BPF List
 help / color / mirror / Atom feed
From: Alexander Lobakin <alexandr.lobakin@intel.com>
To: Alexei Starovoitov <ast@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	Andrii Nakryiko <andrii@kernel.org>
Cc: "Alexander Lobakin" <alexandr.lobakin@intel.com>,
	"Maciej Fijalkowski" <maciej.fijalkowski@intel.com>,
	"Magnus Karlsson" <magnus.karlsson@intel.com>,
	"Toke Høiland-Jørgensen" <toke@redhat.com>,
	"Martin KaFai Lau" <martin.lau@linux.dev>,
	"Song Liu" <song@kernel.org>,
	"Jesper Dangaard Brouer" <hawk@kernel.org>,
	"Jakub Kicinski" <kuba@kernel.org>,
	bpf@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH bpf-next 6/6] ice: micro-optimize .ndo_xdp_xmit() path
Date: Fri, 10 Feb 2023 18:06:18 +0100	[thread overview]
Message-ID: <20230210170618.1973430-7-alexandr.lobakin@intel.com> (raw)
In-Reply-To: <20230210170618.1973430-1-alexandr.lobakin@intel.com>

After the recent mbuf changes, ice_xmit_xdp_ring() became a 3-liner.
It makes no sense to keep it global in a different file than its caller.
Move it just next to the sole call site and mark static. Also, it
doesn't need a full xdp_convert_frame_to_buff(). Save several cycles
and fill only the fields used by __ice_xmit_xdp_ring() later on.
Finally, since it doesn't modify @xdpf anyhow, mark the argument const
to save some more (whole -11 bytes of .text! :D).

Thanks to 1 jump less and less calcs as well, this yields as many as
6.7 Mpps per queue. `xdp.data_hard_start = xdpf` is fully intentional
again (see xdp_convert_buff_to_frame()) and just works when there are
no source device's driver issues.

Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_txrx.c     | 21 ++++++++++++++++++-
 drivers/net/ethernet/intel/ice/ice_txrx_lib.c | 13 ------------
 drivers/net/ethernet/intel/ice/ice_txrx_lib.h |  1 -
 3 files changed, 20 insertions(+), 15 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index e451276a37b6..aaf313a95368 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -605,6 +605,25 @@ ice_run_xdp(struct ice_rx_ring *rx_ring, struct xdp_buff *xdp,
 		ice_set_rx_bufs_act(xdp, rx_ring, ret);
 }
 
+/**
+ * ice_xmit_xdp_ring - submit frame to XDP ring for transmission
+ * @xdpf: XDP frame that will be converted to XDP buff
+ * @xdp_ring: XDP ring for transmission
+ */
+static int ice_xmit_xdp_ring(const struct xdp_frame *xdpf,
+			     struct ice_tx_ring *xdp_ring)
+{
+	struct xdp_buff xdp;
+
+	xdp.data_hard_start = (void *)xdpf;
+	xdp.data = xdpf->data;
+	xdp.data_end = xdp.data + xdpf->len;
+	xdp.frame_sz = xdpf->frame_sz;
+	xdp.flags = xdpf->flags;
+
+	return __ice_xmit_xdp_ring(&xdp, xdp_ring, true);
+}
+
 /**
  * ice_xdp_xmit - submit packets to XDP ring for transmission
  * @dev: netdev
@@ -650,7 +669,7 @@ ice_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames,
 
 	tx_buf = &xdp_ring->tx_buf[xdp_ring->next_to_use];
 	for (i = 0; i < n; i++) {
-		struct xdp_frame *xdpf = frames[i];
+		const struct xdp_frame *xdpf = frames[i];
 		int err;
 
 		err = ice_xmit_xdp_ring(xdpf, xdp_ring);
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx_lib.c b/drivers/net/ethernet/intel/ice/ice_txrx_lib.c
index 6d98c34d99fc..7bc5aa340c7d 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx_lib.c
@@ -434,19 +434,6 @@ int __ice_xmit_xdp_ring(struct xdp_buff *xdp, struct ice_tx_ring *xdp_ring,
 	return ICE_XDP_CONSUMED;
 }
 
-/**
- * ice_xmit_xdp_ring - submit frame to XDP ring for transmission
- * @xdpf: XDP frame that will be converted to XDP buff
- * @xdp_ring: XDP ring for transmission
- */
-int ice_xmit_xdp_ring(struct xdp_frame *xdpf, struct ice_tx_ring *xdp_ring)
-{
-	struct xdp_buff xdp;
-
-	xdp_convert_frame_to_buff(xdpf, &xdp);
-	return __ice_xmit_xdp_ring(&xdp, xdp_ring, true);
-}
-
 /**
  * ice_finalize_xdp_rx - Bump XDP Tx tail and/or flush redirect map
  * @xdp_ring: XDP ring
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx_lib.h b/drivers/net/ethernet/intel/ice/ice_txrx_lib.h
index 79efc20c46d9..115969ecdf7b 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx_lib.h
+++ b/drivers/net/ethernet/intel/ice/ice_txrx_lib.h
@@ -142,7 +142,6 @@ static inline u32 ice_set_rs_bit(const struct ice_tx_ring *xdp_ring)
 
 void ice_finalize_xdp_rx(struct ice_tx_ring *xdp_ring, unsigned int xdp_res, u32 first_idx);
 int ice_xmit_xdp_buff(struct xdp_buff *xdp, struct ice_tx_ring *xdp_ring);
-int ice_xmit_xdp_ring(struct xdp_frame *xdpf, struct ice_tx_ring *xdp_ring);
 int __ice_xmit_xdp_ring(struct xdp_buff *xdp, struct ice_tx_ring *xdp_ring,
 			bool frame);
 void ice_release_rx_desc(struct ice_rx_ring *rx_ring, u16 val);
-- 
2.39.1


  parent reply	other threads:[~2023-02-10 17:11 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-10 17:06 [PATCH bpf-next 0/6] ice: post-mbuf fixes Alexander Lobakin
2023-02-10 17:06 ` [PATCH bpf-next 1/6] ice: fix ice_tx_ring::xdp_tx_active underflow Alexander Lobakin
2023-02-10 17:06 ` [PATCH bpf-next 2/6] ice: fix XDP Tx ring overrun Alexander Lobakin
2023-02-10 17:06 ` [PATCH bpf-next 3/6] ice: remove two impossible branches on XDP Tx cleaning Alexander Lobakin
2023-02-10 17:06 ` [PATCH bpf-next 4/6] ice: robustify cleaning/completing XDP Tx buffers Alexander Lobakin
2023-02-10 17:06 ` [PATCH bpf-next 5/6] ice: fix freeing XDP frames backed by Page Pool Alexander Lobakin
2023-02-10 17:06 ` Alexander Lobakin [this message]
2023-02-10 18:09 ` [PATCH bpf-next 0/6] ice: post-mbuf fixes Toke Høiland-Jørgensen
2023-02-13 14:53   ` Alexander Lobakin
2023-02-13 17:57 ` Maciej Fijalkowski
2023-02-13 18:21 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230210170618.1973430-7-alexandr.lobakin@intel.com \
    --to=alexandr.lobakin@intel.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=hawk@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.fijalkowski@intel.com \
    --cc=magnus.karlsson@intel.com \
    --cc=martin.lau@linux.dev \
    --cc=netdev@vger.kernel.org \
    --cc=song@kernel.org \
    --cc=toke@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox