From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
Alexei Starovoitov <ast@kernel.org>,
Andrew Lunn <andrew+netdev@lunn.ch>,
bpf@vger.kernel.org, Daniel Borkmann <daniel@iogearbox.net>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Jesper Dangaard Brouer <hawk@kernel.org>,
John Fastabend <john.fastabend@gmail.com>,
linux-arm-kernel@lists.infradead.org,
linux-stm32@st-md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Stanislav Fomichev <sdf@fomichev.me>
Subject: Re: [PATCH net-next] net: stmmac: convert priv->sph* to boolean and rename
Date: Tue, 18 Nov 2025 15:04:36 +0100 [thread overview]
Message-ID: <03d4583c-6063-46e9-b578-096d343beabc@bootlin.com> (raw)
In-Reply-To: <E1vLIDN-0000000Evur-2NLU@rmk-PC.armlinux.org.uk>
On 18/11/2025 10:41, Russell King (Oracle) wrote:
> priv->sph* only have 'true' and 'false' used with them, yet they are an
> int. Change their type to a bool, and rename to make their usage more
> clear.
>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Maxime
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 4 +--
> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 26 +++++++++----------
> .../stmicro/stmmac/stmmac_selftests.c | 2 +-
> .../net/ethernet/stmicro/stmmac/stmmac_xdp.c | 2 +-
> 4 files changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index e9ed5086c049..012b0a477255 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -254,8 +254,8 @@ struct stmmac_priv {
> int hwts_tx_en;
> bool tx_path_in_lpi_mode;
> bool tso;
> - int sph;
> - int sph_cap;
> + bool sph_active;
> + bool sph_capable;
> u32 sarc_type;
> u32 rx_riwt[MTL_MAX_RX_QUEUES];
> int hwts_rx_en;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index d08ff8f5ff15..db68c89316ec 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1523,7 +1523,7 @@ static int stmmac_init_rx_buffers(struct stmmac_priv *priv,
> buf->page_offset = stmmac_rx_offset(priv);
> }
>
> - if (priv->sph && !buf->sec_page) {
> + if (priv->sph_active && !buf->sec_page) {
> buf->sec_page = page_pool_alloc_pages(rx_q->page_pool, gfp);
> if (!buf->sec_page)
> return -ENOMEM;
> @@ -2109,7 +2109,7 @@ static int __alloc_dma_rx_desc_resources(struct stmmac_priv *priv,
> pp_params.offset = stmmac_rx_offset(priv);
> pp_params.max_len = dma_conf->dma_buf_sz;
>
> - if (priv->sph) {
> + if (priv->sph_active) {
> pp_params.offset = 0;
> pp_params.max_len += stmmac_rx_offset(priv);
> }
> @@ -3603,7 +3603,7 @@ static int stmmac_hw_setup(struct net_device *dev)
> }
>
> /* Enable Split Header */
> - sph_en = (priv->hw->rx_csum > 0) && priv->sph;
> + sph_en = (priv->hw->rx_csum > 0) && priv->sph_active;
> for (chan = 0; chan < rx_cnt; chan++)
> stmmac_enable_sph(priv, priv->ioaddr, sph_en, chan);
>
> @@ -4895,7 +4895,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
> break;
> }
>
> - if (priv->sph && !buf->sec_page) {
> + if (priv->sph_active && !buf->sec_page) {
> buf->sec_page = page_pool_alloc_pages(rx_q->page_pool, gfp);
> if (!buf->sec_page)
> break;
> @@ -4906,7 +4906,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue)
> buf->addr = page_pool_get_dma_addr(buf->page) + buf->page_offset;
>
> stmmac_set_desc_addr(priv, p, buf->addr);
> - if (priv->sph)
> + if (priv->sph_active)
> stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, true);
> else
> stmmac_set_desc_sec_addr(priv, p, buf->sec_addr, false);
> @@ -4941,12 +4941,12 @@ static unsigned int stmmac_rx_buf1_len(struct stmmac_priv *priv,
> int coe = priv->hw->rx_csum;
>
> /* Not first descriptor, buffer is always zero */
> - if (priv->sph && len)
> + if (priv->sph_active && len)
> return 0;
>
> /* First descriptor, get split header length */
> stmmac_get_rx_header_len(priv, p, &hlen);
> - if (priv->sph && hlen) {
> + if (priv->sph_active && hlen) {
> priv->xstats.rx_split_hdr_pkt_n++;
> return hlen;
> }
> @@ -4969,7 +4969,7 @@ static unsigned int stmmac_rx_buf2_len(struct stmmac_priv *priv,
> unsigned int plen = 0;
>
> /* Not split header, buffer is not available */
> - if (!priv->sph)
> + if (!priv->sph_active)
> return 0;
>
> /* Not last descriptor */
> @@ -6037,8 +6037,8 @@ static int stmmac_set_features(struct net_device *netdev,
> */
> stmmac_rx_ipc(priv, priv->hw);
>
> - if (priv->sph_cap) {
> - bool sph_en = (priv->hw->rx_csum > 0) && priv->sph;
> + if (priv->sph_capable) {
> + bool sph_en = (priv->hw->rx_csum > 0) && priv->sph_active;
> u32 chan;
>
> for (chan = 0; chan < priv->plat->rx_queues_to_use; chan++)
> @@ -6987,7 +6987,7 @@ int stmmac_xdp_open(struct net_device *dev)
> }
>
> /* Adjust Split header */
> - sph_en = (priv->hw->rx_csum > 0) && priv->sph;
> + sph_en = (priv->hw->rx_csum > 0) && priv->sph_active;
>
> /* DMA RX Channel Configuration */
> for (chan = 0; chan < rx_cnt; chan++) {
> @@ -7736,8 +7736,8 @@ int stmmac_dvr_probe(struct device *device,
> if (priv->dma_cap.sphen &&
> !(priv->plat->flags & STMMAC_FLAG_SPH_DISABLE)) {
> ndev->hw_features |= NETIF_F_GRO;
> - priv->sph_cap = true;
> - priv->sph = priv->sph_cap;
> + priv->sph_capable = true;
> + priv->sph_active = priv->sph_capable;
> dev_info(priv->device, "SPH feature enabled\n");
> }
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
> index a01bc394d1ac..e90a2c469b9a 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c
> @@ -1721,7 +1721,7 @@ static int stmmac_test_sph(struct stmmac_priv *priv)
> struct stmmac_packet_attrs attr = { };
> int ret;
>
> - if (!priv->sph)
> + if (!priv->sph_active)
> return -EOPNOTSUPP;
>
> /* Check for UDP first */
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.c
> index aa6f16d3df64..d7e4db7224b0 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_xdp.c
> @@ -129,7 +129,7 @@ int stmmac_xdp_set_prog(struct stmmac_priv *priv, struct bpf_prog *prog,
> bpf_prog_put(old_prog);
>
> /* Disable RX SPH for XDP operation */
> - priv->sph = priv->sph_cap && !stmmac_xdp_is_enabled(priv);
> + priv->sph_active = priv->sph_capable && !stmmac_xdp_is_enabled(priv);
>
> if (if_running && need_update)
> stmmac_xdp_open(dev);
next prev parent reply other threads:[~2025-11-18 14:04 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-18 9:41 [PATCH net-next] net: stmmac: convert priv->sph* to boolean and rename Russell King (Oracle)
2025-11-18 14:04 ` Maxime Chevallier [this message]
2025-11-19 16:40 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03d4583c-6063-46e9-b578-096d343beabc@bootlin.com \
--to=maxime.chevallier@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=andrew@lunn.ch \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hawk@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=sdf@fomichev.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox