* if i hope to build relay network via batman-adv , whether i will obtain Networkcoding part via config menuconfig and compile?
@ 2016-11-03 9:32 johnzeng
2016-11-03 9:50 ` johnzeng
2016-11-03 11:43 ` johnzeng
0 siblings, 2 replies; 3+ messages in thread
From: johnzeng @ 2016-11-03 9:32 UTC (permalink / raw)
To: The list for a Better Approach To Mobile Ad-hoc Networking
Hello Dear Sir :
if i hope to build relay network via batman-adv , whether i will obtain
Networkcoding part via config menuconfig and compile.
whether i need config other except part A ?
Part A
batctl nc 0
echo 0 > /sys/class/net/bat0/mesh/network_coding
ip link set dev wlan0 promisc on
ip link set dev wlan0 mtu 1546
Thanks
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: if i hope to build relay network via batman-adv , whether i will obtain Networkcoding part via config menuconfig and compile?
2016-11-03 9:32 if i hope to build relay network via batman-adv , whether i will obtain Networkcoding part via config menuconfig and compile? johnzeng
@ 2016-11-03 9:50 ` johnzeng
2016-11-03 11:43 ` johnzeng
1 sibling, 0 replies; 3+ messages in thread
From: johnzeng @ 2016-11-03 9:50 UTC (permalink / raw)
To: The list for a Better Approach To Mobile Ad-hoc Networking
Hello Dear SIr :
When i compile the part , whether i need make
CONFIG_BATMAN_ADV_BATMAN_V=y at batman-adv-2016.2
Thanks
> Hello Dear Sir :
>
> if i hope to build relay network via batman-adv , whether i will obtain
> Networkcoding part via config menuconfig and compile.
>
> whether i need config other except part A ?
>
> Part A
>
> batctl nc 0
> echo 0 > /sys/class/net/bat0/mesh/network_coding
> ip link set dev wlan0 promisc on
> ip link set dev wlan0 mtu 1546
>
>
> Thanks
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: if i hope to build relay network via batman-adv , whether i will obtain Networkcoding part via config menuconfig and compile?
2016-11-03 9:32 if i hope to build relay network via batman-adv , whether i will obtain Networkcoding part via config menuconfig and compile? johnzeng
2016-11-03 9:50 ` johnzeng
@ 2016-11-03 11:43 ` johnzeng
1 sibling, 0 replies; 3+ messages in thread
From: johnzeng @ 2016-11-03 11:43 UTC (permalink / raw)
To: The list for a Better Approach To Mobile Ad-hoc Networking,
Sven Eckelmann
Hello Dear Sven:
there are /a clerical/ //error// about batctl nc and i compiled the part .
run these command in according to advisement for relay mode
batctl nc 1
echo 1 > /sys/class/net/bat0/mesh/network_coding
ip link set dev wlan0 promisc on
ip link set dev wlan0 mtu 1546
if i send a packet from host A to hostC via hostB, whether hostB will
open relay mode at layer2 .
Best Regards
TIger
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-11-03 11:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-03 9:32 if i hope to build relay network via batman-adv , whether i will obtain Networkcoding part via config menuconfig and compile? johnzeng
2016-11-03 9:50 ` johnzeng
2016-11-03 11:43 ` johnzeng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox