From: "Paul E. McKenney" <paulmck@kernel.org>
To: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel-team@meta.com,
rostedt@goodmis.org, "Paul E. McKenney" <paulmck@kernel.org>,
Alexei Starovoitov <ast@kernel.org>,
Andrii Nakryiko <andrii@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Kent Overstreet <kent.overstreet@linux.dev>,
bpf@vger.kernel.org
Subject: [PATCH rcu 11/15] rcutorture: Add reader_flavor parameter for SRCU readers
Date: Tue, 15 Oct 2024 09:11:08 -0700 [thread overview]
Message-ID: <20241015161112.442758-11-paulmck@kernel.org> (raw)
In-Reply-To: <ddf64299-de71-41a2-b575-56ec173faf75@paulmck-laptop>
This commit adds an rcutorture.reader_flavor parameter whose bits
correspond to reader flavors. For example, SRCU's readers are 0x1 for
normal and 0x2 for NMI-safe.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <bpf@vger.kernel.org>
---
.../admin-guide/kernel-parameters.txt | 8 +++++
kernel/rcu/rcutorture.c | 30 ++++++++++++++-----
2 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1518343bbe223..52922727006fc 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -5426,6 +5426,14 @@
The delay, in seconds, between successive
read-then-exit testing episodes.
+ rcutorture.reader_flavor= [KNL]
+ A bit mask indicating which readers to use.
+ If there is more than one bit set, the readers
+ are entered from low-order bit up, and are
+ exited in the opposite order. For SRCU, the
+ 0x1 bit is normal readers and the 0x2 bit is
+ for NMI-safe readers.
+
rcutorture.shuffle_interval= [KNL]
Set task-shuffle interval (s). Shuffling tasks
allows some CPUs to go into dyntick-idle mode
diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index f96ab98f8182f..405decec33677 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -111,6 +111,7 @@ torture_param(int, nocbs_nthreads, 0, "Number of NOCB toggle threads, 0 to disab
torture_param(int, nocbs_toggle, 1000, "Time between toggling nocb state (ms)");
torture_param(int, read_exit_delay, 13, "Delay between read-then-exit episodes (s)");
torture_param(int, read_exit_burst, 16, "# of read-then-exit bursts per episode, zero to disable");
+torture_param(int, reader_flavor, 0x1, "Reader flavors to use, one per bit.");
torture_param(int, shuffle_interval, 3, "Number of seconds between shuffles");
torture_param(int, shutdown_secs, 0, "Shutdown time (s), <= zero to disable.");
torture_param(int, stall_cpu, 0, "Stall duration (s), zero to disable.");
@@ -644,10 +645,20 @@ static void srcu_get_gp_data(int *flags, unsigned long *gp_seq)
static int srcu_torture_read_lock(void)
{
- if (cur_ops == &srcud_ops)
- return srcu_read_lock_nmisafe(srcu_ctlp);
- else
- return srcu_read_lock(srcu_ctlp);
+ int idx;
+ int ret = 0;
+
+ if ((reader_flavor & 0x1) || !(reader_flavor & 0x7)) {
+ idx = srcu_read_lock(srcu_ctlp);
+ WARN_ON_ONCE(idx & ~0x1);
+ ret += idx;
+ }
+ if (reader_flavor & 0x2) {
+ idx = srcu_read_lock_nmisafe(srcu_ctlp);
+ WARN_ON_ONCE(idx & ~0x1);
+ ret += idx << 1;
+ }
+ return ret;
}
static void
@@ -671,10 +682,11 @@ srcu_read_delay(struct torture_random_state *rrsp, struct rt_read_seg *rtrsp)
static void srcu_torture_read_unlock(int idx)
{
- if (cur_ops == &srcud_ops)
- srcu_read_unlock_nmisafe(srcu_ctlp, idx);
- else
- srcu_read_unlock(srcu_ctlp, idx);
+ WARN_ON_ONCE((reader_flavor && (idx & ~reader_flavor)) || (!reader_flavor && (idx & ~0x1)));
+ if (reader_flavor & 0x2)
+ srcu_read_unlock_nmisafe(srcu_ctlp, (idx & 0x2) >> 1);
+ if ((reader_flavor & 0x1) || !(reader_flavor & 0x7))
+ srcu_read_unlock(srcu_ctlp, idx & 0x1);
}
static int torture_srcu_read_lock_held(void)
@@ -2389,6 +2401,7 @@ rcu_torture_print_module_parms(struct rcu_torture_ops *cur_ops, const char *tag)
"n_barrier_cbs=%d "
"onoff_interval=%d onoff_holdoff=%d "
"read_exit_delay=%d read_exit_burst=%d "
+ "reader_flavor=%x "
"nocbs_nthreads=%d nocbs_toggle=%d "
"test_nmis=%d\n",
torture_type, tag, nrealreaders, nfakewriters,
@@ -2401,6 +2414,7 @@ rcu_torture_print_module_parms(struct rcu_torture_ops *cur_ops, const char *tag)
n_barrier_cbs,
onoff_interval, onoff_holdoff,
read_exit_delay, read_exit_burst,
+ reader_flavor,
nocbs_nthreads, nocbs_toggle,
test_nmis);
}
--
2.40.1
next prev parent reply other threads:[~2024-10-15 16:11 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <ddf64299-de71-41a2-b575-56ec173faf75@paulmck-laptop>
2024-10-15 16:10 ` [PATCH rcu 01/15] srcu: Rename srcu_might_be_idle() to srcu_should_expedite() Paul E. McKenney
2024-10-15 16:10 ` [PATCH rcu 02/15] srcu: Introduce srcu_gp_is_expedited() helper function Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 03/15] srcu: Renaming in preparation for additional reader flavor Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 04/15] srcu: Bit manipulation changes " Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 05/15] srcu: Standardize srcu_data pointers to "sdp" and similar Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 07/15] srcu: Create CPP macros for normal and NMI-safe SRCU readers Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 08/15] srcu: Add srcu_read_lock_lite() and srcu_read_unlock_lite() Paul E. McKenney
2024-11-04 23:27 ` Frederic Weisbecker
2024-11-05 0:39 ` Paul E. McKenney
2024-11-11 11:17 ` Neeraj Upadhyay
2024-11-11 15:17 ` Paul E. McKenney
2024-11-11 17:46 ` Andrii Nakryiko
2024-11-11 17:51 ` Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 09/15] srcu: Allow inlining of __srcu_read_{,un}lock_lite() Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 10/15] rcutorture: Expand RCUTORTURE_RDR_MASK_[12] to eight bits Paul E. McKenney
2024-10-15 16:11 ` Paul E. McKenney [this message]
2024-11-12 4:42 ` [PATCH rcu 11/15] rcutorture: Add reader_flavor parameter for SRCU readers Neeraj Upadhyay
2024-11-12 19:27 ` Paul E. McKenney
2024-11-13 3:20 ` Neeraj Upadhyay
2024-10-15 16:11 ` [PATCH rcu 12/15] rcutorture: Add srcu_read_lock_lite() support to rcutorture.reader_flavor Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 13/15] rcutorture: Add light-weight SRCU scenario Paul E. McKenney
2024-10-15 16:11 ` [PATCH rcu 14/15] refscale: Add srcu_read_lock_lite() support using "srcu-lite" Paul E. McKenney
2024-10-29 0:25 ` [PATCH rcu v4 " Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241015161112.442758-11-paulmck@kernel.org \
--to=paulmck@kernel.org \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=kent.overstreet@linux.dev \
--cc=kernel-team@meta.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rcu@vger.kernel.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox