Re: [B.A.T.M.A.N.] batman-adv: memory leak?

[cmsv <cmsv@wirelesspt.net>]

[-- Attachment #1.1: Type: text/plain, Size: 1532 bytes --]

I have noticed a few patches being sent but unless i missing something
they are all for the development branch.
Next week i will be deploying new firmware and create new access points
and cannot afford "testing" on production environment.
I will be returning to the 2014 branch later on after my trip and will
try to debug the issue once and for all which by then i will report my
findings.

On 02/12/2014 06:41 AM, Antonio Quartulli wrote:
> On 12/02/14 11:40, cmsv wrote:
>>>
>>>
>>> Hi!
>>>
>>> Have you been able to run a test with kernel symbols enabled??
>>> That would be a great help ;)
>>
>> I have tried to compile images with with kernel symbols enabled; but no
>> matter how much i trim/strip down the build to non essencial features; i
>> am unable to create images that fit in 4 mb flash for the routers i have
>> which are mostly dlink routers.
>> Along with shortage of time that i have at the moment i will have to
>> postpone this testing for later and stick with batman-adv 2013.4.0 for
>> now since 2014 is not providing me the same stability.
>>
>> Last night i tried 2014 again and changed the router that was going to
>> be the gateway and noticed that the reboot was only happening in 1
>> router instead of 2.
>> Replicating is easy as long as i make the gateway disappear in some way.
> 
> You should perform the same test now with the new patches that I just
> sent to the ml.
> 
> Maybe your problem was a merely consequence of the bug we just fixed.
> 
> Cheers,
> 

[-- Attachment #1.2: 0x15C4B382.asc --]
[-- Type: application/pgp-keys, Size: 36799 bytes --]

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 901 bytes --]