From: johnzeng <johnzeng2013@yahoo.com>
To: Sven Eckelmann <sven@narfation.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org,
"Linus Lüssing" <linus.luessing@c0d3.blue>
Subject: Re: i found time delay is very high and there are more caution info , if possible , please give me some advisement
Date: Mon, 24 Oct 2016 13:11:38 +0800 [thread overview]
Message-ID: <580D980A.1090707@yahoo.com> (raw)
In-Reply-To: <1744565.jjMyA2xSBQ@bentobox>
Hello Dear Sven and Linus:
You are right , and When i
check /sys/class/net/bat0/mesh/* and i found archlinux lost
network-coding .
They were connected via a single cable as you .
Whether i need use older batman version (batman-adv and batctl 2015.2 ) ?
and our version is newest version ( Linux alarmpi 4.4.26-1-ARCH ) and hardware platform is raspberry pi B , but
i search wiki , i found kernel 4.4 will usebatman 2015.2
https://www.open-mesh.org/projects/open-mesh/wiki/Download
linux 4.4 => batman-adv 2015.2 (get batctl 2015.2 fromhere <https://downloads.open-mesh.org/batman/stable/sources/batctl/>).
if batman-adv don't support archlinux really , whether ubuntu will support batman-adv .
Thanks
[root@alarmpi ~]# grep '' /sys/class/net/bat0/mesh/*
/sys/class/net/bat0/mesh/aggregated_ogms:enabled
/sys/class/net/bat0/mesh/ap_isolation:disabled
/sys/class/net/bat0/mesh/bonding:disabled
/sys/class/net/bat0/mesh/bridge_loop_avoidance:enabled
/sys/class/net/bat0/mesh/distributed_arp_table:enabled
/sys/class/net/bat0/mesh/fragmentation:enabled
/sys/class/net/bat0/mesh/gw_bandwidth:10.0/2.0 MBit
/sys/class/net/bat0/mesh/gw_mode:off
/sys/class/net/bat0/mesh/gw_sel_class:20
/sys/class/net/bat0/mesh/hop_penalty:30
/sys/class/net/bat0/mesh/isolation_mark:0x00000000/0x00000000
/sys/class/net/bat0/mesh/multicast_mode:enabled
/sys/class/net/bat0/mesh/orig_interval:1000
/sys/class/net/bat0/mesh/routing_algo:BATMAN_IV
next prev parent reply other threads:[~2016-10-24 5:11 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-21 14:31 i found time delay is very high and there are more caution info , if possible , please give me some advisement johnzeng
2016-10-21 14:43 ` [B.A.T.M.A.N.] " Sven Eckelmann
2016-10-21 15:11 ` [B.A.T.M.A.N.] High latency with batman-adv on ethernet Sven Eckelmann
2016-10-21 15:29 ` johnzeng
2016-10-21 15:53 ` Sven Eckelmann
2016-10-21 15:52 ` tiger
2016-10-24 5:11 ` johnzeng [this message]
2016-10-24 6:29 ` Sven Eckelmann
2016-10-24 9:08 ` johnzeng
2016-10-24 9:14 ` [B.A.T.M.A.N.] " Sven Eckelmann
2016-10-24 9:45 ` johnzeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=580D980A.1090707@yahoo.com \
--to=johnzeng2013@yahoo.com \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=linus.luessing@c0d3.blue \
--cc=sven@narfation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox