From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <581C8E11.6000708@yahoo.com> Date: Fri, 04 Nov 2016 21:33:05 +0800 From: johnzeng MIME-Version: 1.0 Subject: Re: i have a question ? How many relay nodes can be supported at NetworkCoding ( mtu 1546 ) . References: <581C7F4A.80104@yahoo.com> In-Reply-To: <581C7F4A.80104@yahoo.com> Content-Type: text/plain; charset=GB2312 Content-Transfer-Encoding: 7bit List-Id: The list for a Better Approach To Mobile Ad-hoc Networking List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: The list for a Better Approach To Mobile Ad-hoc Networking Hello Dear Sir: if anybody know the part , please give me some advisement . Thanks > > Hello Dear Sir : > > i read some detail about NetworkCoding , my understanding : > > every relay node will detects neighbors packet at promisc mode and > combine these packet into a single transmission , > > and every relay mode will keep some usaful ( Ingoing: c8:3a:35:c9:ce:71 > .... ) and they will add some encoded information into packet > ( will send destination ) > > So we will run the part --- ip link set dev wlan0 mtu 1546 ( more than > 1532 ) > > but i have a question ? How many relay nodes can be supported at > NetworkCoding ( mtu 1546 ) . > > > Thanks > > Tiger > > batctl nn > Node: c8:3a:35:c9:ce:71 > Ingoing: c8:3a:35:c9:ce:71 > Outgoing: c8:3a:35:c9:ce:71 > > [root@alarmpi ~]# batctl nc > enabled > > > [root@alarmpi ~]# batctl statistics > tx: 18 > tx_bytes: 2076 > tx_dropped: 32 > rx: 767 > rx_bytes: 33993 > forward: 0 > forward_bytes: 0 > mgmt_tx: 7956 > mgmt_tx_bytes: 542012 > mgmt_rx: 3132 > mgmt_rx_bytes: 222572 > frag_tx: 0 > frag_tx_bytes: 0 > frag_rx: 0 > frag_rx_bytes: 0 > frag_fwd: 0 > frag_fwd_bytes: 0 > tt_request_tx: 0 > tt_request_rx: 1 > tt_response_tx: 1 > tt_response_rx: 0 > tt_roam_adv_tx: 0 > tt_roam_adv_rx: 0 > dat_get_tx: 2 > dat_get_rx: 0 > dat_put_tx: 0 > dat_put_rx: 4 > dat_cached_reply_tx: 0 > nc_code: 0 > nc_code_bytes: 0 > nc_recode: 0 > nc_recode_bytes: 0 > nc_buffer: 17 > nc_decode: 0 > nc_decode_bytes: 0 > nc_decode_failed: 0 > nc_sniffed: 0