From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <53889421.7040000@udio.cujae.edu.cu> Date: Fri, 30 May 2014 10:22:25 -0400 From: Lucy Coya MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1"; format="flowed" Content-Transfer-Encoding: quoted-printable Subject: [B.A.T.M.A.N.] I need some help with BATMAN configuration Reply-To: The list for a Better Approach To Mobile Ad-hoc Networking List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: b.a.t.m.a.n@lists.open-mesh.org Hi everyone, My name is Lucy Coya, I=B4m a telecommunications engineer and I need some=20 help with my BATMAN configuration. I=B4m using batman-adv-2014-2.0 and=20 batctl-2014-2.0 I=B4m trying to use BATMAN protocol in a very very simple routing scenario = at first to study the protocol. I have: -Two Laptops using two wireless interfaces each (wlan0 in AP mode and=20 wlan1 in Ad Hoc mode). I meshed the two wireless interfaces in ad hoc mode according to the=20 wiki steps and it worked fine,so I can ping the interfaces. Now I=B4m=20 trying to make that two clients connected to the AP interfaces can ping=20 each other through the mesh network. I tried creating a bridge between=20 wlan0 and wlan1 as the wiki says but no ping :-(. I don=B4t know what to=20 do so any help would be awesome!!! Thanks Sorry if my English is bad :-) Lucy 50 Aniversario de la Cujae. Inaugurada por Fidel el 2 de diciembre de 1964 = http://cujae.edu.cu