[B.A.T.M.A.N.] question about batman-adv auto run

[B.A.T.M.A.N.] question about batman-adv auto run

[michael.holcman1]

Hello,
Do you know how to auto run batman-adv, because, i have no answer where i write:/etc/init.d enable ?

Where i can located the configure fils as following ?


config 'mesh' 'bat0'
	option 'interface' 'wlan0' 'bride'
	option 'aggregated_ogms'
	option 'ap_isolation'
	option 'bonding'
	option 'fragmentation'
	option 'gw_bandwidth'
	option 'gw_mode'
	option 'gw_sel_class'
	option 'log_level' 'all'
	option 'orig_interval' '500'
	option 'vis_mode'
	option 'bridge_loop_avoidance' '1'
	option 'distributed_arp_table'
	option 'network_coding'
	option 'hop_penalty'

# yet another batX instance
# config 'mesh' 'bat5'
#	option 'interfaces' 'second_mesh'

Re: [B.A.T.M.A.N.] question about batman-adv auto run

[Marek Lindner]

[-- Attachment #1: Type: text/plain, Size: 952 bytes --]

On Sunday 15 June 2014 15:49:35 michael.holcman1@free.fr wrote:
> Do you know how to auto run batman-adv, because, i have no answer where i
> write:/etc/init.d enable ?
> 
> Where i can located the configure fils as following ?
> 
> 
> config 'mesh' 'bat0'
>         option 'interface' 'wlan0' 'bride'
>         option 'aggregated_ogms'
>         option 'ap_isolation'
>         option 'bonding'
>         option 'fragmentation'
>         option 'gw_bandwidth'
>         option 'gw_mode'
>         option 'gw_sel_class'
>         option 'log_level' 'all'
>         option 'orig_interval' '500'
>         option 'vis_mode'
>         option 'bridge_loop_avoidance' '1'
>         option 'distributed_arp_table'
>         option 'network_coding'
>         option 'hop_penalty'

Are we talking about batman-adv on OpenWrt ? If so, you can read our 
documentation: 
http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config


Cheers,
Marek

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [B.A.T.M.A.N.] question about batman-adv auto run

[cmsv]

[-- Attachment #1: Type: text/plain, Size: 918 bytes --]

This is available only in openwrt based systems.
It is in /etc/config/

There is no /etc/init.d for batman-adv. it is started along the network
setup.

On 06/15/2014 09:49 AM, michael.holcman1@free.fr wrote:
> Hello,
> Do you know how to auto run batman-adv, because, i have no answer where i write:/etc/init.d enable ?
> 
> Where i can located the configure fils as following ?
> 
> 
> config 'mesh' 'bat0'
> 	option 'interface' 'wlan0' 'bride'
> 	option 'aggregated_ogms'
> 	option 'ap_isolation'
> 	option 'bonding'
> 	option 'fragmentation'
> 	option 'gw_bandwidth'
> 	option 'gw_mode'
> 	option 'gw_sel_class'
> 	option 'log_level' 'all'
> 	option 'orig_interval' '500'
> 	option 'vis_mode'
> 	option 'bridge_loop_avoidance' '1'
> 	option 'distributed_arp_table'
> 	option 'network_coding'
> 	option 'hop_penalty'
> 
> # yet another batX instance
> # config 'mesh' 'bat5'
> #	option 'interfaces' 'second_mesh'
> 

[-- Attachment #2: 0x15C4B382.asc --]
[-- Type: application/pgp-keys, Size: 36238 bytes --]

Re: [B.A.T.M.A.N.] question about batman-adv auto run

[michael.holcman1]

Yes, this on open wrt.

----- Mail original -----
De: "Marek Lindner" <mareklindner@neomailbox.ch>
À: "b a t m a n" <b.a.t.m.a.n@lists.open-mesh.org>
Cc: "michael holcman1" <michael.holcman1@free.fr>, martin@hundeboll.net
Envoyé: Dimanche 15 Juin 2014 16:41:57
Objet: Re: [B.A.T.M.A.N.] question about batman-adv auto run

On Sunday 15 June 2014 15:49:35 michael.holcman1@free.fr wrote:
> Do you know how to auto run batman-adv, because, i have no answer where i
> write:/etc/init.d enable ?
> 
> Where i can located the configure fils as following ?
> 
> 
> config 'mesh' 'bat0'
>         option 'interface' 'wlan0' 'bride'
>         option 'aggregated_ogms'
>         option 'ap_isolation'
>         option 'bonding'
>         option 'fragmentation'
>         option 'gw_bandwidth'
>         option 'gw_mode'
>         option 'gw_sel_class'
>         option 'log_level' 'all'
>         option 'orig_interval' '500'
>         option 'vis_mode'
>         option 'bridge_loop_avoidance' '1'
>         option 'distributed_arp_table'
>         option 'network_coding'
>         option 'hop_penalty'

Are we talking about batman-adv on OpenWrt ? If so, you can read our 
documentation: 
http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config


Cheers,
Marek

Re: [B.A.T.M.A.N.] question about batman-adv auto run

[michael.holcman1]

Ok,
-I have the open wrt OS.If i understand, the configuration file as to be in the  /etc/config/ and it started alone ?

-Is my configuration correct ?


thank's,


----- Mail original -----
De: "cmsv" <cmsv@wirelesspt.net>
À: "michael holcman1" <michael.holcman1@free.fr>
Cc: "The list for a Better Approach To Mobile Ad-hoc Networking" <b.a.t.m.a.n@lists.open-mesh.org>
Envoyé: Dimanche 15 Juin 2014 16:45:10
Objet: Re: [B.A.T.M.A.N.] question about batman-adv auto run

This is available only in openwrt based systems.
It is in /etc/config/

There is no /etc/init.d for batman-adv. it is started along the network
setup.

On 06/15/2014 09:49 AM, michael.holcman1@free.fr wrote:
> Hello,
> Do you know how to auto run batman-adv, because, i have no answer where i write:/etc/init.d enable ?
> 
> Where i can located the configure fils as following ?
> 
> 
> config 'mesh' 'bat0'
> 	option 'interface' 'wlan0' 'bride'
> 	option 'aggregated_ogms'
> 	option 'ap_isolation'
> 	option 'bonding'
> 	option 'fragmentation'
> 	option 'gw_bandwidth'
> 	option 'gw_mode'
> 	option 'gw_sel_class'
> 	option 'log_level' 'all'
> 	option 'orig_interval' '500'
> 	option 'vis_mode'
> 	option 'bridge_loop_avoidance' '1'
> 	option 'distributed_arp_table'
> 	option 'network_coding'
> 	option 'hop_penalty'
> 
> # yet another batX instance
> # config 'mesh' 'bat5'
> #	option 'interfaces' 'second_mesh'
> 

Re: [B.A.T.M.A.N.] question about batman-adv auto run

[Marek Lindner]

[-- Attachment #1: Type: text/plain, Size: 437 bytes --]

On Sunday 15 June 2014 18:45:54 michael.holcman1@free.fr wrote:
> Yes, this on open wrt.

Then please read our documentation. This page explains what needs to be done 
to get batman-adv working on OpenWrt:

http://www.open-mesh.org/projects/batman-adv/wiki/Building-with-openwrt

This page explains the configuration settings in greater detail:

http://www.open-mesh.org/projects/batman-adv/wiki/Batman-adv-openwrt-config

Cheers,
Marek

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 473 bytes --]

Re: [B.A.T.M.A.N.] question about batman-adv auto run configuration

[michael.holcman1]

[-- Attachment #1: Type: text/plain, Size: 2234 bytes --]

Hello,
If i andersdood all the configuration in my following architecture, if i want to give IP address on each interfaces,i have to:
- create a bridge on the PC,Wifi card and LTE card
- creat a bat0 interface on each one,
- i don't need to start /etc/conf/batman-adv enable since, when i installed kmod-batman-adv, i throw all the batman process.
   
I placed the config on the attached files

Tank's a lot for your help,


----- Mail original -----
De: "michael holcman1" <michael.holcman1@free.fr>
À: cmsv@wirelesspt.net
Cc: "The list for a Better Approach To Mobile Ad-hoc Networking" <b.a.t.m.a.n@lists.open-mesh.org>, "Marek Lindner" <mareklindner@neomailbox.ch>
Envoyé: Dimanche 15 Juin 2014 18:54:33
Objet: Re: [B.A.T.M.A.N.] question about batman-adv auto run

Ok,
-I have the open wrt OS.If i understand, the configuration file as to be in the  /etc/config/ and it started alone ?

