] [<8006a284>] 0x8006a284
>> [  239.420000]
>> [  239.420000]
>> [  239.420000] Code: 0c3a9ac3  00402821  0040a821 <8c42000c> 54400052
>> 00008021  8e050054  10a00005  8fb10010
>> [  239.730000] ---[ end trace 7d873dc004108502 ]---
>> [  239.740000] Kernel panic - not syncing: Fatal exception in interrupt
>> [  239.740000] Rebooting in 3 seconds..
>>
> 
> 
> Hi!
> 
> Have you been able to run a test with kernel symbols enabled??
> That would be a great help ;)

I have tried to compile images with with kernel symbols enabled; but no
matter how much i trim/strip down the build to non essencial features; i
am unable to create images that fit in 4 mb flash for the routers i have
which are mostly dlink routers.
Along with shortage of time that i have at the moment i will have to
postpone this testing for later and stick with batman-adv 2013.4.0 for
now since 2014 is not providing me the same stability.

Last night i tried 2014 again and changed the router that was going to
be the gateway and noticed that the reboot was only happening in 1
router instead of 2.
Replicating is easy as long as i make the gateway disappear in some way.

> 
> Cheers,
>