[PATCH v3 bpf-next 10/19] bpf: randomize high 32-bit when BPF_F_TEST_RND_HI32 is set

[Jiong Wang <jiong.wang@netronome.com>]

This patch randomizes high 32-bit of a definition when BPF_F_TEST_RND_HI32
is set.

It does this once the flag set no matter there is hardware zero extension
support or not. Because this is a test feature and we want to deliver the
most stressful test.

Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
---
 kernel/bpf/verifier.c | 85 ++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 68 insertions(+), 17 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 016f81d..eb00232 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -7551,24 +7551,70 @@ static int opt_remove_nops(struct bpf_verifier_env *env)
 	return 0;
 }
 
-static int opt_subreg_zext_lo32(struct bpf_verifier_env *env)
+static int opt_subreg_zext_lo32_rnd_hi32(struct bpf_verifier_env *env,
+					 const union bpf_attr *attr)
 {
 	struct bpf_insn_aux_data orig_aux, *aux = env->insn_aux_data;
+	struct bpf_insn *patch, zext_patch[3], rnd_hi32_patch[4];
+	int i, patch_len, delta = 0, len = env->prog->len;
 	struct bpf_insn *insns = env->prog->insnsi;
-	int i, delta = 0, len = env->prog->len;
-	struct bpf_insn zext_patch[3];
 	struct bpf_prog *new_prog;
+	bool rnd_hi32;
+
+	rnd_hi32 = attr->prog_flags & BPF_F_TEST_RND_HI32;
 
 	zext_patch[1] = BPF_ALU64_IMM(BPF_LSH, 0, 32);
 	zext_patch[2] = BPF_ALU64_IMM(BPF_RSH, 0, 32);
+	rnd_hi32_patch[1] = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, 0);
+	rnd_hi32_patch[2] = BPF_ALU64_IMM(BPF_LSH, BPF_REG_AX, 32);
+	rnd_hi32_patch[3] = BPF_ALU64_REG(BPF_OR, 0, BPF_REG_AX);
 	for (i = 0; i < len; i++) {
 		int adj_idx = i + delta;
 		struct bpf_insn insn;
 
-		if (!aux[adj_idx].zext_dst)
+		insn = insns[adj_idx];
+		if (!aux[adj_idx].zext_dst) {
+			u8 code, class;
+			u32 imm_rnd;
+
+			if (!rnd_hi32)
+				continue;
+
+			code = insn.code;
+			class = BPF_CLASS(code);
+			/* Insns doesn't define any value. */
+			if (class == BPF_JMP || class == BPF_JMP32 ||
+			    class == BPF_STX || class == BPF_ST)
+				continue;
+
+			/* NOTE: arg "reg" is only used for BPF_STX, as it has
+			 *       been ruled out in above check, it is safe to
+			 *       pass NULL here.
+			 */
+			if (is_reg64(env, &insn, insn.dst_reg, NULL, DST_OP)) {
+				if (class == BPF_LD &&
+				    BPF_MODE(code) == BPF_IMM)
+					i++;
+				continue;
+			}
+
+			/* ctx load could be transformed into wider load. */
+			if (class == BPF_LDX &&
+			    aux[adj_idx].ptr_type == PTR_TO_CTX)
+				continue;
+
+			imm_rnd = get_random_int();
+			rnd_hi32_patch[0] = insns[adj_idx];
+			rnd_hi32_patch[1].imm = imm_rnd;
+			rnd_hi32_patch[3].dst_reg = insn.dst_reg;
+			patch = rnd_hi32_patch;
+			patch_len = 4;
+			goto apply_patch_buffer;
+		}
+
+		if (bpf_jit_hardware_zext())
 			continue;
 
-		insn = insns[adj_idx];
 		/* "adjust_insn_aux_data" only retains the original insn aux
 		 * data if insn at patched offset is at the end of the patch
 		 * buffer. That is to say, given the following insn sequence:
@@ -7611,15 +7657,18 @@ static int opt_subreg_zext_lo32(struct bpf_verifier_env *env)
 		zext_patch[0] = insns[adj_idx];
 		zext_patch[1].dst_reg = insn.dst_reg;
 		zext_patch[2].dst_reg = insn.dst_reg;
+		patch = zext_patch;
+		patch_len = 3;
+apply_patch_buffer:
 		memcpy(&orig_aux, &aux[adj_idx], sizeof(orig_aux));
-		new_prog = bpf_patch_insn_data(env, adj_idx, zext_patch, 3);
+		new_prog = bpf_patch_insn_data(env, adj_idx, patch, patch_len);
 		if (!new_prog)
 			return -ENOMEM;
 		env->prog = new_prog;
 		insns = new_prog->insnsi;
 		aux = env->insn_aux_data;
 		memcpy(&aux[adj_idx], &orig_aux, sizeof(orig_aux));
-		delta += 2;
+		delta += patch_len - 1;
 	}
 
 	return 0;
@@ -8456,16 +8505,18 @@ int bpf_check(struct bpf_prog **prog, union bpf_attr *attr,
 	if (ret == 0)
 		ret = check_max_stack_depth(env);
 
-	/* Instruction rewrites happen after this point.
-	 * For offload target, finalize hook has all aux insn info, do any
-	 * customized work there.
-	 */
-	if (ret == 0 && !bpf_jit_hardware_zext() &&
-	    !bpf_prog_is_dev_bound(env->prog->aux)) {
-		ret = opt_subreg_zext_lo32(env);
-		env->prog->aux->no_verifier_zext = !!ret;
-	} else {
-		env->prog->aux->no_verifier_zext = true;
+	/* Instruction rewrites happen after this point. */
+	if (ret == 0) {
+		if (bpf_prog_is_dev_bound(env->prog->aux)) {
+			/* For offload target, finalize hook has all aux insn
+			 * info, copy the analysis result at there.
+			 */
+			env->prog->aux->no_verifier_zext = true;
+		} else {
+			ret = opt_subreg_zext_lo32_rnd_hi32(env, attr);
+			env->prog->aux->no_verifier_zext =
+				bpf_jit_hardware_zext() ? true : !!ret;
+		}
 	}
 
 	if (is_priv) {
-- 
2.7.4