-Is my configuration correct ?


thank's,


----- Mail original -----
De: "cmsv" <cmsv@wirelesspt.net>
À: "michael holcman1" <michael.holcman1@free.fr>
Cc: "The list for a Better Approach To Mobile Ad-hoc Networking" <b.a.t.m.a.n@lists.open-mesh.org>
Envoyé: Dimanche 15 Juin 2014 16:45:10
Objet: Re: [B.A.T.M.A.N.] question about batman-adv auto run

This is available only in openwrt based systems.
It is in /etc/config/

There is no /etc/init.d for batman-adv. it is started along the network
setup.

On 06/15/2014 09:49 AM, michael.holcman1@free.fr wrote:
> Hello,
> Do you know how to auto run batman-adv, because, i have no answer where i write:/etc/init.d enable ?
> 
> Where i can located the configure fils as following ?
> 
> 
> config 'mesh' 'bat0'
> 	option 'interface' 'wlan0' 'bride'
> 	option 'aggregated_ogms'
> 	option 'ap_isolation'
> 	option 'bonding'
> 	option 'fragmentation'
> 	option 'gw_bandwidth'
> 	option 'gw_mode'
> 	option 'gw_sel_class'
> 	option 'log_level' 'all'
> 	option 'orig_interval' '500'
> 	option 'vis_mode'
> 	option 'bridge_loop_avoidance' '1'
> 	option 'distributed_arp_table'
> 	option 'network_coding'
> 	option 'hop_penalty'
> 
> # yet another batX instance
> # config 'mesh' 'bat5'
> #	option 'interfaces' 'second_mesh'
> 

[-- Attachment #2: Batman-adv_architecture.pdf --]
[-- Type: application/pdf, Size: 13641 bytes --]

[-- Attachment #3: batman-adv_lte_card --]
[-- Type: application/octet-stream, Size: 485 bytes --]


config 'mesh' 'bat0'
	option 'interface' '3g-wan6'
	option 'aggregated_ogms'
	option 'ap_isolation'
	option 'bonding'
	option 'fragmentation'
	option 'gw_bandwidth'
	option 'gw_mode'
	option 'gw_sel_class'
	option 'log_level' 'all'
	option 'orig_interval' '500'
	option 'vis_mode'
	option 'bridge_loop_avoidance' '1'
	option 'distributed_arp_table'
	option 'network_coding'
	option 'hop_penalty'

# yet another batX instance
# config 'mesh' 'bat5'
#	option 'interfaces' 'second_mesh'

[-- Attachment #4: batman-adv_wifi_card --]
[-- Type: application/octet-stream, Size: 484 bytes --]


config 'mesh' 'bat0'
	option 'interfaces' 'wlan0'
	option 'aggregated_ogms'
	option 'ap_isolation'
	option 'bonding'
	option 'fragmentation'
	option 'gw_bandwidth'
	option 'gw_mode'
	option 'gw_sel_class'
	option 'log_level' 'all'
	option 'orig_interval' '500'
	option 'vis_mode'
	option 'bridge_loop_avoidance' '1'
	option 'distributed_arp_table'
	option 'network_coding'
	option 'hop_penalty'

# yet another batX instance
# config 'mesh' 'bat5'
#	option 'interfaces' 'second_mesh'

[-- Attachment #5: bat-hosts --]
[-- Type: application/octet-stream, Size: 212 bytes --]

#fichier bat-hosts a configurer en fonction de l adresse mac wifi des cartes

A8:54:B2:67:31:E0 carte2_Wifi
A8:54:B2:67:2E:C1 carte1_Wifi
b8:70:f4:62:3c:e4 pc_interf_ethernet
b4:74:9f:f1:26:6c pc_interf_wireless

Re: [B.A.T.M.A.N.] question about batman-adv auto run configuration

[Simon Wunderlich]

> Hello,
> If i andersdood all the configuration in my following architecture, if i
> want to give IP address on each interfaces,i have to: - create a bridge on
> the PC,Wifi card and LTE card
> - creat a bat0 interface on each one,
> - i don't need to start /etc/conf/batman-adv enable since, when i installed
> kmod-batman-adv, i throw all the batman process.
> 
> I placed the config on the attached files
> 
> Tank's a lot for your help,

Hello Michael,

I don't think it's possible to use batman-adv over LTE (at least on raw LTE), 
since LTE is not an Ethernet Interface but an IP interface.

Cheers,
    Simon