Openembedded Bitbake Development
 help / color / mirror / Atom feed
From: nick <xerofoify@gmail.com>
To: Trevor Woerner <twoerner@gmail.com>,
	openembedded-architecture
	<openembedded-architecture@lists.openembedded.org>
Cc: bitbake-devel <bitbake-devel@lists.openembedded.org>
Subject: Re: [Openembedded-architecture] Multi-configuration builds
Date: Sun, 19 Jun 2016 23:14:04 -0400	[thread overview]
Message-ID: <57675F7C.9020909@gmail.com> (raw)
In-Reply-To: <20160620024647.GA29701@openSUSE-i7.site>



On 2016-06-19 10:46 PM, Trevor Woerner wrote:
> On Fri 2016-06-10 @ 05:13:43 PM, Richard Purdie wrote:
>> On Fri, 2016-06-10 at 12:07 -0400, Trevor Woerner wrote:
>>> On Fri 2016-06-10 @ 04:33:29 PM, Richard Purdie wrote:
>>>> A few people have asked about multi-machine builds.
>>>
>>> Do you envision each config also pointing to individual bblayer
>>> configurations
>>> too? I.e. if I'm building for 3 different MACHINEs, with 3 different
>>> configs
>>> (local.conf?), then there would also be 3 different bblayers.conf's?
>>
>>
>> No, there is one local.conf and one bblayers.conf file and then three
>> different multiconfig files, each one of which sets a different
>> MACHINE.
>>
>> Would people really want to support different bblayer files? That would
>> complicate things quite a lot :/.
> 
> Personally I have a common "Downloads" directory (this is probably quite normal).
> 
> Then, I have a common "layers" directory in which I checkout every layer of
> which I'm aware. I also have a script that I run manually from time to time to
> keep each layer up to date (although it's capable of running any general git
> command on each git repository it finds one level beneath it):
> 	https://github.com/twoerner/oe-misc/blob/master/scripts/gitcmd.sh
> 
> I then create separate directories for each platform for which I'm interested
> in building (e.g. raspi2, raspi3, minnow, dragon, etc...). In each of those
> directories I have separate local.conf, bblayers.conf, sstate-cache, and tmp
> directories.
> 
> I know most will disagree with this arrangement (especially the separate
> sstate-cache directories) but it's a system that has evolved over time, each
> decision was made based on experience, and it works great for me!
> 
> It's been my experience that having too many layers in a build slows down the
> initial parsing stage noticeably and too often layers don't play well with
> each other. Also *many* build issues after an update can be fixed by blowing
> away tmp *and* sstate and starting over. Often, building for a particular
> board requires particular tweaks to local.conf (whether to enable a vendor
> license or to enable specific hardware/features) which don't apply to other
> boards and builds.
> 
> I'm happy with the speed of my builds, and I have enough disk space to
> maintain the multiple sstates/tmps/etc. *Most* of my builds are
> core-image-full-cmdline-type builds and I can crank one of those out from
> scratch in 20 minutes (assuming the majority of sources have already been
> downloaded). Although I do sometimes need chromium (which takes an hour on its
> own) and I used to do qt (which is also quite painful). So I can understand
> how sstate might be more useful to others, but for me, not so much.
I second Trevor on this unless your building gui or media based packages sstate
is not very useful if you have a modern system with a 4 to 8 core CPU with 8 to
16GB of ram. However if your trying to just do small tweaks to the same board and
test it may be of use as I use something similar for building the kernel called
ccache. Again as Trevor stated you may want to benchmark the results and see if
sstate actually decreases your build time by a significant margin i.e probably
more then half decreases your build speed. Otherwise I would agree with Trevor
and just not worry about sstate.
Cheers,
Nick 
> _______________________________________________
> Openembedded-architecture mailing list
> Openembedded-architecture@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-architecture
> 


  reply	other threads:[~2016-06-20  3:14 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-10 15:33 Multi-configuration builds Richard Purdie
2016-06-10 16:07 ` Trevor Woerner
2016-06-10 16:13   ` Richard Purdie
2016-06-13 13:48     ` [Openembedded-architecture] " Otavio Salvador
2016-06-13 14:20       ` Patrick Ohly
2016-06-20  2:46     ` Trevor Woerner
2016-06-20  3:14       ` nick [this message]
2016-06-21 13:26         ` [Openembedded-architecture] " Koen Kooi
2016-06-21 18:37           ` nick
2016-06-21 18:48             ` Koen Kooi
2016-06-21 19:18               ` nick

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57675F7C.9020909@gmail.com \
    --to=xerofoify@gmail.com \
    --cc=bitbake-devel@lists.openembedded.org \
    --cc=openembedded-architecture@lists.openembedded.org \
    --cc=twoerner@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox