Re: [B.A.T.M.A.N.] batctl: feature to filter nodes/clients

[Moritz Warning <moritzwarning@web.de>]

[-- Attachment #1: Type: text/plain, Size: 3021 bytes --]

Thanks for the response!

On 02/05/2015 01:34 PM, Simon Wunderlich wrote:
> Hi,
> 
> On Sunday 01 February 2015 14:15:16 Moritz Warning wrote:
>> Hi,
>>
>> I need to display the number of all nodes/clients as well as all neighbor
>> nodes/clients. This would be easy if batctl would be able to output the
>> respective list of mac addresses (batctl ... | wc -l).
>>
>> I've started writing a patch as part of a feature request:
>> http://www.open-mesh.org/issues/203
>>
>> But the problem is how to get the respective output form the debug tables.
>> I have been reading the docs, but have not been able
>> to understand the necessary information needed, no offense:
>>
>> http://www.open-mesh.org/projects/batman-adv/wiki/Understand-your-batman-adv
>> -network
>>
>> Some explanation beforehand:
>> Clients are computers not running batman-adv,
>> represented by the MAC address of its network interface.
>> Nodes are computers running batman-adv,
>> represented by the MAC address of its primary interface.
>>
>> List of all nodes:
>> Get all MACs from the 'Originator' column of the originator table
> 
> Note that this may also show secondary interfaces of your neighbors - you may 
> have to filter that against a list of primary interfaces you collect otherwise.
Ok, I wonder how I can filter out those secondary interface MAC addresses
of 1-hop neighbors.
Can those addresses be recognized by comparing it to the Nexthop column?
This seems to be the major problem for me right now.

> 
>>
>> List of all neighbor nodes:
>> Get all MACs from the 'Nexthop' column of the originator table
>> and make it a unique list.
> 
> That sounds about right, if you want to include all neighbors which are in 
> radio range (even if you are not currently sending to them). Alfred-vis for 
> example only considers neighbors which are actually chosen for some 
> connections. Again, you may include secondary interfaces.
>>
>> List of all clients:
>> Get all MACs of the 'Client' column of the transtable_local table
>> when it starts with a '*' character.
> 
> Yes, but you may want to filter out local mac addresses, which are configured on 
> top of VLANs on bridges.
Are those the MAC-addresses of the bridge interface. Say, when I bridge bat0 into
br-lan, then the MAC of br-lan will show up as client?

>>
>> List of all neighbor clients:
>> Get all MACs of the 'Client' column of the transtable_global table
>> when it starts with a '*' character and when the nodes own originator
>> MAC (of the primary interface?) is also in the 'Originator' column.
> 
> Yup, but in this case again you don't know what are clients and what are 
> bridges/vlans configured on top of your other nodes. That's going to be tricky 
> to filter.
> 
> How about you use alfred-vis or your own alfred-based service to do the 
> filtering properly? Some kind of distributed/centralized database would help on 
> the filtering job, IMHO.
> 
> Cheers,
>     Simon
> 



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 473 bytes --]